Cut Off Wheel, Stationary, Double Reinforced
This cut off wheel is made with heavy duty fiberglass reinforcement, for high-speed machines, and demanding cutting tasks. It meets or exceeds all safety standards for all machines on the market.
- Description
- Abrasive Materials and Applications
- Data Sheets & Downloads
This cut off wheel is made with heavy duty fiberglass reinforcement, for high-speed machines, and demanding cutting tasks. It meets or exceeds all safety standards for all machines on the market.
Aluminum Oxide:
General purpose grain for clean cuts and long life.
For ferrous metals, stainless steel, non-ferrous metals, and general purpose
Safety Data Sheet (SDS), Vitrified Bond Abrasives
Safety Data Sheet (SDS), Resin Bonded Abrasives
Safety Data Sheet (SDS), Flap Disc Abrasives
Related Products
-
Read MoreQuick ViewTungsten Carbide Tipped Hole Cutters
If you need to cut through the toughest materials, these tungsten carbide tipped hole cutters are the perfect solution. Whether it is stainless steel, cast iron, high density resin, or metal plate and sheet metal, these cutters get the job done.
They cut up to 3/16″ deep (4″ bit cuts up to 1″ deep), and have a spring included around the pilot bit to eject the slug. Sizes from 11/16″ to 2″ have a 7/16″ shank, and above that have a 1/2″ shank.
Each hole cutter comes with a pilot bit, and replacement bits are available.
The 4-piece kit contains the 7/8″, 1-1/8″, and 1-3/8″ cutters, plus the pilot bit. -
Quick View
Exact TCT Tungsten Carbide Blade
The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
TCT 165: Blade with tungsten carbide tips for general use. Suitable for cutting steel, copper, aluminum and plastics. TCT blades can be sharpened a couple of times so they will become like new.6-1/2″ TCT CARBIDE BLADE FOR 360E STEEL-COPPER-PLASTICS
-
Quick View
Makita 1/4″, 3/8″ Threaded Rod Cutter, 18V LXT
Makita has delivered a cordless cutting solution for steel rod cutting with the 18V LXT® Brushless Cordless Threaded Rod Cutter. It will make up to 1,300 cuts of 3/8” coarse thread threaded rod and 1,200 cuts of 3/8” coarse thread stainless steel threaded rod with a 5.0Ah battery (sold separately). The compact design makes the XCS03Z ideal for overhead cutting of installed threaded rod. Provides spark-free cuts that are clean and burr-free allowing easy hand-threading of fastener or nut.
-
Read MoreQuick View
Mag-Bit Hack Saw Blades
MAG-BIT hack saw blades are ready to cut through pipe, tubing, and solids. Cuts wood, plastic, or any machinable metal including conduit, stainless steel tubing, copper tubing, structural materials, and angle iron.
With blade options of 14, 18, 24, or 32 Teeth Per Inch (TPI), these blades will let you finish your job quickly. -
Quick View
Diamond Vantage VHS 65 Gas Cut Off Saw
The VHS-65 is our featured high-speed gas saw by DIDA. It has a 14″ blade capacity that has up to a 5″ cutting depth, and that can be used wet or dry. It is built with an anti-vibration system to reduce operator fatigue. Engine starts are easy with the compression release valve, and a catalytic converter ensures low emission levels during use.
-
Read MoreQuick View
Bi-Metal Hole Saws
Bi-Metal hole saws are constructed using both High Speed Steel (HSS) for its strength, and spring steel for its flexibility. This allows fast cutting in a wide range of materials, with less breakage from tough jobs.
These hole saws also have a 4/6 variable pitch tooth combination to reduce vibration, and a deep cup for improved chip removal. -
Quick View
Makita 6-1/2″ Plunge Circular Saw, Corded
The Makita 6-1/2” Plunge Cut Circular Saw (model SP6000J) delivers precise and more accurate cutting when combined with an optional guide rail system constructed with anodized aluminum for smooth, straight cuts. The saw and rail system work together to produce accurate cuts with minimal tear-out. The saw combines a powerful 12 AMP motor and a large cutting capacity with magnesium components for less weight and electronic speed control to maintain constant speed under load for smooth cutting and a splinter-free mirror finish. The SP6000J is a more portable option to a table saw for select applications, and it is ideal for use on the jobsite or in a workshop.
Precision Settings and Features for Quality Cuts
The saw has a bevel capability of -1° to 48° with positive stops at 22.5° and 45°. The saw delivers precise cutting, as the position of the blade enters the material on the same cutting line whether cutting straight or bevel. In addition, the saw has close-to-wall cutting (11/16-inch) for expanded cutting applications. The built-in depth stop allows a preliminary cut of 1/16-inch to be performed before the entire material is cut through for clean and splinter-free cutting -
Quick View
Makita 5-7/8″ Metal Cutting Saw, 18V LXT
The 18V LXT® Brushless Cordless 5-7/8” Metal Cutting Saw (XSC04) delivers faster metal cutting through Unistrut®, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4″ cutting capacity, it is ideal for electrical contractors as it will cut 2” conduit in one pass – a huge time saver. It includes a transparent chip collector box to capture cutting debris. The brushless motor is engineered for efficiency, and in run-time testing the Saw made up to 125 cuts per charge in 1” SCH 40 pipe using an 18V 5.0Ah battery.
Makita offers optimum 5-7/8″ blade options for use with the XSC04: 32T carbide tipped for metal and general purpose; 52T for thin metal; 52T for aluminum; and 60T for stainless steel (all sold separately). -
Quick View
Exact Cermet Carbide Blade, 5-1/2″
The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
Cermet 140: Blade with ceramic alloy tips for heavy duty applications, especially for cutting stainless and acid proof steel. Cermet blades can be sharpened a couple of times so they will become like new.5-1/2″CERMET CARBIDE BLADE FOR STEEL-STAINLESS-COPPER-PLASTICS900
-
Quick View
Makita Multi Tool Kit w/ Cord
Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.
The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding.
