Tek Self-Drilling Screws
Teks screws provide secure fastening to metal with strong holding power, without the need to pre-drill. High performance cutting tips are designed to quickly penetrate the metal surface for easy installation. Self-tapping threads ensure strong holding power, in either sheet metal or steel beams. There are even Teks screws for wood-to-metal applicaitons.
Standard grade Teks screws are ideal for attaching HVAC, electrical work, metal framing, and general light to medium applications. The TRAXX grades are designed for heavier applications, and are available in Stainless Steel and Hardened Steel.
There are also several types that include neoprene washers, to seal the drill site against rain or other water.
Please answer the following questions to find the exact Teks screw that you need.
- Additional information
- Description
- Applications
- Video
Additional information
| Are you drilling through wood into metal? | No, Metal to Metal, Yes, Plywood/OSD, Yes, Dimensional Lumber |
|---|---|
| What thickness and type of metal are you drilling through? | Light Gauge (sheet metal, studs), Medium Gauge (boxes, plates, posts), Heavy Gauge (plate steel, red iron, beams) |
| Do you need a neoprene washer under the head? | Yes, Need Neoprene Washer, No Neoprene Washer |
| What color does the screw need to be? | Plain or Protective Coated, Bronze, White |
| What driver type will be used? | Hex driver, Phillips driver |
| What head style will be used? | Hex Washer Head, Flat Head, Oval Head, Pan Head |
| What material or finish will be used? | Zinc, Hardened Steel (Traxx), Stainless 18-8, Stainless 300, Stainless 410, Bi-Metal, Aluminum |
| What length tek screw will be needed? | 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/4″, 1-7/16″, 1-1/2″, 1-3/4″, 2″, 2-1/4″, 2-1/2″, 2-3/4″, 3″, 3-1/4″, 4″, 5″, 6″, 8″ |
| What diameter tek screw will be needed? | #6, #8, #10, #10 Premium, #10 High Hat, #12, #14, #14 High Hat, #17, 1/4″, 3/8″ |
Teks screws provide secure fastening to metal with strong holding power, without the need to pre-drill. High performance cutting tips are designed to quickly penetrate the metal surface for easy installation. Self-tapping threads ensure strong holding power, in either sheet metal or steel beams. There are even Teks screws for wood-to-metal applicaitons.
Standard grade Teks screws are ideal for attaching HVAC, electrical work, metal framing, and general light to medium applications. The TRAXX grades are designed for heavier applications, and are available in Stainless Steel and Hardened Steel.
There are also several types that include neoprene washers, to seal the drill site against rain or other water.
- Plywood to metal surface
- Dimensional lumber to steel frame
- Stitch roof deck and wall panel sidelaps
- HVAC, electrical trim accessories to steel framing
- Residential steel frame construction
- Brick ties to steel framing
- Track to stud and stud splicing
- Hat channel to stud
- Metal deck to structural steel or bar joist
- Clips to structural steel or bar joist
- Liner panels to structural steel or bar joist
- Accessories to structural steel or bar joist
- Longer length fasteners can be used in retrofit clip and sheet applications
- Roof panel to purlin and wall panel to girt
- Stitching roof, wall, fascia, eave panels or gutter straps
- Roof and wall panel or accessories over blanket insulation to steel framing
- #17 diameter replacement for stripped #12, #14, and 1/4" diameter fasteners
Related Products
-
Quick ViewMakita 25-1/2″ Hedge Trimmer, 18V X2 LXT
The Makita 18V X2 LXT® Hedge Trimmer (model XHU04Z) is powered by two 18V LXT® batteries (36V), so you get 36V power and run time for gas-powered demands, without leaving the 18V LXT® platform. The XHU04Z Hedge Trimmer has a 25-1/2″ blade and the Makita-built motor delivers 3,600 SPM for increased cutting speed, but with less noise. The cordless XHU04Z has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there’s no need to drain the fuel for storage. Simply pickup your XHU04Z, load two 18V LXT® Lithium-Ion batteries, and the trimmer is ready to use.
-
Read MoreQuick View
Flat Washers, USS & SAE
-
Quick View
Makita Couple Shaft Bristle Brush Attachment 23-5/8″
The Makita Bristle Brush Couple Shaft Attachment is the perfect accessory for Makita 18V X2 LXT (36V) and MM4 4-Stroke Engine Couple Shaft Power Heads (sold separately). The Bristle Brush Couple Shaft Attachment features a wide sweeping surface of 23-5/8” and durable nylon bristles for optimum performance. The steel drive shaft reduces vibration and increases equipment life.
-
Read MoreQuick View
All Thread, Threaded Rod
Threaded rod has continuous threading, either on both ends or it may extend along the complete length of the rod. It has no head or fashioned tip. Threaded rod can be used as an anchor bolt, clamp, hanger or U-bolt.
Threaded rod is available in carbon steel, as Plain, Zinc Plated and HDG, as well as Stainless Steel and the B7/A193 alloy. -
Read MoreQuick View
Lock Washers
-
Quick View
Strut, 13/16″, 10′, 14GA Stainless Steel
-
Quick View
Makita 20″ 56cc Farm / Ranch Chainsaw
The Makita 20” 56cc Chain Saw combines a high power-to-weight ratio with easier starts and lower vibration for a full range of applications. The 56cc engine delivers 4.0 HP and an engine speed of 13,800 RPM, with an Easy Start spring-assisted starter. Heavy-duty cartridge filter system increases durability while reducing frequency of maintenance. Additional features include an easy-to-clean chain compartment for efficient clearing of chips, even when rip cutting, and the advanced vibration dampening system is engineered to reduce vibration. The EA5600FRGG is engineered for a range of cutting and trimming applications, and is ideal for farm and ranch work environments.
-
Read MoreQuick View
Riser Clamp, Stainless Steel
Riser clamps are a two point load bearing component and are usually used for vertical running pipe lines wherein shear lugs are welded to the pipe, the riser clamp top surface contacts the shear lug, and the load is transferred through the legs of the clamps to the support component such as the floor. This riser clamp is made from stainless steel, giving it superb rust resistance.
-
Quick View
3-Hole Corner Angle L Bracket, Stainless
This connector is used for connecting metal struts together, at a 90° angle. The two sides are 3-1/2″ and 2-1/2″ long, with three 9/16″ holes to secure to struts or other surfaces. Stainless steel material makes this product more rust resistant, and it is suitable for exterior uses where rain or salt water are expected.
-
Quick View
Strut, 1-5/8″, 10′, 12GA Heavy Duty, Stainless Steel
Strut channel, often referred to as Unistrut, is used for light structural support, often for supporting wiring, plumbing, or mechanical components such as air conditioning or ventilation systems.
This piece is regular size at 1-5/8″ deep, with slots on 2″ centers, and is made from 12 gauge stainless steel, for heavy duty applications and great rust protection.
