3M Fire Barrier CP-25WB+
Dependable and Easy-to-Use Firestop Sealant
Tough and ready-to-use, 3M™ Fire Barrier Sealant CP 25WB+ is a high-performance, one-component, latex-based, intumescent sealant that dries to form a monolithic firestop seal. This sealant also acts as a barrier to airborne sound transmission. As penetrants are exposed to fire, the unique intumescent property of this material allows 3M™ Fire Barrier Sealant CP 25WB+ to expand and help maintain a firestop penetration seal for up to 4 hours. This sealant is designed to help control the spread of fire, smoke and noxious gases before, during and after exposure to a fire when installed in accordance with a listed through-penetration or fire-resistive joint assembly system (STC-Rating of 54 when tested in a STC 54-rated wall assembly).
- Description
- Downloads
- Applications
- Specifications
Description
- Firestop tested for through penetration applications up to 4 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115
- Applied with conventional caulking equipment with excellent caulk rate
- Sag-resistant properties offer clean application as well as strong adhesion
- Water-based and paintable sealant provides easy application and clean-up
- Sealant is re-enterable and repairable
- Fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079)
- Sealant helps minimize sound transfer
Download the MSDS PDF: MSDS
Recommended Applications
- HVAC ducts and vents
- Metallic and non-metallic pipes
- Blank openings
- Single and bundled cables
- Insulated pipe
- Pipe and cable through-penetrations
- Busways
- Combos
- Rated wall, floor and floor-ceiling assemblies
- Static construction joints
Related Products
-
Quick ViewBIO Fireshield Gasket, Double Outlet
BIOSTOP® Firestop Gasket is a single component fire rated gasket for use with electrical boxes when addressing the “24 inch rule”. It is mounted on the inside of the cover plate and installed at the same time as the cover plate, covering the opening and providing the necessary fire protection.
When exposed to heat, BIOSTOP® Firestop Gasket’s highly intumescent nature causes it to expand forming a char that will seal off the opening and prevent the spread of flames and limit the temperature rise on the unexposed surfaces. -
Quick View3M Fire Barrier Sealant IC 15 WB+
Establish a Strong Firestop Barrier
Designed to prevent the spread of fire, smoke and noxious gas, 3M™ Fire Barrier Sealant IC 15WB+ is a one-part, gun-grade, latex-based, intumescent firestop sealant. This firestop sealant provides up to 3-hour fire protection in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115. In addition, this product is fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079). This sealant has been formulated to form a monolithic firestop seal that also helps minimize sound transfer, acting as a barrier to airborne sound transmission (STC-Rating of 54 when tested in a STC 54-rated wall assembly). -
Read MoreQuick View
SpecSeal Putty Tube or Pad
SSP Putty & Putty Pads
SpecSeal SSP Firestop Putty excels at sealing cabling penetrations and outlet boxes. SSP Putty is non-hardening and easily hand works around grouped cabling penetrations forming a re-enterable seal allowing for future work. When applied with outlet boxes, SSP Putty easily works into voids and seams forming a continuous seal against fire and the products of combustion. -
Read MoreQuick View
SpecSeal Silicone Joint Sealant
SpecSeal® SIL Silicone Firestop Sealant is a one-part, neutral-curing silicone sealant exhibiting superior performance in applications where sealing openings in walls and floors are needed to control the spread of fire, smoke, toxic gasses, and water during fire conditions.
SpecSeal® SIL Silicone Firestop Sealant is available in non-sag (SIL300) and self-leveling (SIL300SL) grades and may also be used to seal vertical and horizontal joints between metals, masonry, concrete and other common construction materials. SpecSeal® SIL Silicone Firestop Sealant is specially designed for use in static or dynamic joints. SpecSeal® SIL Silicone Firestop Sealant reacts with atmospheric moisture to form a high-strength, durable seal that will adhere to most building substrates without the use of primers. SpecSeal® products do not contain asbestos or PCBs. -
Quick View
SPEC SEAL EZD22 EZ-PATH FIRE RATED PATHWAY
The EZ Path® Series 22 Fire Rated Pathway is a maintenance-free pathway device designed to allow cables to penetrate fire-rated walls without the need for firestopping. This device features a built-in fire sealing system that automatically adjusts to the amount of cables installed. Once installed in a fire barrier, cables can be easily added or removed at any time without the need to remove or reinstall firestopping materials.
-
Quick View
Firestop Closet Toilet Flange Gasket
SpecSeal Closet Flange Firestop Gaskets are one-piece, molded rubber, intumescent pads that install beneath a 3″ (76 mm) or 4″ (102 mm) closet flange to effectively firestop the opening. The die cut rubber gasket is perforated to delineate removable inserts sized to accommodate various outer diameters of toilet flanges.
-
Read MoreQuick View
SpecSeal LC 150 Series Sealant
SpecSeal LC 150 Endothermic Sealant is a latex-based gun grade firestop sealant for construction joints and non-combustible penetrations. SpecSeal® LC Sealant is engineered to adhere well to virtually all construction surfaces and may be applied using a standard caulk gun or by troweling with a standard mason’s trowel or with a putty knife. After application, LC Sealant cures to form a flexible seal against the propagation of fire. Under fire exposure, LC absorbs heat and releases water vapor resisting the progress of smoke and flame.
-
Read MoreQuick View
SpecSeal LCI300 Sealant
SpecSeal® LCI Sealant is a versatile and economical intumescent sealant that has excellent caulking properties as well as high build properties on vertical or overhead surfaces. This single component sealant may be caulked (standard cartridge or bulk loaded), knifed or troweled. In addition, SpecSeal® LCI Sealant does not contain PCB’s or asbestos.
SpecSeal® LCI Sealant is storage stable (when stored according to the manufacturer’s recommendations), and will not separate or shrink when dried (when applied according to the manufacturer's recommendations). SpecSeal® LCI Sealant will adhere to all common construction and penetrant materials and contains no solvents that might adversely effect plastic pipes or cable jackets. -
Read MoreQuick View
SpecSeal SSW Wrap Strip, Pre-Cut or 12 Ft Roll
-
Read MoreQuick View
SpecSeal LCC Firestop Collar Series
The SpecSeal® LCC Collar is a factory-manufactured device designed to protect plastic pipes penetrating fire-rated walls and floors. Utilizing a heavy gauge galvanized metal collar to house a molded intumescent insert, the SpecSeal® LCC Firestop Collar is specifically sized to fit 1-1/2 in, 2 in, 3 in, and 4 in (38 mm, 51 mm, 76 mm and 102 mm) trade sized pipes. When exposed to temperatures in excess of 320°F (160°C), the SpecSeal® LCC Collar’s molded insert begins to expand (intumesce) rapidly to form a dense, highly insulative char. Its free expansion ranges from 32x to 64x original (pre-expanded) volume. Expansion continues up to 1,000°F (538°C).
