Ramset T3 Fuel Cell, 2-Pack
All fuel cells replace conventional powder loads and drive more than 1000 shots.
- Description
- Safety & Disposal
- Data Sheets & Downloads
All fuel cells replace conventional powder loads and drive more than 1000 shots.
Disposal
The fuel cell is basically an aerosol can, check with your local regulations for disposal.nbsp;
Fuel Cell: propylene/butylenes mix
Fuel Safety Instructions
Always store fuel cells where they will not be exposed to an open flame, sparks or temperatures above 120 degrees F (48 degrees C).
Fuel cells are good for 12 months. Check expiration date on bottom of can.
Related Products
-
Hot
Quick ViewHex Head Cap Screws – Grade 5
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 5 is the most common grade used in manufacturing assembly. Zinc plating, retards the corrosion rate in a normal atmosphere. Tensile Strength: 120,000 psi minimum. -
HotQuick View
Ankr-TITE Wej-It Anchors
This anchor is a high-strength, fully threaded, and torque-controlled expansion anchor designed for anchoring into normal-weight concrete, lightweight concrete, and grouted concrete masonry.
-
Read MoreQuick View
Pro-Tect System for Pool Enclosures
PRO-TECT Fastener Protection System consists of a nylon sleeve and a cap that, together, cover and protect the anchor screw. The PRO-TECT nylon sleeve gives protection from electrolysis, providing worry-free installation while extending the life of the product. This is very important for the harsh conditions of the coastal environments and extreme temperatures.
The PRO-TECT cap snaps onto the top of the nylon sleeve, covering the head of the Blue-Tap anchor screw. Due to its special design, the cap will not come off easily. Caps are available in White and Bronze.
By repelling water and preventing penetration, PRO-TECT reduces or eliminates the need for warranty work, increasing life expectancy of the structures. -
Read MoreQuick View
T-Nuts
T-nuts are barrel shaped fasteners with internal threading, and are used to provide an anchor point for a bolt in a piece of wood, whether a flat board or a dimensional piece. They are especially useful when a flush surface is wanted. T-nuts have a flat base with prongs bent up at 90° angles, parallel to the barrel. After pre-drilling a hole, the t-nut can be fixed in place either by tightening a bolt into it from the top, which pulls the prongs into the wood, or using hammer to pound the locking prongs into the wood until flush.
-
Sleeve-TITE Sleeve Expansion Anchors
Sleeve-TITE Expansion Anchors come fully assembled and ready to use. This speeds installation and eliminates the p
roblem of missing components. Sleeve-TITE is suitable for a wide variety of applications and available with acorn or hex nut, or flat head, or with rod coupling.Can be used with almost any material, including:
- Normal Weight Concrete
- Lightweight Concrete
- Hollow Masonry
- Solid Masonry
-
Read MoreQuick View
SDS Bits for Drop-In Anchor
SDS Drill bits designed to produce the perfect depth of hole for mini drop-in anchors.
These bits are made in the USA, and feature a solid hardened steel body design with premium carbide braised in the tip. They also have a wide shoulder to prevent drilling too deep and hitting rebar or high tension wires, and an innovative dust removal design for fast drilling. -
HotQuick View
Hex Head Cap Screws – Grade 8
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 8 has a greater tensile strength than Grade 5. Designed for use in high-strength and high-stress applications. -
HotQuick View
Original Wej-It® Wedge Anchors
The Wej-It original Wedge Anchors are time tested with proven reliabilty and has been an industry standard for over 60 years.
-
HotQuick View
Hex Head Cap Screws – Stainless
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Stainless Steel Hex Cap Screws meet SAE and ASTM F593 specifications with a specially designed washer face under the head and a chamfered point. -
Quick View
Elite Beam Clamp
Elite Beam Clamps are used as structural attachments to the top or bottom of metal beams, purlins, channel, or angle iron.
roblem of missing components. Sleeve-TITE is suitable for a wide variety of applications and available with acorn or hex nut, or flat head, or with rod coupling.
