Buildex Trugrip Roof Screw, 1″
Buildex® TrueGrip timber screws are suitable for fixing metal roofing into both hardwood and softwood timber battens. Their sharp point prevents screw-walking when starting to insert them. They also engage the material faster, and need less effort, for a safer installation environment.
- Description
- FEATURES AND BENEFITS
- STRENGTH CHART
Buildex® TrueGrip timber screws are suitable for fixing metal roofing into both hardwood and softwood timber battens. Their sharp point prevents screw-walking when starting to insert them. They also engage the material faster, and need less effort, for a safer installation environment.
- Fast and Easy application into both Hardwood and Softwood battens
- Climaseal® 4 corrosion protection available
- Under-roof Corrosion Protection with Shankguard® feature* which prevents the scratching and scouring of the fastener shank that can happen during installation.
- Higrip® Feature grips to the roof sheeting to create a positive join preventing water entry and over drilling. It also stops the roof sheet moving down the shank when the roof is walked on.
Strength Chart and Pull-Out Chart
Installation Guidelines
Related Products
-
Read MoreQuick ViewHex Cap Screws, Grades 8
A hex cap screw is a six-sided bolt with a trimmed hex head and a washer face on the bearing surface. Informally, it is also called a Finished Hex Bolt. Hex cap screws have tighter tolerances than standard bolts of the same size, and so are often used where precise tolerances are needed. The standard hex screw specifications include ASTM A449 and SAE J429 Grade-8.
-
Read MoreQuick ViewSidewalk Bolt, Stainless Steel
Also known as shutter screws, the ultra-wide truss head distributes the load over a large area for excellent holding pressure when placing plywood, metal, and fabric hurricane panels or removable track. Made of 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic.
-
Read MoreQuick View
Square Nuts, Zinc
As the name implies, square nuts have a 4-sided, square design. This square profile provides a greater bearing surface when installing onto a bolt. Square nuts are designed for use with square headed bolts, and the large surface provides better resistance to loosening. When using square nuts, as with hex nuts, use flat washers of the correct size and material.
-
Read MoreQuick View
F436 Structural Washers (SAE)
-
Read MoreQuick View
All Thread, Threaded Rod
Threaded rod has continuous threading, either on both ends or it may extend along the complete length of the rod. It has no head or fashioned tip. Threaded rod can be used as an anchor bolt, clamp, hanger or U-bolt.
Threaded rod is available in carbon steel, as Plain, Zinc Plated and HDG, as well as Stainless Steel and the B7/A193 alloy. -
Read MoreQuick View
Machine Screws
Machine screws are meant to hold two metal work pieces together, with the use of a threaded pre-tapped hole, or through a hole and held with a nut. They are threaded the entire length of the shank. For most styles of a machine screw, the length is measured from under the head to the end of the screw. For flat head machine screws, since they are intended to fit into a countersunk hole, their length is measured from the top of the screw head to the end of the screw.
-
Read MoreQuick View
Cylindrical Head Socket Cap Screw
Socket cap screws have a small cylindrical head with tall vertical sides, and with recessed hex-shaped sockets with which to drive them. Because they are driven with hex keys (Allen wrench) or hex socket bits, they are ideal for applications where limited clearance would not allow the use of wrenches and sockets. In addition, the driving surface is protected from external damage and provides six sides of contact surface for added torque.
-
Read MoreQuick View
Dekfast Roof Screws, 10″ to 18″
Dekfast XHD High Strength Fasteners are ideal for insulation attachment to wood and light gauge steel. The SD#1 point cuts through gravel, BUR and metal up to 18ga. Black Sentri SP long=life coating provides extended corrosion protection. The #3PH pan head is compatible with all Dekfast insulation stress and membrane seam plates.
Longer sizes are available by special request.
FM and Dade County Approved. -
Read MoreQuick View
Set Screws, Cup Point
Set Screws are essentially a headless bolt, which has a hex socket in the driving end. They are commonly used when a protruding head would be in the way of other moving parts. Their most common function is to secure two parts together, but without a pre-determined positioning point between them. A prime example is fixing a pulley wheel along a drive shaft, where the set screw in the wheel’s hub is tightened into the side of the drive shaft and holds them tight due strictly to friction.
Set screws are available either as a black hard steel alloy, or as stainless steel.
Because of its headless shape, and how it bores through its hole, a set screw is also known as a “grub screw”.
-
Read MoreQuick View
F-Track Bolts
The square head of these F-Track Bolts fits perfectly into all flat and angled storm panel F-Track.
