Ankr-TITE® CCAT Cracked Concrete Wedge Anchors
The CCAT Cracked Concrete Wedge Anchors are engineered to provide superior performance in cracked concrete in both seismic and wind load conditions.
- Description
- Installation
- Tech Specs
- Part Numbers
- Downloads
- Tension & Shear
Description
The CCAT Cracked Concrete Wedge Anchors are engineered to provide superior performance in cracked concrete in both seismic and wind load conditions. The safe and reliable expansion mechanism works in both normal and extreme load conditions. A unique safety shoulder supports the clip when the anchor is under strain.
Category 1 design criteria ICC-ES Report Number ESR-2777- Bolt Size is Hole Size®
- Safe and reliable expansion mechanism works in both normal and extreme load conditions
- 360° segment contact equalizes load distribution, increasing load-carrying capacity
- Unique safety shoulder supports the clip when the anchor is under strain
- Corrosion-resistant 316 stainless steel clipincreases service life and strength
- Dog point prevents damage during installation
- 4-line marking around the length ID stamp eases post-installation inspection
- Design meets strict acceptance criteria in the 2012, 2009, 2006 and 2003 International Building Code for post-installed anchoring applications
Specifications, Listings, and Approval
Diameters: 3/8″ – 1″
Material:
- Anchor Body: C1035 carbon steel
- Anchor Body: C1035 carbon steel
- Anchor Clip: AISI Type 316 stainless steel
- Washer: ASTM F844
- Nut: ASTM A563 Grade A
clear chromate added
- ICC-ES Report Number ESR-2777 Category 1: Cracked and Uncracked Concrete
- 2012, 2009, 2006, and 2003 International Building Codes (IBC)
- 2012, 2009, 2006, and 2003 lntemational Residential Code (IRC)
- 1999 Standard Building Code (SBC)
- 1997 Uniform Building Code (UBC)
- 2007 Florida Building Code (BC & RC)
- Miami-Dade NOA: #09-0319.05 HVHZ
- COLA RR 24939
Installation Instructions
-
- Drill the hole, at a diameter equal to the anchor diameter, perpendicular to the work surface. To assure full holding power, do not ream the hole or allow the drill to wobble.
- Drill the hole deeper than the intended embedment, but not closer than two diameters to the bottom (opposite) surface of the concrete.
- A clean hole is necessary for proper performance. Clean the hole using a nylon brush and compressed air.
- Assemble the nut and washer so that the top of the anchor extends above the nut slightly. Install the anchor through the material to be fastened.
- Installing the Ankr-TITE CCAT anchors with a torque wrench is recommended for optimum performance. Refer to torque recommendations on this page.
NOTE: Always wear safety glasses. Follow drill manufacturer's instructions. Use only solid carbide-tipped drill bits meeting ANSI B212.15 diameter standards.
Installation Data Tables
Information provided only for the use of a qualified design engineer. Use of technical data by persons not qualified could cause serious damage, injury or even death.
Ultimate values shown. For static loads, use one-fourth of the maximum tensile and shear capacities for the recommended 4:1 safety factor.
|
Catalog No. |
Anchor Size |
Thread Length |
Quantity |
|---|
|
CCAT3830 |
3/8 x 3 |
1-3/4 |
50/400 |
|
CCAT3833 |
3/8 x 3-3/4 |
2-1/2 |
50/400 |
|
CCAT3850 |
3/8 x 5 |
3-1/4 |
50/400 |
|
CCAT3870 |
3/8 x 7 |
4-1/2 |
50/300 |
|
CCAT1223 |
1/2 x 2-3/4 |
1-1/8 |
25/200 |
|
CCAT1233 |
1/2 x 3-3/4 |
2-1/8 |
25/200 |
|
CCAT1241 |
1/2 x 4-1/4 |
2-5/8 |
25/200 |
|
CCAT1252 |
1/2 x 5-1/2 |
3-3/4 |
25/150 |
|
CCAT1270 |
1/2 x 7 |
4-1/2 |
25/150 |
|
CCAT1282 |
1/2 x 8-1/2 |
5 |
10/40 |
|
CCAT1210 |
1/2 x 10 |
5 |
10/40 |
|
CCAT5832 |
5/8 x 3-1/2 |
1-1/2 |
10/80 |
|
CCAT5841 |
5/8 x 4-1/4 |
2-3/8 |
10/80 |
|
CCAT5850 |
5/8 x 5 |
3-1/8 |
10/80 |
|
CCAT5860 |
5/8 x 6 |
4 |
10/80 |
|
CCAT5870 |
5/8 x 7 |
4-1/2 |
10/80 |
|
CCAT5882 |
5/8 x 8-1/2 |
5 |
10/40 |
|
CCAT5810 |
5/8 x 10 |
5 |
10/40 |
|
CCAT3443 |
3/4 x 4-3/4 |
2-1/4 |
10/80 |
|
CCAT3452 |
3/4 x 5-1/2 |
3-1/4 |
10/60 |
|
CCAT3461 |
3/4 x 6-1/4 |
3-3/4 |
10/60 |
|
CCAT3470 |
3/4 x 7 |
4-3/4 |
10/60 |
|
CCAT3482 |
3/4 x 8-1/2 |
5 |
10/40 |
|
CCAT3410 |
3/4 x 10 |
5 |
10/40 |
|
CCAT3412 |
3/4 x 12 |
5 |
5/20 |
|
CCAT1060 |
1 x 6 |
3 |
5/20 |
|
CCAT1090 |
1 x 9 |
5 |
5/20 |
|
CCAT1012 |
1 x 12 |
5 |
5/20 |
View Technical Manual: Wej-It Fastening Systems Teh Manual
View Specific Catalog Info: Wej-It Catalog
View ICC-ES ESR 2777: ICC Evaluation Service
Los Angeles: City of Los Angeles Certification
Related Products
-
Hot
Quick ViewHex Head Cap Screws – Grade 5
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 5 is the most common grade used in manufacturing assembly. Zinc plating, retards the corrosion rate in a normal atmosphere. Tensile Strength: 120,000 psi minimum. -
Read MoreQuick View
Sidewalk Bolt, Stainless Steel
Also known as shutter screws, the ultra-wide truss head distributes the load over a large area for excellent holding pressure when placing plywood, metal, and fabric hurricane panels or removable track. Made of 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic.
-
Read MoreQuick View
E-Z Anchor Drywall Anchors
The E-Z Ancor is a one-piece self-drilling anchor designed for optimal holding performance in drywall. Because it pre-drills its own small precise hole, no hole preparation is necessary.
With a range of choices, including mini, regular and heavy duty, and available in zinc or nylon, there is an E-Z solution to your hanging problems. -
Quick View
1″ Conduit Clip w/Pin
Designed for use with Powder Actuated tools, this EMT clip will secure conduit to concrete, without the need to drill a hole first.
-
Wej-It Ultra-Drop™ Drop-In Anchors
The Ultra-Drop Drop In Anchor that requires relatively shallow embedment. It also eliminates the requirement for rod couplings in overhead applications.
The setting tool is used to expand the Drop-In anchors after they are placed in the drilled hole.
-
HotQuick View
Hex Head Cap Screws – Grade 8
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 8 has a greater tensile strength than Grade 5. Designed for use in high-strength and high-stress applications. -
HotQuick View
Original Wej-It® Wedge Anchors
The Wej-It original Wedge Anchors are time tested with proven reliabilty and has been an industry standard for over 60 years.
-
Read MoreQuick View
Hollow Wall Anchor, Long and Short
The sleeve type hollow wall anchor is designed for use in base materials such as plaster, wallboard, concrete block, hollow tile or plywood. It is installed using a drill and can be used with various wall thicknesses. The sections of the sleeve expand as the screw is tightened and driven into the wall. The front section of the hollow wall anchor will add permanent screw threads, so that once set, the screw may be removed as often as necessary without affecting the anchor.
These anchors are also known as Molly bolts. -
Read MoreQuick View
POWER-Skru Bolt Anchors
The POWER-Skru Bolt Anchor is a high-strength screw anchorwith self-taping threads that offer a unique undercutting design for anchoring into concrete and masonry. No secondary setting is needed. The POWER-Skru Bolt Anchor provides high-strength performance with low installation torque. A heavy-duty mechanically-galvanized finish is available to enhance corrosion resistance.
Can be used with almost any material, including:
- Racking
- Railing Sill
- Stadium Seating
- Tilt up Braces
- Formwork
- Anchoring Equipment
-
Quick View
Ramset T3 Fuel Cell, 2-Pack
All fuel cells replace conventional powder loads and drive more than 1000 shots.
