Strut, 1-5/8″, 10′, 12GA Heavy Duty, Stainless Steel
Strut channel, often referred to as Unistrut, is used for light structural support, often for supporting wiring, plumbing, or mechanical components such as air conditioning or ventilation systems.
This piece is regular size at 1-5/8″ deep, with slots on 2″ centers, and is made from 12 gauge stainless steel, for heavy duty applications and great rust protection.
- Description
- Strut Options
Strut channel, often referred to as Unistrut, is used for light structural support, often for supporting wiring, plumbing, or mechanical components such as air conditioning or ventilation systems.
This piece is regular size at 1-5/8" deep, with slots on 2" centers, and is made from 12 gauge stainless steel, for heavy duty applications and great rust protection.
13/16" X 1-5/8" X 10', 14GA, Slots on 2" Centers
13/16" X 1-5/8" X 20', 14GA, Slots on 2" Centers
13/16" X 1-5/8" X 10', 14GA, Slots on 2" Centers, HDG
13/16" X 1-5/8" X 10', 14GA, Slots on 2" Centers, Stainless Steel
1-5/8" X 1-5/8" X 10', 14GA, Slots on 2" Centers
1-5/8" X 1-5/8" X 20', 14GA, Slots on 2" Centers
1-5/8" X 1-5/8" X 10', 14GA, Slots on 2" Centers, HDG
1-5/8" X 1-5/8" X 10', 12GA Heavy Duty, Slots on 2" Centers
1-5/8" X 1-5/8" X 10', 14GA, Slots on 2" Centers, Stainless Steel
1-5/8" X 1-5/8" X 10', 12GA Heavy Duty, Slots on 2" Centers, Stainless Steel
Related Products
-
Read MoreQuick ViewClevis Pipe Hanger, Stainless Steel
A clevis hanger is a pipe attachment providing vertical adjustment, consisting of a clevis type top bolted to a formed steel bottom strap. They are recommended for the suspension of non-insulated, stationary pipe lines. This clevis hanger is made from stainless steel, giving it superb rust resistance. It is suitable for any interior use, as well as exterior use.
-
Quick View7-Hole Universal Shelf Bracket
This plate connector can be used to secure a piece of strut 90° to another, or to place a protruding shelf onto strut
-
Quick ViewConcrete Insert Box, Ceiling, Galvanized
The concrete insert box is designed to allow attachment of threaded rod in a ceiling, and is installed before the cement is poured into the wooden form. Once the cement hardens, and the form is removed, the knockout plate is removed and a concrete insert nut is placed inside. The threaded rod is then screwed into the nut, providing support for equipment to be mounted to.
This version of this equipment is galvanized, and can be used in interior or exterior placements. -
Read MoreQuick ViewCaddy 1-Hole Strap for Conduit
The CPVC One Hole Wrap Around Pipe Strap is designed to support pipe running horizontally on side of a beam, or as a guide to mount CPVC pipe running perpendicular across the top of a beam, or on a vertical run. Model 1070 may be installed onto wood using supplied fastener, or into minimum 20 gauge steel using one 1/4″ x 1 tek screw.
-
Read MoreQuick ViewConcrete Insert Nut
The concrete insert nut is specifically made to fit inside a concrete insert box, which was embedded in the cement ceiling when it was poured. The insert nut allows threaded rod to be suspended, for the mounting of equipment.
-
Quick ViewElite Beam Clamp
Elite Beam Clamps are used as structural attachments to the top or bottom of metal beams, purlins, channel, or angle iron.
-
Read MoreQuick ViewCaddy Stand-Off Strap, 2-Hole for Conduit
Two-hole stand-off straps are used for mounting CPVC pipe to a wall, ceiling, or other surface. They eliminate the need for wood blocks under the pipe. They position the pipe 1-1/2″ off the surface.
-
Read MoreQuick ViewClevis Pipe Hanger, Galvanized
A clevis hanger is a pipe attachment providing vertical adjustment, consisting of a clevis type top bolted to a formed steel bottom strap. They are recommended for the suspension of non-insulated, stationary pipe lines. These hangers have been given an electroplated galvanized finish which provides general rust resistance, and are suitable for any interior uses.
-
Quick View
Concrete Insert Box, Ceiling
The concrete insert box is designed to allow attachment of threaded rod in a ceiling, and is installed before the cement is poured into the wooden form. Once the cement hardens, and the form is removed, the knockout plate is removed and a concrete insert nut is placed inside. The threaded rod is then screwed into the nut, providing support for equipment to be mounted to.
-
Quick View4-Hole Corner Plate
This basic plate connector can be used to secure three pieces of strut together, with the ends of two pieces against a third strut between them.
