Flap Disk, High Density Zirconia, Type 27
CGW Flap discs blend and finish in one operation which replaces the traditional two-step grinding process of T27 grinding wheels and sanding discs. Flap discs provide a more consistent finish. CGW flap discs reduce processing time which increases productivity for lower parts finishing costs and provides an overall cost savings. CGW flap discs are engineered for full use of the coated abrasive material. Layering the abrasive cloth flaps allows the discs to wear evenly which constantly exposes new sharp grain.
The High Density Zirconia Flap Disk is for use on stainless steel, sheet metal, tool steels, heat-treated steels, and for the grinding & finishing of welds. For aggressive use on heavy duty applications.
CGW’S new ceramic flap disc is the best choice for grinding stainless steel, titanium, Inconel, and other hard metals. Using CGW’s ceramic flap disc will give a “cool grinding surface” since the grain has a self sharpening formula.
- Additional information
- Description
- Specifications
- Data Sheets & Downloads
Additional information
| Size, Arbor, and Type | 4-1/2″ X 7/8 X 36X HIGH DENSITY ZIRCONIA, 5″ X 7/8 X 40X HIGH DENSITY ZIRCONIA, 5″ X 7/8 X 40X HIGH DENSITY CERAMIC |
|---|
The High Density Zirconia Flap Disk is for use on stainless steel, sheet metal, tool steels, heat-treated steels, and for the grinding & finishing of welds. For aggressive use on heavy duty applications.
CGW'S new ceramic flap disc is the best choice for grinding stainless steel, titanium, Inconel, and other hard metals. Using CGW’s ceramic flap disc will give a "cool grinding surface" since the grain has a self sharpening formula.
Zirconia:
Abrasive Type Coated
Flap Disc Type Type 27
Disc Diameter (Inch) 4-1/2
Abrasive Material Zirconia Alumina
Grade Very Coarse
Grit 36
Attaching System Arbor
Center Hole Size 7/8
Backing Material Poly Cotton
Maximum RPM 13300
Series Z3
Ceramic:
Abrasive Type Coated
Disc Diameter (Inch) 5
Abrasive Material Ceramic
Grade Coarse
Grit 40
Attaching System Arbor
Center Hole Size 7/8
Backing Material Polyester
Maximum RPM 12200
Safety Data Sheet (SDS), Vitrified Bond Abrasives
Safety Data Sheet (SDS), Resin Bonded Abrasives
Safety Data Sheet (SDS), Flap Disc Abrasives
Related Products
-
Read MoreQuick ViewZEC Grinding Wheels
The ZEC dic contains a mix of A/O (Aluminum Oxide) S/C (Silicon Carbide). These grain types are very aggressive. The ZEC disc is flat with a plastic back. The ZEC fits most angle grinders and does not require a backing pad, but attaches directly to the spindle of the grinding machine. In comparison to depressed center wheels or resin fiber discs the ZEC is lighter, cuts faster, and grinds faster while leaving an even surface.
-
Quick ViewAircraft Drill Bits
Aircraft drill bits are long drill bits originally designed for use in the aircraft industry where they often need to drill holes reaching through deep cavities, and then through thin materials. You will find them invaluable for drilling holes in tight spaces, and drilling holes through long or wide pieces of wood.
-
Quick View
Heavy Duty Cobalt Drill Bits
Our Cobalt High Speed drill bits are made of high speed Cobalt Steel. The Cobalt content adds high abrasion resistance to the already hard working properties if our bits. Heavy web construction and 135 degree Split-Point add to the long life of these bits. Available in sizes 1/32″ – 1/2″.
-
Quick View
Rubber Back-Up Pad, without Nut
Rubber back-up pads are used with abrasive sanding and grinding discs. The rubber back-up pad has spiral ribs to provide contact points for the abrasive disc, and to form channels for air flow which extend the life of the disc by up to 50%.
-
Quick View
Impactech Phillips Insert and Power Bits
Made from S2 modified shock resistant steel for professional performance and durability. Featuring a patented spiral torsion zone absorbs impact and extends bit life. Proprietary precision CNC machined tips for excellent fit in fastener recess. Tested to outperform all leading brands in lifecycle and tip failure testing. -
Quick View
HSS Black Oxide Drill Bits
The HSS Black Oxide bits are made in the USA with a 118 degree point and are available from 1/32″ to 11/16″.e”]
-
Quick View
Flap Wheel Drum Adapter Kit
The Flap Wheel Drum Adapter Set allows CGW keyhole arbor drums to fit onto 5/8 – 11 spindles – including competitive surface finishing machines and variable speed right angle grinders.
The 3-piece set includes one spindle sleeve, one screw and one Allen wrench. Each piece is also available individually. -
Quick View
Ship Auger Drill Bits
Durable hardened cutting edge for long life in tough materials, including nail-embedded wood. Fully-forged bit for maximum durability. Wide flutes for maximum chip removal and less binding. Aggressive screw-pitch for faster drilling. 5/16″ – 1-1/2″ in 6″ and 18″ length.
-
Quick View
Mandrel Adapter, 1/4″ X 1/4″
The CGW 1/4″ x 1/4″ mandrel adapter is made for small diameter cut-off wheels with 1/4″ arbors. These mandrels can be used on electric or battery operated drills or on high speed air tools such as a die grinder.
-
Quick View
Spade Drill Bits
Spade bits are used for rough boring in wood. Spade bits are flat, with a centering point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. Intended for high speed use, they are used with electric hand drills. Spade bits are also sometimes referred to as “paddle bits”. Available in 1/4″ – 1-1/2″.
Made from S2 modified shock resistant steel for professional performance and durability. Featuring a patented spiral torsion zone absorbs impact and extends bit life. Proprietary precision CNC machined tips for excellent fit in fastener recess. Tested to outperform all leading brands in lifecycle and tip failure testing.
