Euroboor Weldon Tap Holders
The Euroboor Weldon Tap holders allow the operator to use a tap bit to thread out the hole that was just cut.
- Additional information
- Description
Additional information
| Size | 1/4″, 7/16″ |
|---|
The Euroboor Weldon Tap holders allow the operator to use a tap bit to thread out the hole that was just cut.
Related Products
-
Read MoreQuick ViewDouble End Drill Bits
With these double end drill bits, you can work twice as long without needing to carry a second bit. No worrying about losing it before it’s needed. As the first end gets worn out, simply remove the bit from the drill, turn it around, and insert the worn end in the chuck. Then get right back to work.
-
Read MoreQuick ViewRebar Cutter Adapter Shank
The rebar cutter heads require a shank adapter to mount them on. This shank comes in multiple styles, so you can find the proper one to work with your hammer driver. Whether you use SDS-Max, SDS-+,or Spline, these are ready for the job.
-
Read MoreQuick View
Granite & Marble Carbide Bits
Specially formed for cutting smoothly through granite, marble, and other hard rocks.
-
Quick View
“Silver & Deming” Drill Bits
One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.
-
Read MoreQuick View
Euroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.
-
Read MoreQuick View
Euroboor HCL 2″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 2″ with a drill depth of 2″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 2″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 2″ from penetrating the second layer of material.
-
Read MoreQuick View
Jobber Drill Bits, Fractional Sizes, Cobalt
These Cobalt Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a cobalt layer finish.
These bits are in Fractional size. American Wire Size bits are listed separately. Click the Jobbers tab below to see more. -
Read MoreQuick View
Glass & Tile Bits
These bits are made specifically to cut cleanly through glass and ceramic tile.
-
Read MoreQuick View
Jobber Drill Bits, Fractional Sizes
Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a black oxide finish.
These bits are in Fractional size. American Wire Size bits are listed separately. Click the Jobbers tab below to see more. -
Read MoreQuick View
Aircraft Drill Bits
These Aircraft length drill bits are formed from high-speed steel, with a 135° split point tip, and black oxide finish.
Select sizes are available in lengths up to 72″, for the extreme jobs.
