Makita XGT 40V Cordless Power Source

Makita XGT 80V MAX 28 lb. Demolition Hammer, SDS‑MAX
Makita ConnectX 1200Wh Portable Backpack Power Supply

Makita XGT 40V Cordless Power Source

Turn your Makita 40V max XGT Battery into a charging port with the 40V max XGT Cordless Power Source. Mount the ADP001G on to your compatible battery for two USB charging ports. Each USB port delivers 2.4A output. It automatically turns off the USB output power after 30 minutes. An L.E.D. on/off button turns green while the port is in use. Rubber covers protect the USB ports from dust and water.

Add to Project List
Add to quote
SKU: MAKADP001G Categories: , , Tags: , , , ,
  • Description
  • Features
  • XGT 40V | 80V SYSTEM
  • Video

Turn your Makita 40V max XGT Battery into a charging port with the 40V max XGT Cordless Power Source. Mount the ADP001G on to your compatible battery for two USB charging ports. Each USB port delivers 2.4A output. It automatically turns off the USB output power after 30 minutes. An L.E.D. on/off button turns green while the port is in use. Rubber covers protect the USB ports from dust and water.

XGT is a system of equipment, tools, batteries and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

SPEED : 2 USB ports provide quick and easy charging
POWER : 2.4A output from each USB port, 4.8A total output when both USB ports are connected
TECHNOLOGY : Auto-off turns off the USB output power after 30 minutes
CONVENIENCE : L.E.D. on/off button turns green while in use for operator convenience
INCLUDES : Power Source only

  • 2 USB ports provide quick and easy charging
  • 2.4A output from each USB port, 4.8A total output when both USB ports are connected
  • Auto-off turns off the USB output power after 30 minutes
  • Rubber covers protect USB ports from dust and water
  • L.E.D. on/off button turns green while in use for operator convenience
  • The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
  • The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
  • XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
  • XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
  • The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
  • The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
  • The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
  • Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
  • Only use genuine Makita® Batteries and Chargers
  • 3-year limited warranty

XGT® is a new 40V | 80V max system of cordless equipment and tools. XGT® outpowers, outsmarts, and outlasts the rest. Through Makita’s innovative engineering, the technology within XGT® will lead to creating the equipment and tools of the future.

GET A COMPLETELY CORDLESS JOBSITE
The LXT® System handles most applications, but for high-demand applications that use corded, gas or air, the XGT System delivers higher-powered solutions. With 40V max and 80V max XGT® Products, pros can fully experience a battery-powered job site.

RARE EARTH MAGNETS & PURE COPPER WIRE
Rare earth magnets of the highest quality are engineered within the brushless motors to maximize power and performance.
Makita® XGT Products feature purpose-built brushless motors with more copper windings for increased power output.

BUILT-IN MICROCHIPS & DIGITAL COMMUNICATION
Built-in microchips in both tool and battery allow for real-time digital communication, actively monitoring heat, overload, and over-discharge.
Digital communication between XGT Tools and Batteries through enhanced digital communication technology optimize performance to deliver up to 2X longer sustained power during demanding applications.

IMPACT ABSORBENT STRUCTURE & WATER AND DUST RESISTANCE
Durable outer casing and cell holder create space within the battery to absorb impact.
Water and dust-resistant triple layer structure and an enhanced terminal structure are engineered to protect against water and dust for any job site condition.

MULTI-LAYER SURFACE CONTACTS & RAPID OPTIMUM CHARGING SYSTEM
Multi-layer surface contacts within tool and battery are designed to take on high current demands.
XGT Charger and Dual Cooling Fans digitally communicates before and during the charging process, evaluating battery condition to deliver a consistent fast charge. It even charges 18V LXT Batteries with an adapter.

Related Products

  •
    Quick View

    Makita 5″ Angle Ginder with Paddle Switch

    Makita’s 5” SJS™ Angle Grinder combines 13 AMP power and variable speed, with paddle switch comfort and motor-protection features for longer-lasting industrial performance. The 9565PCV is engineered with Makita’s innovative SJS™ mechanical clutch system to protect the gears for longer tool life.

  •
    Quick View

    Makita 7″ Loop Handle Polisher

    Automotive detailers, marine enthusiasts and stone polishers rely on Makita polishers for high-quality detailing and polishing. The 7” Polisher Model 9237C combines consistent power and speed control with new durability and performance features. The result is a fast and powerful polisher for clear coat finishes, stone polishing, and more.

    Detailers will appreciate the variable speed dial and trigger so they can match the speed to the application, and the constant speed control is engineered to maintain consistent speed even under load. The 9237C has a rubberized loop handle that provides added comfort for users and added protection for delicate work surfaces. For increased durability, the Polisher has a wire mesh intake cover to prevent wool bonnet fibers and other debris from entering the motor.

  •
    Quick View

    Makita 4-1/2″ Paddle Swtch Grinder w/Cord

    Makita’s 4-1/2” Angle Grinder combines 7.5 AMP power with comfort and motor-protection features for longer-lasting industrial performance. The 9557PB Angle Grinder delivers 11,000 RPM, with soft start for smooth start-ups. The Angle Grinder also features a range of durability features including labyrinth construction which seals and protects the motor and bearings from dust and debris for longer tool life, as well as a protective zig-zig varnish engineered to seal the armature from dust and debris.

  •
    Quick View

    Makita 14″ Chain Saw Kit, LXT 18V X2 (36V)

    Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT® (36V) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.

    The XCU03PT has a 14” guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there’s no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a “tool-less” chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

    It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

    For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

  •
    Quick View

    Makita 3-1/2″ Framing Coil Nailer

    The Makita 3-1/2″ Framing Coil Nailer  combines power with less weight for increased performance and versatility. The AN902 weighs only 7.7 lbs. but drives 1-3/4″ to 3-1/2″ coil framing nails. Additional features include a “tool-less” depth adjustment engineered for more precise flush and countersink nailing and a contact mode trigger. The AN902 is ideal for framing, sheathing, fencing, decking and more.

  •
    Quick View

    Makita 5″ Angle Grinder with SJS Tech

    Makita’s 5” SJS™ Angle Grinder combines 13 AMP variable speed power with comfort and motor-protection features for longer-lasting stone grinding and polishing performance. The 9565CV is engineered with Makita’s innovative SJS™ mechanical clutch system to protect the gears for longer tool life.

    The 9565CV is a versatile and powerful grinder with variable speed, allowing the user to set the RPM to the material. The variable speed control feature makes the 9565CV ideal for stone work, including polishing and grinding.

  •
    Quick View

    Makita 13″ Jobsite Fan 3-Speed, 18V LXT

    The Makita 18V LXT® Lithium-Ion Cordless 13”Job Site Fan (DCF300Z) is another portable and powerful cordless solution for contractors. Up to 5.7 hours of portable air flow with the 18V LXT® Lithium-Ion 5.0 Ah battery makes this ideal for improved air circulation in close quarters, increased air flow for painters, and more. Three speed settings and an oscillation selector lets the user select optimal air velocity and control. For added convenience, the 3-stage automatic timer offers 1, 2 and 4-hour power-off selection. The fan has a durable design and the protective bumpers are engineered to withstand a job site environment.

  •
    Quick View

    Makita 2″ Brad Nailer 18 Gauge

    Makita’s 2-inch Brad Nailer features a durable and compact design with ease-of-use features including a narrow-nose design that make it ideal for a wide variety of finish applications.

    The AF505N can operate from 60 to 115 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch. The magazine capacity is up to 100 nails, with a quick release cam-lock to open the nail guide assembly to easily clear jams.

  •
    Quick View

    Makita 1-3/4″ Coil Roofing Nailer

    The Makita 1-3/4″ Roofing Coil Nailer combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter coil roofing nails, from 3/4” to 1-3/4” in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. 
    Ease-of-use features include a “tool-less” depth adjustment, engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

  •
    Quick View

    Makita Multi‑Tool Kit

    Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.

    Power and Performance

    The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding.

    The TM3010CX1 also features a range of comfort and convenience features including reduced vibration (6 m/s²) and lower noise (74dB), a small diameter barrel grip, and a large on/off slide switch with lock-on button. The “tool-less” clamp system provides easier removal and installation of accessories.

    The TM3010CX1 is engineered for a full range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class multi-tool.