Tek Self-Drilling Screws
Teks screws provide secure fastening to metal with strong holding power, without the need to pre-drill. High performance cutting tips are designed to quickly penetrate the metal surface for easy installation. Self-tapping threads ensure strong holding power, in either sheet metal or steel beams. There are even Teks screws for wood-to-metal applicaitons.
Standard grade Teks screws are ideal for attaching HVAC, electrical work, metal framing, and general light to medium applications. The TRAXX grades are designed for heavier applications, and are available in Stainless Steel and Hardened Steel.
There are also several types that include neoprene washers, to seal the drill site against rain or other water.
Please answer the following questions to find the exact Teks screw that you need.
- Additional information
- Description
- Applications
- Video
Additional information
| Are you drilling through wood into metal? | No, Metal to Metal, Yes, Plywood/OSD, Yes, Dimensional Lumber |
|---|---|
| What thickness and type of metal are you drilling through? | Light Gauge (sheet metal, studs), Medium Gauge (boxes, plates, posts), Heavy Gauge (plate steel, red iron, beams) |
| Do you need a neoprene washer under the head? | Yes, Need Neoprene Washer, No Neoprene Washer |
| What color does the screw need to be? | Plain or Protective Coated, Bronze, White |
| What driver type will be used? | Hex driver, Phillips driver |
| What head style will be used? | Hex Washer Head, Flat Head, Oval Head, Pan Head |
| What material or finish will be used? | Zinc, Hardened Steel (Traxx), Stainless 18-8, Stainless 300, Stainless 410, Bi-Metal, Aluminum |
| What length tek screw will be needed? | 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/4″, 1-7/16″, 1-1/2″, 1-3/4″, 2″, 2-1/4″, 2-1/2″, 2-3/4″, 3″, 3-1/4″, 4″, 5″, 6″, 8″ |
| What diameter tek screw will be needed? | #6, #8, #10, #10 Premium, #10 High Hat, #12, #14, #14 High Hat, #17, 1/4″, 3/8″ |
Teks screws provide secure fastening to metal with strong holding power, without the need to pre-drill. High performance cutting tips are designed to quickly penetrate the metal surface for easy installation. Self-tapping threads ensure strong holding power, in either sheet metal or steel beams. There are even Teks screws for wood-to-metal applicaitons.
Standard grade Teks screws are ideal for attaching HVAC, electrical work, metal framing, and general light to medium applications. The TRAXX grades are designed for heavier applications, and are available in Stainless Steel and Hardened Steel.
There are also several types that include neoprene washers, to seal the drill site against rain or other water.
- Plywood to metal surface
- Dimensional lumber to steel frame
- Stitch roof deck and wall panel sidelaps
- HVAC, electrical trim accessories to steel framing
- Residential steel frame construction
- Brick ties to steel framing
- Track to stud and stud splicing
- Hat channel to stud
- Metal deck to structural steel or bar joist
- Clips to structural steel or bar joist
- Liner panels to structural steel or bar joist
- Accessories to structural steel or bar joist
- Longer length fasteners can be used in retrofit clip and sheet applications
- Roof panel to purlin and wall panel to girt
- Stitching roof, wall, fascia, eave panels or gutter straps
- Roof and wall panel or accessories over blanket insulation to steel framing
- #17 diameter replacement for stripped #12, #14, and 1/4" diameter fasteners
Related Products
-
Read MoreQuick ViewRiser Clamp, Stainless Steel
Riser clamps are a two point load bearing component and are usually used for vertical running pipe lines wherein shear lugs are welded to the pipe, the riser clamp top surface contacts the shear lug, and the load is transferred through the legs of the clamps to the support component such as the floor. This riser clamp is made from stainless steel, giving it superb rust resistance.
-
Quick ViewMakita Couple Shaft String Trimmer Attachment
Makita is giving landscapers more options with both MM4® 4-Stroke Engine and 18V X2 LXT® (36V) cordless couple-shaft power heads (sold separately), and the String Trimmer Couple Shaft Attachment is the right accessory for use with this versatile system. It quickly attaches to the power head for easy operation. The M10 x 1.25 LH shaft arbor fits common sized trimmer heads for increased versatility, with bump and feed for increased efficiency. The steel drive shaft is engineered for lower vibration and longer service life.
-
Quick View
Makita 20″ 56cc Farm / Ranch Chainsaw
The Makita 20” 56cc Chain Saw combines a high power-to-weight ratio with easier starts and lower vibration for a full range of applications. The 56cc engine delivers 4.0 HP and an engine speed of 13,800 RPM, with an Easy Start spring-assisted starter. Heavy-duty cartridge filter system increases durability while reducing frequency of maintenance. Additional features include an easy-to-clean chain compartment for efficient clearing of chips, even when rip cutting, and the advanced vibration dampening system is engineered to reduce vibration. The EA5600FRGG is engineered for a range of cutting and trimming applications, and is ideal for farm and ranch work environments.
-
Read MoreQuick View
Spring Nut, 316 Stainless Steel
Spring nuts are designed to secure threaded rod and bolts to strut. They have ‘teeth’ that secure them in place and prevent sideways movement under load.
These spring nuts are made from stainless steel, for excellent rust protection. They are appropriate for any interior, covered open space, or exterior location. -
Quick View
3-Hole Corner Angle L Bracket, Stainless
This connector is used for connecting metal struts together, at a 90° angle. The two sides are 3-1/2″ and 2-1/2″ long, with three 9/16″ holes to secure to struts or other surfaces. Stainless steel material makes this product more rust resistant, and it is suitable for exterior uses where rain or salt water are expected.
-
Quick View
PAM #8 X 2-1/2″ Roof Tile Screws
Stainless steel tile roofing screws for use with the PAM auto-feed screw system. These screws are #8 x 2-1/2″ and used for attaching roof tile to wood. The type 17 point improves penetration of tile.
Meets Miami-Dade County, FL Protocol PA 114-95, Appendix E, Section 2 (ASTM G85). Box of 1,000 screws. -
HotQuick View
Hex Lag Screws
Lag bolts are large wood screws with hexagonal heads often called a lag screw. Hex heads are six sided for use with a wrench.
-
Quick View
Makita Straight Metal Shear, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless 18 Gauge Straight Shear (model XSJ01) combines high speed, compact size and less weight. The XSJ01Z has a Makita-built 4-pole motor that delivers 2,800 strokes per minute (SPM) for faster cutting. The tough double-cut shear design handles up to 18 gauge mild steel and 20 gauge stainless steel for straight or scribe cuts without deforming the material. The swivel shear head rotates 360 degrees for increased cutting options. yet it weighs just 5.3 lbs. for better control in cutting steel and stainless steel sheet metal.
The XSJ01Z is a powerful yet compact metal shear built for any professional user seeking a best-in-class compact cordless metal shear for metalworking tasks. -
Read MoreQuick View
All Thread, Threaded Rod
Threaded rod has continuous threading, either on both ends or it may extend along the complete length of the rod. It has no head or fashioned tip. Threaded rod can be used as an anchor bolt, clamp, hanger or U-bolt.
Threaded rod is available in carbon steel, as Plain, Zinc Plated and HDG, as well as Stainless Steel and the B7/A193 alloy. -
Quick View
Makita Couple Shaft 10″ Chain Saw Attachment
Makita is giving landscapers more options with both MM4® 4-Stroke Engine and 18V X2 LXT® (36V) cordless couple-shaft power heads, and the Pole Saw Couple Shaft Attachment is the right accessory for nslucent bar oil tank with adjustable automatic chain lubrication, with a steel drive shaft engineered for lower vibration and longer service life. It quickly attaches to the Makita power head for easy operation.
