Ankr-TITE Wej-It Anchors

Hot

Ankr-TITE Wej-It Anchors

This anchor is a high-strength, fully threaded, and torque-controlled expansion anchor designed for anchoring into normal-weight concrete, lightweight concrete, and grouted concrete masonry.

Add to Project List

Add to quote

Description

This anchor is a high-strength, fully threaded, and torque-controlled expansion anchor designed for anchoring into normal-weight concrete, lightweight concrete, and grouted concrete masonry. The Ankr-TITE anchor has a unique machine lathed expansion cone that supports a thick three dimple clip engineered to provide high load carrying capability and reduce slip in a variety of installation conditions. Full product line available in all materials.

ankr_tite_wedge_linedrawing-04 Key Features and Benefits

Bolt Size is Hole Size^®

Available in four combinations:
1. Zinc plated carbon steel with steel clip
2. Hot-dip galvanized carbon steel with 304 stainless steel clip
3. All 304 stainless steel
4. All 316 stainless steel
Sets up fast
– Needs less rotation to achieve required torque
Unique “safety shoulder”
– Supports clip when anchor is under strain
– Minimizes bolt-end collapse and/or clip slippage under ultimate loading conditions
Enlarged dimples on clip
– Reduce slip
– Increase response in lighter concrete
360° segment contact on clip equalizes load distribution
– Increases load-carrying capacity
– More adaptable to/”forgiving” in different installation conditions

Installation Instructions

Drill the hole, whose diameter equals the anchor diameter, perpendicular to the work surface. To assure full holding power, do not ream the hole or allow the drill to wobble.
Drill the hole deeper than the intended embedment, but not closer than two diameters to the opposite surface of the concrete.
A clean hole is necessary for proper performance. Clean the hole using a nylon brush and compressed air.
Assemble the nut and washer so that the top of the nut is flush with the top of the anchor. Drive the anchor through the material to be fastened so that the nut and washer are flush with the surface of the material.
Tighten the nut, or head, 3 to 5 turns past the hand tight position. Installing the "Ankr-TITE^® Series" of anchors with a torque wrench is recommended for optimum performance. Refer to adjacent chart.*

NOTE: Always wear safety glasses. Follow drill manufacturer's instructions. Use only solid carbide-tipped drill bits meeting ANSI B212.15 diameter standards.

Can be used with almost any material, including:

Normal Weight Concrete
Lightweight Concrete
Solid Masonry

*Check with the "Specific Catalog Info" for more information

ankrwedge_ts1

ankrwedge_ts2

Zinc Plated Steel	Hot Dip	Type 304	Type 316	Anchor Size (in.)	Min. Embed (in.)	Thread Length (in.)	Quantity (Box/Carton)
AT1413	ATG1413	ATS1413	ATSS1413	1/4 x 1-3/4	1-1/4	3/4	100/800
AT1421	ATG1421	ATS1421	ATSS1421	1/4 x 2-1/4	1-1/4	1-1/4	100/800
AT1431	ATG1431	ATS1431	ATSS1431	1/4 x 3-1/4	1-1/4	2-1/4	100/800
AT3821	ATG3821	ATS3821	ATSS3821	3/8 x 2-1/4	1-3/4	1	50/400
AT3823	ATG3823	ATS3823	ATSS3823	3/8 x 2-3/4	1-3/4	1-1/2	50/400
AT3830	ATG3830	ATS3830	ATSS3830	3/8 x 3	1-3/4	1-3/4	50/400
AT3833	ATG3833	ATS3833	ATSS3833	3/8 x 3-3/4	1-3/4	2-1/2	50/400
AT3850	ATG3850	ATS3850	ATSS3850	3/8 x 5	1-3/4	3-1/4	50/400
AT3870	ATG3870	ATS3870	ATSS3870	3/8 x 7	1-3/4	4-1/2	50/300
AT1223	ATG1223	ATS1223	ATSS1223	1/2 x 2-3/4	2-1/8	1-1/8	25/200
AT1233	ATG1233	ATS1233	ATSS1233	1/2 x 3-3/4	2-1/8	2-1/8	25/200
AT1241	ATG1241	ATS1241	ATSS1241	1/2 x 4-1/4	2-1/8	2-5/8	25/200
AT1242	ATG1242*	ATS1242	ATSS1242*	1/2 x 4-1/2	2-1/8	2-5/8	25/200
AT1252	ATG1252	ATS1252	ATSS1252	1/2 x 5-1/2	2-1/8	3-3/4	25/150
AT1270	ATG1270	ATS1270	ATSS1270	1/2 x 7	2-1/8	4-1/2	25/150
AT1282	ATG1282	ATS1282	ATSS1282	1/2 x 8-1/2	2-1/8	5	10/40
AT1210	ATG1210	ATS1210	ATSS1210	1/2 x 10	2-1/8	5	10/40
AT5832	ATG5832	ATS5832	ATSS5832	5/8 x 3-1/2	2-5/8	1-1/2	10/80
AT5841	ATG5841	ATS5841	ATSS5841	5/8 x 4-1/4	2-5/8	2-3/8	10/80
AT5842*	ATG5842	ATS5842*	ATSS5842*	5/8 x 4-1/2	2-5/8	2-5/8	10/80
AT5850	ATG5850	ATS5850	ATSS5850	5/8 x 5	2-5/8	3-1/8	10/80
AT5860	ATG5860	ATS5860	ATSS5860	5/8 x 6	2-5/8	4	10/80
AT5870	ATG5870	ATS5870	ATSS5870	5/8 x 7	2-5/8	4-1/2	10/80
AT5882	ATG5882	ATS5882	ATSS5882	5/8 x 8-1/2	2-5/8	5	10/40
AT5810	ATG5810	ATS5810	ATSS5810	5/8 x 10	2-5/8	5	10/40
AT5812	ATG5812	ATS5812*	ATSS5812*	5/8 x 12	2-5/8	5	10/40
AT3441	ATG3441	ATS3441	ATSS3441	3/4 x 4-1/4	3-1/4	2	10/80
AT3443	ATG3443	ATS3443	ATSS3443	3/4 x 4-3/4	3-1/4	2-1/2	10/80
AT3452	ATG3452	ATS3452	ATSS3452	3/4 x 5-1/2	3-1/4	3-1/4	10/60
AT3461	ATG3461	ATS3461	ATSS3461	3/4 x 6-1/4	3-1/4	3-3/4	10/60
AT3470	ATG3470	ATS3470	ATSS3470	3/4 x 7	3-1/4	4-3/4	10/60
AT3482	ATG3482	ATS3482	ATSS3482	3/4 x 8-1/2	3-1/4	5	10/40
AT3410	ATG3410	ATS3410	ATSS3410	3/4 x 10	3-1/4	5	10/40
AT3412		ATS3412	ATSS3412*	3/4 x 12	3-1/4	5	5/20
	ATG3412			3/4 x 12	3-1/4	5	4/16
AT7860		ATS7860	ATSS7860	7/8 x 6	3-7/8	3-1/2	5/30
	ATG7860			7/8 x 6	3-7/8	3-1/2	4/24
AT7880		ATS7880	ATSS7880	7/8 x 8	3-7/8	5	5/20
	ATG7880			7/8 x 8	3-7/8	5	4/16
AT7810		ATS7810	ATSS7810	7/8 x 10	3-7/8	5	5/20
	ATG7810			7/8 x 10	3-7/8	5	4/16
AT1060		ATS1060	ATSS1060	1 x 6	4	3	5/30
	ATG1060			1 x 6	4	3	4/24
AT1090		ATS1090	ATSS1090	1 x 9	4	5	5/20
	ATG1090			1 x 9	4	5	4/16
AT1012		ATS1012	ATSS1012	1 x 12	4	5	5/20
	ATG1012			1 x 12	4	5	4/16
AT11490		ATS11490*	ATSS11490*	1-1/4 x 9	5-5/8	5	4/16
	ATG11490*			1-1/4 x 9	5-5/8	5	4/12
AT11412		ATS11412*	ATSS11412*	1-1/4 x 12	5-5/8	5	4/16
	ATG11412*			1-1/4 x 12	5-5/8	5	4/12