Bull Point Chisels
Bull point chisels, powered by rotary hammers, are great at demolition. Their point makes short work of any object that needs to be demolished.
- Additional information
- Description
- Data Sheets & Downloads
Additional information
| Size | 12″ Spline, 12″ Hex SK, 12″ SDS-Max, 12″ SDS-Plus, 18″ Spline, 18″ Hex SK |
|---|
Bull point chisels, powered by rotary hammers, are great at demolition. Their point makes short work of any object that needs to be demolished.
Safety Data Sheet
for Dust of Tungsten, Cobalt, Chromium, & Tantalum
Related Products
-
Read MoreQuick ViewChisels, Flat & Scaling
Powered by rotary hammers, flat chisels and scaling chisels clean surfaces very easily. Flat chisels are up to 1″ wide and 48″ in length, while scaling chisels are from 1-1/2″ to 4-1/2″ wide, and only up to 18″ in length.
The shaft of the chisels can be Spline, SDS-Max, or Hex style. -
Quick ViewMAKITA 1-1/8″ SDS+ ROTARY HAMMER W/CORD
The 1-3/16” Rotary Hammer (HR3001CK) is engineered for performance and power. It has a 7.5 AMP motor that delivers 2.6 ft.lbs. of impact energy to handle the most demanding applications.
The 3-mode operation offers “rotation only”, “hammering with rotation” or “hammering only” for multiple applications. Modes can be easily changed with a recessed hammer-function selector, which is located below the gear housing for improved durability.
The L-shaped body design brings the operator closer to the application for increased accuracy. A vibration-absorbing back handle and rubberized soft grip provides increased operator comfort.
-
Read MoreQuick View
Makita XGT 40V 1-9/16” Rotary Hammer, SDS-MAX
The Makita 40V max XGT® 1-9/16” AVT® Rotary Hammer (GRH05) is a cordless concrete solution designed for heavy-load applications. It accepts SDS-MAX bits, and it delivers the power, speed, and run-time for corded demands, without the cord. Constant speed control automatically applies additional power under load for optimum performance.
The GRH05 features Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if rotation of bit is suddenly forced to stop, and Anti-Vibration Technology (AVT®), which is an internal counterbalance that moves counterweight pistons in the opposite direction of the drive piston to actively reduce vibration.
XGT is a system of equipment, tools, batteries and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
There are 2 feature models of the GRH05 Rotary Hammer. The choice is with or without one battery and rapid charger. Both models come with standard accessories of side handle, grease, and towel. Options for the Makita GRH05 are:
- GRH05Z: Tool only, with accessories
- GRH05M1: Tool, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, rapid charger, tool case, and accessories
-
Quick View
Mortar Chisel
Mortar Chisels are used to dress seams between tiles or masonry pieces, especially to remove old mortar.
-
Quick View
Makita Dust Extraction Kit
The Makita Dust Extraction Attachment (196537-4) is engineered to reduce the dust created from concrete drilling when used with a jobsite vacuum. The Dust Extraction Attachment fits the Makita 1-9/16″ AVT® Rotary Hammer model HR4013C.
The 196537-4 includes both drilling and demolition boots for greater versatility and multiple applications. The Dust Extraction Attachment is part of Makita’s expanding line-up of dust extraction solutions, including the VC4710 Jobsite Vacuum. -
Read MoreQuick View
Ground Rod Driver
As the name implies, Ground Rod Drivers are used to drive grounding rods into the earth. Using a rotary hammer with either the SDS-Max shank or the Spline shank, is far easier than driving the rods by manual effort.
-
Quick View
Makita 1-9/16″ SDS MAX Rotary Hammer Kit, 18V X2 LXT
The Makita 18V X2 LXT® (36V) Brushless 1-9/16” Advanced AVT® Rotary Hammer with AWS is a cordless concrete solution that’s loaded with advanced engineering for maximum efficiency. It’s equipped with Auto-Start Wireless System (AWS) for wireless connectivity with an AWS-equipped dust extractor (sold separately), and features Advanced AVT® for reduced vibration.
It’s powered by two 18V LXT® batteries and an efficient brushless motor for maximum power, speed and run-time for corded demands, without the cord. It is ideal for a range of trades including masons, concrete contractors, demolition contractors, plumbers, electricians, sprinkler installers, and general contractors seeking a best-in-class rotary hammer. -
Quick View
Makita 1″ SDS+ Rotary Hammer w/D-Handle
The Makita 1” AVT® Rotary Hammer (model HR2641, with D-Handle) is engineered with Anti-Vibration Technology (AVT®), an internal counterbalance system for significantly less vibration. The HR2641 combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling.
The HR2641 is engineered for a range of applications including overhead drilling into concrete, wood and metal, removing tile, and more. It is ideal for a range of trades including masons, plumbers, electricians, sprinkler installers, city maintenance crews, and general contractors seeking a best-in-class 1” rotary hammer. -
Quick View
Makita 1-9/16″ Spline Rotary Hammer w/Cord
The Makita HR4041C 1-9/16 in. Spline-Shank Rotary Hammer Drill features a powerful 11 Amp motor engineered with field-core interlocking steel laminations, a dual ball-bearing armature and a large-surface commutator for an efficient transfer of power. It delivers up to 230 – 460 RPM and 1,300 – 2,600 BPM and has 2 modes for hammering only and hammering with rotation. Soft-start functionality facilitates control and improved accuracy, while sequential impact timing promotes faster work.
-
Quick View
Makita 7/8″ SDS+ Rotary Hammer Drill, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless 7/8” SDS-Plus Rotary Hammer (XRH04Z) delivers faster, more efficient percussive drilling to the jobsite. The versatile XRH04Z has 3-mode operation and a built-in torque limiter to ensure stable torque control for a range of concrete drilling tasks, with a more compact design and less vibration.
The XRH04Z features a Makita-built high torque motor that delivers 0-1,200 RPM, 0-4,000 blows per minute (BPM), and 1.4 ft.lbs. of impact energy for a wide range of concrete drilling applications. The 3-mode switch allows for hammering, rotation, or hammering with rotation. It also delivers two-times faster drilling with synchronized RPM and BPM for more efficient drilling. The built-in torque limiter clutch disengages if the bit jams, and ensures more stable torque control.
