Makita Power Assisted Wheelbarrow, 18V X2 LXT
18V X2 LXT® Lithium-Ion Brushless Cordless Power-Assisted Wheelbarrow (XUC01X1) is a convenient solution for material transport on job sites. You can use one or two Makita 18 Volt LXT® batteries: Use one 6 amp-hour battery and get up to 60 minutes of run time under load. For longer run time, drop in a second LXT® battery and double the run time.
- Description
- Features
18V X2 LXT® Lithium-Ion Brushless Cordless Power-Assisted Wheelbarrow (XUC01X1) is a convenient solution for material transport on job sites. You can use one or two Makita 18 Volt LXT® batteries: Use one 6 amp-hour battery and get up to 60 minutes of run time under load. For longer run time, drop in a second LXT® battery and double the run time. Makita brushless motors are engineered for up to 50% longer run time, increased power and speed, and longer tool life, and the Hand-Truck/Wheelbarrow has a Makita-built BL™ Brushless Motor that provides high power efficiency for transporting up to 287 lbs. of material on job sites. It has 2 speed settings, with a maximum speed of 2.5 MPH on a 12-degree incline. For versatility and convenience, the wheelbarrow is reversible with side rails on the flat bed for easy up and down installation.
Additional accessories include a steel tube flat bed (sold separately) and steel bucket (included). For added convenience, the rear wheels can be detached and replaced with easy-installed L-shaped legs. L.E.D. lights are located on each side of frame help illuminate the work area. The Power-Assisted Hand Truck features Extreme Protection Technology (XPT™), engineered for increased dust and water resistance for operation in harsh job site conditions.
RUN TIME : Delivers up to 60 minutes of run time using one 18V LXT® 6.0Ah BL1860 battery
INNOVATION : Holds (2) 18V LXT® batteries but operates using (1) 18V battery at a time
POWER : 2-speed with maximum speed up to 2.5 MPH on a 12º incline
CONVENIENCE : Interchangeable steel bucket or steel tube flat bed (flat bed optional)
INCLUDES : Steel bucket, frame with motor and tire, rear wheels and L-shaped legs (steel flat bed frame not included)
- Delivers up to 60 minutes of run time (distance equivalent to one mile) under load using one 18V LXT® 6.0Ah BL1860 battery
- Holds (2) 18V LXT® Lithium-Ion batteries but operates using (1) 18V battery at a time; utilizes second battery when needed
- Makita-built BL™ Brushless Motor for optimal performance
- 2-speed with maximum speed up to 2.5 MPH on a 12º incline
- Reversible for versatility and convenience
- Interchangeable steel bucket or steel tube flat bed (flat bed optional)
- Maximum load capacity up to 287 lbs.
- 7" mechanical disc brake for faster stopping
- L-shaped legs can be easily installed to replace rear wheels
- L.E.D. lights on each side of frame to illuminate the work area
- L.E.D. battery charge indicators show charge level for each 18V LXT® battery
- Weighs 88 lbs. with bucket for reduced operator fatigue
- Rubberized soft grip handles provide increased comfort on the job; adjust to 3 heights
- Features Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditions
- 3-year limited warranty
Related Products
-
Makita Subcompact Impact /Hammer Drill Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX202RB is a combo kit with two 18V Sub-Compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless hammer driver-drill with two speed settings that weighs only 2.8 lbs. The percussive hammer-drill setting allows for drilling into masonry and brick. The variable speed brushless impact driver has two speed settings and weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries,which feature an integrated L.E.D. battery charge level indicator.
-
Makita 7-1/4″ Circular Saw
Makita engineered the 7-1/4” Circular Saw (model 5007F) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, and job site durability. The 5007F is ideal for a range of framing and cutting applications.
The 5007F is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4” circular saw. -
Makita Subcompact Radio /Impact /Driver Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX301RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless driver-drill that weighs only 2.8 lbs., and a variable speed brushless impact driver that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes an 18V LXT® Job Site Radio with Bluetooth® and MP3 compatibility. The kit includes two 18V LXT® Compact 2.0Ah batteries, which feature an integrated L.E.D. battery charge level indicator.
-
Makita 10″ Table Saw with Stand
Makita’s 10” Contractor Table Saw with Portable Stand is a versatile and powerful table saw for use in the shop or on the jobsite. It combines a range of convenience and ease-of-use features with large capacity and 15 AMP power, making it a true best-in-class table saw for a range of professional applications. The portable stand is jobsite tough for easy transport.
The 2705X1 is a versatile and powerful table saw for use in the shop or on the job site. It’s engineered for remodelers, furniture makers, finish carpenters, cabinet installers, decking and flooring contractors, and general contractors seeking a best-in-class 10” Contractor table saw for the jobsite or on the benchtop. -
Makita 14″ Chain Saw Kit, LXT 18V X2 (36V)
Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT® (36V) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.
The XCU03PT has a 14” guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there’s no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a “tool-less” chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.
It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
-
Makita 3/8″ Angle Drill w/Cord Paddle Switch
With a 10-5/8 in. long body and 2-5/8 in. head width, the Makita 3/8 in. Angle Drill (model DA3010F) provides a compact solution when working between framing studs and other close quarter applications. The paddle switch with variable speed provides increased user convenience, and the torque-limiting clutch is engineered to disengage the gears if the bit binds. The LED light illuminates the work surface for improved visibility.
-
Makita 3-1/2″ Framing Coil Nailer
The Makita 3-1/2″ Framing Coil Nailer combines power with less weight for increased performance and versatility. The AN902 weighs only 7.7 lbs. but drives 1-3/4″ to 3-1/2″ coil framing nails. Additional features include a “tool-less” depth adjustment engineered for more precise flush and countersink nailing and a contact mode trigger. The AN902 is ideal for framing, sheathing, fencing, decking and more.
-
Makita Multi‑Tool Kit
Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.
Power and Performance
The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding.
The TM3010CX1 also features a range of comfort and convenience features including reduced vibration (6 m/s²) and lower noise (74dB), a small diameter barrel grip, and a large on/off slide switch with lock-on button. The “tool-less” clamp system provides easier removal and installation of accessories.
The TM3010CX1 is engineered for a full range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class multi-tool.
-
Makita 5″ Random Orbit Sander, 12,000 OPM
Makita’s 5-Inch Random Orbit Sander delivers fast, smooth performance with better grip and control. The BO5030 is ideal for woodworkers and finish carpenters who require a best-in-class random orbit sander. It features a pad control system for controlled pad speed upon start up, with a powerful 3 AMP motor for continuous operation, 1/8-inch random orbit action, and 12,000 OPM for fast and smooth sanding. The BO5030 is precision engineered with all ball bearing construction for longer tool life.
-
Makita 13″ Jobsite Fan 3-Speed, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless 13”Job Site Fan (DCF300Z) is another portable and powerful cordless solution for contractors. Up to 5.7 hours of portable air flow with the 18V LXT® Lithium-Ion 5.0 Ah battery makes this ideal for improved air circulation in close quarters, increased air flow for painters, and more. Three speed settings and an oscillation selector lets the user select optimal air velocity and control. For added convenience, the 3-stage automatic timer offers 1, 2 and 4-hour power-off selection. The fan has a durable design and the protective bumpers are engineered to withstand a job site environment.
























