Ground Rod Driver
As the name implies, Ground Rod Drivers are used to drive grounding rods into the earth. Using a rotary hammer with either the SDS-Max shank or the Spline shank, is far easier than driving the rods by manual effort.
- Additional information
- Description
Additional information
| Size | 3/4″ SDS-Max, 3/4″ Spline |
|---|
As the name implies, Ground Rod Drivers are used to drive grounding rods into the earth. Using a rotary hammer with either the SDS-Max shank or the Spline shank, is far easier than driving the rods by manual effort.
Related Products
-
Quick ViewMakita Subcompact 11/16″ SDS+ Rotary Hammer Drill, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V run time and compatibility with the world’s largest 18V cordless tool system. The 18V LXT® Sub-Compact Brushless 11/16” Rotary Hammer (XRH06ZB) accepts SDS-PLUS bits, and is ideal for working in tight spaces and for overhead conditions.
The XRH06ZB has an efficient Makita BL™ Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. It has 2-mode operation for “rotation only” or “hammering with rotation”, with 0-680 RPM, 0-4,800 BPM and .88 ft.lbs. of impact energy for fast and efficient drilling. The compact size and lower weight mean reduced fatigue for operators, especially for overhead applications.
-
Quick ViewMakita 1″ SDS+ Rotary Hammer HEPA Kit, 18V LXT
The 18V LXT® Lithium-Ion Brushless 1” Rotary Hammer with HEPA Dust Extractor Attachment (model XRH011TX) combines Makita BL™ Brushless Motor Technology with concrete dust extraction – without the cord. The XRH011TX was the industry's first 1″ capacity rotary hammer in the 18V category, and sets new standards in the cordless tool category. XRH011TX is an OSHA Table 1 compliant concrete drilling solution when used in conjunction with Filter Cleaning Mechanism Dust Case (part #199588-6).
-
Quick ViewBushing Chisel
The Bushing Chisel is used to finish a stone or concrete surface, smoothing irregularities by pounding them to dust. Literally.
-
Quick ViewMakita 1″ SDS-PLUS Rotary Hammer, 7AMP, AVT®
The Makita 1” AVT® Rotary Hammer (model HR2611F, with Pistol-Grip) is engineered with Anti-Vibration Technology (AVT®), an internal counterbalance system for significantly less vibration. The HR2611F combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling.
-
Quick ViewMakita Dust Extraction Kit
The Makita Dust Extraction Attachment (196537-4) is engineered to reduce the dust created from concrete drilling when used with a jobsite vacuum. The Dust Extraction Attachment fits the Makita 1-9/16″ AVT® Rotary Hammer model HR4013C.
The 196537-4 includes both drilling and demolition boots for greater versatility and multiple applications. The Dust Extraction Attachment is part of Makita’s expanding line-up of dust extraction solutions, including the VC4710 Jobsite Vacuum. -
Quick ViewMakita 7/8″ SDS+ Rotary Hammer Drill, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless 7/8” SDS-Plus Rotary Hammer (XRH04Z) delivers faster, more efficient percussive drilling to the jobsite. The versatile XRH04Z has 3-mode operation and a built-in torque limiter to ensure stable torque control for a range of concrete drilling tasks, with a more compact design and less vibration.
The XRH04Z features a Makita-built high torque motor that delivers 0-1,200 RPM, 0-4,000 blows per minute (BPM), and 1.4 ft.lbs. of impact energy for a wide range of concrete drilling applications. The 3-mode switch allows for hammering, rotation, or hammering with rotation. It also delivers two-times faster drilling with synchronized RPM and BPM for more efficient drilling. The built-in torque limiter clutch disengages if the bit jams, and ensures more stable torque control.
-
Read MoreQuick ViewMakita XGT 40V 1-3/16″ SDS+ Rotary Hammer
The Makita 40V max XGT® Brushless Cordless 1-3/16″ AVT® Rotary Hammer accepts SDS-PLUS bits, AFT®, AWS® Capable (model GRH08) is a cordless concrete solution designed for heavy-load applications. It is available as the bare tool, as a kit with battery and charger, and with an attached Dust Extractor as well. It delivers the power, speed, and run-time for corded demands, without the cord.
The GRH08 is powered by a 40V max battery with a Makita-built brushless motor that combine to deliver the power and performance required for heavy-load applications. It can deliver up to 135 of 3/8″ holes using a fully charged 40V XGT® 4.0Ah battery*. The variable speed dial and trigger enables the user to match the speed to the application.
XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
There are 4 feature models of the GRH08 Rotary Hammer. The choices are with or without a battery and rapid charger, and with or without the Dust Extractor with HEPA filter. All models come with standard accessories of side handle, grease, and towel. Options for the Makita GRH08 are:
- GRH08Z: Tool only, with accessories
- GRH08ZW: Tool, Dust Extractor, accessories
- GRH08M1: Tool, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, charger, tool bag, accessories
- GRH08M1W: Tool, Dust Extractor, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, charger, tool bag, accessories
-
Quick ViewMakita 1-1/8″ SDS+ Rotary Hammer w/Cord
Model HR2811F is a versatile, high-powered rotary hammer with an L-shape design ideal for horizontal work. The hammer accepts SDS-PLUS bits, and is powered by a 6.7 AMP variable speed motor delivering 2.7 Joules of impact energy. The HR2811F features 3-mode operation for “rotation only”, “hammering with rotation”, or “hammering only” for multiple applications, with 0-1,100 RPM and 0-4,500 BPM. The torque limiting clutch prevents gear damage by automatically disengaging gears if the bit binds. The HR2475 has an LED light for improved illumination of the work surface.
-
Quick ViewMakita 1-9/16″ SDS Max AVT Rotary Hammer w/Cord
The 1-9/16” AVT® Rotary Hammer (model HR4013C) has 45% less vibration and 20% more impact energy than the previous model. It is engineered with enhanced Anti-Vibration Technology (AVT®), a synchronized three-component system for significantly less vibration. The result of the enhanced AVT® is a category-leading vibration rating of 5m/s².
The powerful 11 AMP motor delivers 8.4 ft. lbs. (11.4 Joules) of impact energy, 20% more than the previous model for faster drilling. An added feature is the option of lock-on or trigger-activated in the “chipping only” mode, with a push button start/stop control for more convenient operation.
-
Quick ViewMortar Chisel
Mortar Chisels are used to dress seams between tiles or masonry pieces, especially to remove old mortar.
