Fasteners, Hardware

  •
    Read More
    Quick View

    Pro-Tect System for Pool Enclosures

    PRO-TECT Fastener Protection System consists of a nylon sleeve and a cap that, together, cover and protect the anchor screw. The PRO-TECT nylon sleeve gives protection from electrolysis, providing worry-free installation while extending the life of the product. This is very important for the harsh conditions of the coastal environments and extreme temperatures.
    The PRO-TECT cap snaps onto the top of the nylon sleeve, covering the head of the Blue-Tap anchor screw. Due to its special design, the cap will not come off easily. Caps are available in White and Bronze.
    By repelling water and preventing penetration, PRO-TECT reduces or eliminates the need for warranty work, increasing life expectancy of the structures.

  •
    Quick View

    PanelMate Quick Kit

    This kit contains all of the hardware you need to get started making your home hurricane-resistant. There are 40 PanelMate anchors, along with the bit and driver to properly set them. There are also 40 washers and wing nuts to secure the storm panels to the anchors.

  •
    Quick View

    Aluminum Key Hole Washer

    Aluminum key-hole washers are commonly used with combo truss machine screws and sidewalk bolts. They are used as an additional backing plate when storm panels keyways do not line up correctly. They are also often used to provide additional backing when sidewalk bolts have been changed out to truss head screws. They can be placed on after panels are installed.

  •
    Read More
    Quick View

    Hanger Bolts

    Hanger bolts are a special type of stud that have a lag screw thread on one end and a machine screw thread on the other. They are ideal for tie-wire or overhead applications such as hanging ductwork, fixtures, or suspended electrical wiring from wood beams or walls.

    Our hanger bolts are available as either a plain finish, or zinc plating for corrosion resistance.

  •
    Read More
    Quick View

    Square Nuts, Zinc

    As the name implies, square nuts have a 4-sided, square design. This square profile provides a greater bearing surface when installing onto a bolt. Square nuts are designed for use with square headed bolts, and the large surface provides better resistance to loosening. When using square nuts, as with hex nuts, use flat washers of the correct size and material.

  •
    Read More
    Quick View

    T-Nuts

    T-nuts are barrel shaped fasteners with internal threading, and are used to provide an anchor point for a bolt in a piece of wood, whether a flat board or a dimensional piece. They are especially useful when a flush surface is wanted. T-nuts have a flat base with prongs bent up at 90° angles, parallel to the barrel. After pre-drilling a hole, the t-nut can be fixed in place either by tightening a bolt into it from the top, which pulls the prongs into the wood, or using hammer to pound the locking prongs into the wood until flush.

  •
    Read More
    Quick View

    F-Track Bolts

    The square head of these F-Track Bolts fits perfectly into all flat and angled storm panel F-Track.

  •
    Read More
    Quick View

    Sidewalk Bolt, Stainless Steel

    Also known as shutter screws, the ultra-wide truss head distributes the load over a large area for excellent holding pressure when placing plywood, metal, and fabric hurricane panels or removable track. Made of 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic.

  •
    Read More
    Quick View

    Mro Thread-Locker, 50ml Bottle

    MRO Solutions thread-locking products are anaerobic compounds formulated for sealing, joining, fastening, retaining, and generally locking together metal components. Unlike other thread-lockers, MRO compounds are non-surface sensitive, so they do not require use of primers for curing.
    Once parts are mated with MRO thread-lockers, they form a unitized assembly that resists vibration. In addition, the mated parts are sealed against attack from corrosion, internal rust, seizure, solvents, gases, and other chemicals.

  •
    Quick View

    PAM #8 X 2-1/2″ Roof Tile Screws

    Stainless steel tile roofing screws for use with the PAM auto-feed screw system. These screws are #8 x 2-1/2″ and used for attaching roof tile to wood. The type 17 point improves penetration of tile.
    Meets Miami-Dade County, FL Protocol PA 114-95, Appendix E, Section 2 (ASTM G85). Box of 1,000 screws.

  •
    Read More
    Quick View

    Dekfast Roof Screws, 10″ to 18″

    Dekfast XHD High Strength Fasteners are ideal for insulation attachment to wood and light gauge steel. The SD#1 point cuts through gravel, BUR and metal up to 18ga. Black Sentri SP long=life coating provides extended corrosion protection. The #3PH pan head is compatible with all Dekfast insulation stress and membrane seam plates.
    Longer sizes are available by special request.
    FM and Dade County Approved.

  •
    Quick View

    Buildex Trugrip Roof Screw, 1″

    Buildex® TrueGrip timber screws are suitable for fixing metal roofing into both hardwood and softwood timber battens. Their sharp point prevents screw-walking when starting to insert them. They also engage the material faster, and need less effort, for a safer installation environment.