Makita Power Assisted Wheelbarrow, 18V X2 LXT
18V X2 LXT® Lithium-Ion Brushless Cordless Power-Assisted Wheelbarrow (XUC01X1) is a convenient solution for material transport on job sites. You can use one or two Makita 18 Volt LXT® batteries: Use one 6 amp-hour battery and get up to 60 minutes of run time under load. For longer run time, drop in a second LXT® battery and double the run time.
- Description
- Features
Description
18V X2 LXT® Lithium-Ion Brushless Cordless Power-Assisted Wheelbarrow (XUC01X1) is a convenient solution for material transport on job sites. You can use one or two Makita 18 Volt LXT® batteries: Use one 6 amp-hour battery and get up to 60 minutes of run time under load. For longer run time, drop in a second LXT® battery and double the run time. Makita brushless motors are engineered for up to 50% longer run time, increased power and speed, and longer tool life, and the Hand-Truck/Wheelbarrow has a Makita-built BL™ Brushless Motor that provides high power efficiency for transporting up to 287 lbs. of material on job sites. It has 2 speed settings, with a maximum speed of 2.5 MPH on a 12-degree incline. For versatility and convenience, the wheelbarrow is reversible with side rails on the flat bed for easy up and down installation.
Additional accessories include a steel tube flat bed (sold separately) and steel bucket (included). For added convenience, the rear wheels can be detached and replaced with easy-installed L-shaped legs. L.E.D. lights are located on each side of frame help illuminate the work area. The Power-Assisted Hand Truck features Extreme Protection Technology (XPT™), engineered for increased dust and water resistance for operation in harsh job site conditions.
RUN TIME : Delivers up to 60 minutes of run time using one 18V LXT® 6.0Ah BL1860 battery
INNOVATION : Holds (2) 18V LXT® batteries but operates using (1) 18V battery at a time
POWER : 2-speed with maximum speed up to 2.5 MPH on a 12º incline
CONVENIENCE : Interchangeable steel bucket or steel tube flat bed (flat bed optional)
INCLUDES : Steel bucket, frame with motor and tire, rear wheels and L-shaped legs (steel flat bed frame not included)
Features
- Delivers up to 60 minutes of run time (distance equivalent to one mile) under load using one 18V LXT® 6.0Ah BL1860 battery
- Holds (2) 18V LXT® Lithium-Ion batteries but operates using (1) 18V battery at a time; utilizes second battery when needed
- Makita-built BL™ Brushless Motor for optimal performance
- 2-speed with maximum speed up to 2.5 MPH on a 12º incline
- Reversible for versatility and convenience
- Interchangeable steel bucket or steel tube flat bed (flat bed optional)
- Maximum load capacity up to 287 lbs.
- 7" mechanical disc brake for faster stopping
- L-shaped legs can be easily installed to replace rear wheels
- L.E.D. lights on each side of frame to illuminate the work area
- L.E.D. battery charge indicators show charge level for each 18V LXT® battery
- Weighs 88 lbs. with bucket for reduced operator fatigue
- Rubberized soft grip handles provide increased comfort on the job; adjust to 3 heights
- Features Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditions
- 3-year limited warranty
Related Products
-
Quick ViewMakita 3-1/2″ Stick Framing Nailer
The 21º Full Round Head 3-1/2″ Framing Nailer combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing/siding, and sub-flooring. It is ideal for framers, roofers and carpenters.
-
Quick View
Makita 1-3/4″ Coil Roofing Nailer
The Makita 1-3/4″ Roofing Coil Nailer combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter coil roofing nails, from 3/4” to 1-3/4” in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister.
Ease-of-use features include a “tool-less” depth adjustment, engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool. -
Quick View
Makita 2″ Brad Nailer 18 Gauge
Makita’s 2-inch Brad Nailer features a durable and compact design with ease-of-use features including a narrow-nose design that make it ideal for a wide variety of finish applications.
The AF505N can operate from 60 to 115 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch. The magazine capacity is up to 100 nails, with a quick release cam-lock to open the nail guide assembly to easily clear jams. -
Quick View
Makita Subcompact 11/16″ SDS‑PLUS Rotary Hammer Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V run time and compatibility with the world’s largest 18V cordless tool system. The 18V LXT® Sub-Compact Brushless 11/16” Rotary Hammer (accepts SDS-PLUS bits) is ideal for working in tight spaces and for overhead conditions.
The XRH06RB has an efficient Makita BL™ Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. It has 2-mode operation for “rotation only” or “hammering with rotation”, with 0-680 RPM, 0-4,800 BPM and .88 ft.lbs./1.2 Joules of impact energy for fast and efficient drilling. The compact size and lower weight mean reduced fatigue for operators, especially for overhead applications. Additional features include a vibration-absorbing handle that moves independently of the motor and hammer mechanism for increased operator comfort, as well as a variable speed trigger, built-in L.E.D. lights, and one-touch sliding chuck for easy bit changes.
It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT® batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
-
Quick View
Makita 7″ Compact Jobsite Fan, 18V LXT
The Makita 18V max LXT® Lithium-Ion Cordless 7-1/8” Fan is a portable and convenient air-moving solution for painters, contractors, and more.
The fan has three speed settings and an oscillation selector for optimal air velocity and control. Added features include tilt-settings for better direction of air flow, and an adjustable hook for easy handling and hanging. The 3-stage automatic timer has 1-hour, 2-hour and 4-hour power-off selection. -
Quick ViewMakita 4-3/4″ Portable Band Saw
The Makita Portable Band Saw model 2107FZ is a compact and versatile solution for metal cutting including pipe, Unistrut®, all-thread, angle-iron, and more.
The 2107FZ is powered by a 6.5 AMP motor and delivers 200-350 ft./min., with a variable speed control dial that allows the user to match the speed to the application. Additional features include a blade tightening lever for fast and easy blade installation, dual ball bearing guides for precision cutting, and a built-in high-output fluorescent light to illuminate the cutting area. It’s engineered with a no lock-on feature, so the saw turns off when the switch is released.
-
Quick View
Makita 5″ Random Orbit Sander, Variable Speed
Makita’s 5-Inch Random Orbit Sander with variable speed combines power, speed and performance with improved grip and control, including an innovative adjustable front handle. The large 1/8-inch random orbit action delivers fast and smooth sanding and a swirl-free finish, with a pad control system for controlled pad speed upon start-up. The rubberized palm grip and top handle fit like a glove with even pressure and easy control. It is ideal for woodworkers, finish carpenters and general contractors.
-
Quick View
Makita Multi‑Tool Kit
-
Quick View
Makita 1/2″ Angle Drill w/Cord
Tackle hard-to-reach plumbing work with the Makita 1/2 in. Right Angle Drill (model DA4031). The drill can handle steel up to 1/2 in. thick and wood up to 4-5/8 in. at difficult angles with its Sidewinder handle that rotates 90 degrees left or right. The powerful 10 Amp motor offers precise variable speed control across 2 ranges, 0 – 1,200 RPM and 0 – 300 RPM. Additional features include an adjustable top handle and an ergonomic rubberized grip.
-
Quick View
Makita Subcompact Impact /Hammer Drill Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX202RB is a combo kit with two 18V Sub-Compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless hammer driver-drill with two speed settings that weighs only 2.8 lbs. The percussive hammer-drill setting allows for drilling into masonry and brick. The variable speed brushless impact driver has two speed settings and weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries,which feature an integrated L.E.D. battery charge level indicator.
-
Quick View
Makita 3-1/2″ Stick Framing Nailer
The 21º Full Round Head 3-1/2″ Framing Nailer combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing/siding, and sub-flooring. It is ideal for framers, roofers and carpenters.
-
Quick View
Makita 1-3/4″ Coil Roofing Nailer
The Makita 1-3/4″ Roofing Coil Nailer combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter coil roofing nails, from 3/4” to 1-3/4” in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister.
Ease-of-use features include a “tool-less” depth adjustment, engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool. -
Quick View
Makita 2″ Brad Nailer 18 Gauge
Makita’s 2-inch Brad Nailer features a durable and compact design with ease-of-use features including a narrow-nose design that make it ideal for a wide variety of finish applications.
The AF505N can operate from 60 to 115 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch. The magazine capacity is up to 100 nails, with a quick release cam-lock to open the nail guide assembly to easily clear jams. -
Quick View
Makita Subcompact 11/16″ SDS‑PLUS Rotary Hammer Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V run time and compatibility with the world’s largest 18V cordless tool system. The 18V LXT® Sub-Compact Brushless 11/16” Rotary Hammer (accepts SDS-PLUS bits) is ideal for working in tight spaces and for overhead conditions.
The XRH06RB has an efficient Makita BL™ Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. It has 2-mode operation for “rotation only” or “hammering with rotation”, with 0-680 RPM, 0-4,800 BPM and .88 ft.lbs./1.2 Joules of impact energy for fast and efficient drilling. The compact size and lower weight mean reduced fatigue for operators, especially for overhead applications. Additional features include a vibration-absorbing handle that moves independently of the motor and hammer mechanism for increased operator comfort, as well as a variable speed trigger, built-in L.E.D. lights, and one-touch sliding chuck for easy bit changes.
It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT® batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
-
Quick View
Makita 7″ Compact Jobsite Fan, 18V LXT
The Makita 18V max LXT® Lithium-Ion Cordless 7-1/8” Fan is a portable and convenient air-moving solution for painters, contractors, and more.
The fan has three speed settings and an oscillation selector for optimal air velocity and control. Added features include tilt-settings for better direction of air flow, and an adjustable hook for easy handling and hanging. The 3-stage automatic timer has 1-hour, 2-hour and 4-hour power-off selection. -
Quick View
Makita 4-3/4″ Portable Band Saw
The Makita Portable Band Saw model 2107FZ is a compact and versatile solution for metal cutting including pipe, Unistrut®, all-thread, angle-iron, and more.
The 2107FZ is powered by a 6.5 AMP motor and delivers 200-350 ft./min., with a variable speed control dial that allows the user to match the speed to the application. Additional features include a blade tightening lever for fast and easy blade installation, dual ball bearing guides for precision cutting, and a built-in high-output fluorescent light to illuminate the cutting area. It’s engineered with a no lock-on feature, so the saw turns off when the switch is released.
-
Quick View
Makita 5″ Random Orbit Sander, Variable Speed
Makita’s 5-Inch Random Orbit Sander with variable speed combines power, speed and performance with improved grip and control, including an innovative adjustable front handle. The large 1/8-inch random orbit action delivers fast and smooth sanding and a swirl-free finish, with a pad control system for controlled pad speed upon start-up. The rubberized palm grip and top handle fit like a glove with even pressure and easy control. It is ideal for woodworkers, finish carpenters and general contractors.
-
Quick View
Makita Multi‑Tool Kit
-
Quick View
Makita 1/2″ Angle Drill w/Cord
Tackle hard-to-reach plumbing work with the Makita 1/2 in. Right Angle Drill (model DA4031). The drill can handle steel up to 1/2 in. thick and wood up to 4-5/8 in. at difficult angles with its Sidewinder handle that rotates 90 degrees left or right. The powerful 10 Amp motor offers precise variable speed control across 2 ranges, 0 – 1,200 RPM and 0 – 300 RPM. Additional features include an adjustable top handle and an ergonomic rubberized grip.
-
Quick View
Makita Subcompact Impact /Hammer Drill Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX202RB is a combo kit with two 18V Sub-Compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless hammer driver-drill with two speed settings that weighs only 2.8 lbs. The percussive hammer-drill setting allows for drilling into masonry and brick. The variable speed brushless impact driver has two speed settings and weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries,which feature an integrated L.E.D. battery charge level indicator.
