Hex Head Cap Screws – Grade 5

Hex Head Cap Screws – Grade 2
Hot

Hex Head Cap Screws – Grade 5

Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 5 is the most common grade used in manufacturing assembly. Zinc plating, retards the corrosion rate in a normal atmosphere. Tensile Strength: 120,000 psi minimum.
 
Add to Project List
Add to quote
Category: Tags: , ,
  • Description
  • Sizes
  • Tech Specs
  • Downloads

Description

Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 5 is the most common grade used in manufacturing assembly. Zinc plating, retards the corrosion rate in a normal atmosphere. Tensile Strength: 120,000 psi minimum.

Hex bolt length is measured from under the head to the end of the bolt.

Hex bolt length

Note: Thread length on bolts can vary. Some shorter lengths will be fully threaded.

Technical specifications and diagrams like shear and tensile straight ratings go here.

View Technical Specs - Zink: TS-Bolt Specs - Grade 5 - Zink

View Technical Specs - Plain: TS-Bolt Specs - Grade 5 - Plain

View Certification Info: ASTM

Related Products

  •
    Read More
    Quick View

    Pro-Tect System for Pool Enclosures

    PRO-TECT Fastener Protection System consists of a nylon sleeve and a cap that, together, cover and protect the anchor screw. The PRO-TECT nylon sleeve gives protection from electrolysis, providing worry-free installation while extending the life of the product. This is very important for the harsh conditions of the coastal environments and extreme temperatures.
    The PRO-TECT cap snaps onto the top of the nylon sleeve, covering the head of the Blue-Tap anchor screw. Due to its special design, the cap will not come off easily. Caps are available in White and Bronze.
    By repelling water and preventing penetration, PRO-TECT reduces or eliminates the need for warranty work, increasing life expectancy of the structures.

  • Hot
    Quick View

    Original Wej-It® Wedge Anchors

    The Wej-It original Wedge Anchors are time tested with proven reliabilty and has been an industry standard for over 60 years.

  •
    Read More
    Quick View

    Sidewalk Bolt, Stainless Steel

    Also known as shutter screws, the ultra-wide truss head distributes the load over a large area for excellent holding pressure when placing plywood, metal, and fabric hurricane panels or removable track. Made of 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic.

  • Hot
    Quick View

    Hex Head Cap Screws – Grade 8
    Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 8 has a greater tensile strength than Grade 5. Designed for use in high-strength and high-stress applications.
  •
    Read More
    Quick View

    Makita 3/4″ Hollow Sockets

    The Makita Hollow Sockets are designed to accelerate overhead fastening work by reducing time-spent hand threading fasteners over threaded rod. The hollow shafts allow long bolts and threaded rod to pass through in fastening applications while the increased socket lengths provide better access to nuts located in high places in ceiling or ductwork. The 1/4” hex shank is press-fit for durability and drops readily into an impact driver or driver-drill for convenient, automated fastening.

  •
    Quick View

    PanelMate Quick Kit

    This kit contains all of the hardware you need to get started making your home hurricane-resistant. There are 40 PanelMate anchors, along with the bit and driver to properly set them. There are also 40 washers and wing nuts to secure the storm panels to the anchors.

  •
    Read More
    Quick View

    T-Nuts

    T-nuts are barrel shaped fasteners with internal threading, and are used to provide an anchor point for a bolt in a piece of wood, whether a flat board or a dimensional piece. They are especially useful when a flush surface is wanted. T-nuts have a flat base with prongs bent up at 90° angles, parallel to the barrel. After pre-drilling a hole, the t-nut can be fixed in place either by tightening a bolt into it from the top, which pulls the prongs into the wood, or using hammer to pound the locking prongs into the wood until flush.

  • POWER-DROP Drop-In AnchorsPOWER-DROP Drop-In Anchors
    Quick View

    POWER-DROP Drop-In Anchors

    usaPOWER-Drop anchors are internally threaded anchors that provide wedge anchor performance with the convenience of a drop-in anchor. The safety shoulder supports the clip when the anchor is under strain to eliminate bolt-end collapse and/or clip slippage under ultimate loading conditions. The POWER-Drop is seismic rated: allowable values may be increased 33.3% for short-term loading in resisting earthquake or wind loads. Numerous head style and size options are available: they may be used with machine screws, tamper-proof bolts, threaded rod and a variety of other male-threaded fasteners

    Can be used with almost any material, including:

    • Normal Weight Concrete
    • Lightweight Concrete
    • Solid Masonry
  •
    Read More
    Quick View

    SDS Bits for Drop-In Anchor

    SDS Drill bits designed to produce the perfect depth of hole for mini drop-in anchors.
    These bits are made in the USA, and feature a solid hardened steel body design with premium carbide braised in the tip. They also have a wide shoulder to prevent drilling too deep and hitting rebar or high tension wires, and an innovative dust removal design for fast drilling.

  •
    Quick View

    Elite Beam Clamp

    Elite Beam Clamps are used as structural attachments to the top or bottom of metal beams, purlins, channel, or angle iron.