Ground Rod Driver
As the name implies, Ground Rod Drivers are used to drive grounding rods into the earth. Using a rotary hammer with either the SDS-Max shank or the Spline shank, is far easier than driving the rods by manual effort.
- Additional information
- Description
Additional information
| Size | 3/4″ SDS-Max, 3/4″ Spline |
|---|
As the name implies, Ground Rod Drivers are used to drive grounding rods into the earth. Using a rotary hammer with either the SDS-Max shank or the Spline shank, is far easier than driving the rods by manual effort.
Related Products
-
Quick ViewMakita 7/8″ SDS+ Rotary Hammer Drill, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless 7/8” SDS-Plus Rotary Hammer (XRH04Z) delivers faster, more efficient percussive drilling to the jobsite. The versatile XRH04Z has 3-mode operation and a built-in torque limiter to ensure stable torque control for a range of concrete drilling tasks, with a more compact design and less vibration.
The XRH04Z features a Makita-built high torque motor that delivers 0-1,200 RPM, 0-4,000 blows per minute (BPM), and 1.4 ft.lbs. of impact energy for a wide range of concrete drilling applications. The 3-mode switch allows for hammering, rotation, or hammering with rotation. It also delivers two-times faster drilling with synchronized RPM and BPM for more efficient drilling. The built-in torque limiter clutch disengages if the bit jams, and ensures more stable torque control.
-
Quick View
Makita 1″ SDS+ Rotary Hammer HEPA Kit, 18V LXT
The 18V LXT® Lithium-Ion Brushless 1” Rotary Hammer with HEPA Dust Extractor Attachment (model XRH011TX) combines Makita BL™ Brushless Motor Technology with concrete dust extraction – without the cord. The XRH011TX was the industry's first 1″ capacity rotary hammer in the 18V category, and sets new standards in the cordless tool category. XRH011TX is an OSHA Table 1 compliant concrete drilling solution when used in conjunction with Filter Cleaning Mechanism Dust Case (part #199588-6).
-
Read MoreQuick View
Makita XGT 40V 1-3/16″ SDS+ Rotary Hammer
The Makita 40V max XGT® Brushless Cordless 1-3/16″ AVT® Rotary Hammer accepts SDS-PLUS bits, AFT®, AWS® Capable (model GRH08) is a cordless concrete solution designed for heavy-load applications. It is available as the bare tool, as a kit with battery and charger, and with an attached Dust Extractor as well. It delivers the power, speed, and run-time for corded demands, without the cord.
The GRH08 is powered by a 40V max battery with a Makita-built brushless motor that combine to deliver the power and performance required for heavy-load applications. It can deliver up to 135 of 3/8″ holes using a fully charged 40V XGT® 4.0Ah battery*. The variable speed dial and trigger enables the user to match the speed to the application.
XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
There are 4 feature models of the GRH08 Rotary Hammer. The choices are with or without a battery and rapid charger, and with or without the Dust Extractor with HEPA filter. All models come with standard accessories of side handle, grease, and towel. Options for the Makita GRH08 are:
- GRH08Z: Tool only, with accessories
- GRH08ZW: Tool, Dust Extractor, accessories
- GRH08M1: Tool, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, charger, tool bag, accessories
- GRH08M1W: Tool, Dust Extractor, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, charger, tool bag, accessories
-
Quick View
Makita 1-9/16″ Spline Rotary Hammer w/Cord
The Makita HR4041C 1-9/16 in. Spline-Shank Rotary Hammer Drill features a powerful 11 Amp motor engineered with field-core interlocking steel laminations, a dual ball-bearing armature and a large-surface commutator for an efficient transfer of power. It delivers up to 230 – 460 RPM and 1,300 – 2,600 BPM and has 2 modes for hammering only and hammering with rotation. Soft-start functionality facilitates control and improved accuracy, while sequential impact timing promotes faster work.
-
Read MoreQuick View
Makita XGT 40V 1-⅛” Rotary Hammer, SDS-PLUS Interchangeable Chuck
The Makita 40V max XGT® 1-1/8” AVT® Rotary Hammer with interchangeable chuck (GRH02) is a cordless concrete solution designed for heavy-load applications. The quick-change chuck allows the user to switch from SDS-PLUS bits to ½” keyless chuck to utilize straight shank bits. It delivers the power, speed, and run-time for corded demands, without the cord. XGT technology delivers up to 135 of 3/8” holes per charge when using one 40V max XGT 4.0Ah Battery. The Makita-built brushless motor delivers a full 2.8 ft. lbs. of impact energy, with 0-980 RPM and 0-5,000 BPM. Constant speed control automatically applies additional power under load for optimum performance.
XGT is a system of equipment, tools, batteries and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
There are 2 feature models of the GRH02 Rotary Hammer. The choice is with or without one battery and rapid charger. Both models come with standard accessories of side handle, grease, and towel. Options for the Makita GRH02 are:
- GRH02Z: Tool only, with accessories
- GRH02M1: Tool, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, rapid charger, tool bag, and accessories
-
Read MoreQuick View
Bull Point Chisels
Bull point chisels, powered by rotary hammers, are great at demolition. Their point makes short work of any object that needs to be demolished.
-
Quick View
Makita 1″ SDS+ Rotary Hammer w/D-Handle, Corded
Makita’s versatile HR2475 1-inch SDS-PLUS Rotary Hammer delivers more efficient hitting in a compact size for faster, more productive work. The HR2475 is powered by a 7 AMP motor that delivers a no load speed of 0-1,100 RPM, with 0-4,500 BPM and 2.7 Joules of impact energy. Three-mode operation includes “Rotation Only,” “Hammering with Rotation” and “Hammering Only” for multiple applications. The HR2475 is a versatile and hard-hitting rotary hammer for masons, remodelers, electricians, maintenance crews, and general contractors seeking a best-in-class 1” rotary hammer.
-
Quick View
Makita Dust Extraction Attachment, SDS+
The Makita Dustless Hammer Attachment (193472-7) works with Makita SDS-Plus corded and cordless rotary hammers. It features a 17 in. hose, telescoping spring-loaded barrel, depth stop, bit size adjustment knobs and a built-in ruler. No vacuum motor or components attach to the tool. The Makita solution is more compact and has less weight than most built-on systems. Engineered for improved dust collection when used with a jobsite vacuum.
-
Read MoreQuick View
Chisels, Flat & Scaling
Powered by rotary hammers, flat chisels and scaling chisels clean surfaces very easily. Flat chisels are up to 1″ wide and 48″ in length, while scaling chisels are from 1-1/2″ to 4-1/2″ wide, and only up to 18″ in length.
The shaft of the chisels can be Spline, SDS-Max, or Hex style. -
Quick View
Makita 11/16″ SDS+ AVT Rotary Hammer, 18V LXT
18V LXT® Brushless Cordless 11/16″ AVT® Rotary Hammer (XRH12Z) is a cordless concrete solution that accepts SDS-PLUS bits, and features AWS™ capability for maximum efficiency and convenient dust extraction. The efficient HEPA filter captures 99.97% of particulates .3 microns and larger. The compatible On-Board Dust Extractor Attachment with HEPA Filter is OSHA Table 1 compliant. It’s powered by 18V LXT® technology and an efficient brushless motor for maximum power, speed and run-time for corded demands, without the cord.
