SpecSeal AS205 Elastomer Spray, 5 Gal
SpecSeal® AS200 Elastomeric Spray is designed primarily for the protection of construction joints, curtain wall safing gaps, and certain through-penetrations.
This fire protective joint coating is a water-based, non-halogenated elastomeric coating that contains no solvents, inorganic fibers, nor asbestos. The coating dries to form a flexible, moisture resistant film that can adhere to all common construction surfaces. It provides for up to 50 percent movement. SpecSeal® AS200 is thixotropic and is capable of being applied by airless spray, brush or trowel.
- Description
- Properties
- Data Sheets & Downloads
SpecSeal® AS200 Elastomeric Spray is a water-based fire protective joint coating. It contains no solvents, inorganic fibers, or asbestos, and dries to form a flexible, moisture resistant film that adheres to all common construction surfaces. The coating provides up to 50 percent movement. SpecSeal® AS200 Elastomeric Spray can be applied by airless spray, brush or trowel.
- Applied with airless spray equipment
- Highly flexible to accommodate for dynamic joint conditions
- Tested for up to 4 Hour fire resistance rating when tested to ASTM E1966/UL 2079
- Listed in over 100 UL Tested Curtain Wall Systems
Related Products
-
Quick ViewTouch ‘n Seal, 24 Oz.
A fast and easy, high-yield means to seal cracks and gaps. Patented all-direction dispensing easily maneuvers tight spots. Reusable dispensing means you can restart the can later.
-
Read MoreQuick ViewSpecSeal Collar for Plastic Pipes
SpecSeal SSC Firestop Collars are factory-manufactured firestop devices sized to plastic pipes of up to 6 in. Trade Size. SSC Collars consist of a restraining collar with a factory applied intumescent ensuring the correct amount of material is applied every time. Under fire exposure, SSC Collars quickly expand and collapse combustible piping forming a dense char, resisting the passage of smoke and flame.
-
Read MoreQuick ViewSpecSeal Cast In Place Device
Eliminate core-drilling and firestop after the concrete pour with SpecSeal CID Cast-In Firestop Devices. SpecSeal Cast-In Devices are a sleeve, concrete form and firestop rolled into a single device. SpecSeal Cast-In Devices are available in a range of sizes and heights to accommodate penetrant up to 6″ Trade Size penetrants and concrete depths of up to 36″.
-
Quick ViewFirestop Closet Toilet Flange Gasket
SpecSeal Closet Flange Firestop Gaskets are one-piece, molded rubber, intumescent pads that install beneath a 3″ (76 mm) or 4″ (102 mm) closet flange to effectively firestop the opening. The die cut rubber gasket is perforated to delineate removable inserts sized to accommodate various outer diameters of toilet flanges.
-
Quick ViewBIO Fireshield Gasket, Double Outlet
BIOSTOP® Firestop Gasket is a single component fire rated gasket for use with electrical boxes when addressing the “24 inch rule”. It is mounted on the inside of the cover plate and installed at the same time as the cover plate, covering the opening and providing the necessary fire protection.
When exposed to heat, BIOSTOP® Firestop Gasket’s highly intumescent nature causes it to expand forming a char that will seal off the opening and prevent the spread of flames and limit the temperature rise on the unexposed surfaces. -
Read MoreQuick ViewSpecSeal LCI300 Sealant
SpecSeal® LCI Sealant is a versatile and economical intumescent sealant that has excellent caulking properties as well as high build properties on vertical or overhead surfaces. This single component sealant may be caulked (standard cartridge or bulk loaded), knifed or troweled. In addition, SpecSeal® LCI Sealant does not contain PCB’s or asbestos.
SpecSeal® LCI Sealant is storage stable (when stored according to the manufacturer’s recommendations), and will not separate or shrink when dried (when applied according to the manufacturer's recommendations). SpecSeal® LCI Sealant will adhere to all common construction and penetrant materials and contains no solvents that might adversely effect plastic pipes or cable jackets. -
Read MoreQuick ViewSpecSeal Silicone Joint Sealant
SpecSeal® SIL Silicone Firestop Sealant is a one-part, neutral-curing silicone sealant exhibiting superior performance in applications where sealing openings in walls and floors are needed to control the spread of fire, smoke, toxic gasses, and water during fire conditions.
SpecSeal® SIL Silicone Firestop Sealant is available in non-sag (SIL300) and self-leveling (SIL300SL) grades and may also be used to seal vertical and horizontal joints between metals, masonry, concrete and other common construction materials. SpecSeal® SIL Silicone Firestop Sealant is specially designed for use in static or dynamic joints. SpecSeal® SIL Silicone Firestop Sealant reacts with atmospheric moisture to form a high-strength, durable seal that will adhere to most building substrates without the use of primers. SpecSeal® products do not contain asbestos or PCBs. -
Quick View3M IC 15WB Intumescent Sealant
Designed to prevent the spread of fire, smoke and noxious gas, 3M™ Fire Barrier Sealant IC 15WB+ is a one-part, gun-grade, latex-based, intumescent firestop sealant. This firestop sealant provides up to 3-hour fire protection in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115. In addition, this product is fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079). This sealant has been formulated to form a monolithic firestop seal that also helps minimize sound transfer, acting as a barrier to airborne sound transmission (STC-Rating of 54 when tested in a STC 54-rated wall assembly)
Recommended Applications: HVAC ducts and vents; Metallic and non-metallic pipes, including CPVC pipes; Blank openings; Single and bundled cables; Insulated pipe; Pipe and cable through-penetrations; Busways; Combos; Rated wall, floor and floor-ceiling assemblies; Static construction joints. -
Quick ViewFire Safing Insulation Deck Plugs 4.5″ to 3.5″ Taper, X 48″L
Fire Safing Deck Plugs are precision-cut from noncombustible UL classified high-density mineral wool panels. They are precision sized to fit into the fluted profile of metal decks encountered at top-of-wall joints.
-
Read MoreQuick ViewSpecSeal LCC Firestop Collar Series
The SpecSeal® LCC Collar is a factory-manufactured device designed to protect plastic pipes penetrating fire-rated walls and floors. Utilizing a heavy gauge galvanized metal collar to house a molded intumescent insert, the SpecSeal® LCC Firestop Collar is specifically sized to fit 1-1/2 in, 2 in, 3 in, and 4 in (38 mm, 51 mm, 76 mm and 102 mm) trade sized pipes. When exposed to temperatures in excess of 320°F (160°C), the SpecSeal® LCC Collar’s molded insert begins to expand (intumesce) rapidly to form a dense, highly insulative char. Its free expansion ranges from 32x to 64x original (pre-expanded) volume. Expansion continues up to 1,000°F (538°C).
