Makita Rebar Cutter, 18V LXT

Makita 3/8” Angle Drill w/ Keyless Chuck, 18V LXT
Makita XGT 40V 1-9/16” Rotary Hammer, SDS-MAX

Makita Rebar Cutter, 18V LXT

Makita has delivered a cordless and spark-free cutting solution for rebar and steel rod with the 18V LXT® Brushless Cordless Rebar Cutter (model XCS04T1). The XCS04T1 has a cutting capacity of up to #5 (5/8”) rebar, with a cutting head that rotates a full 360 degrees. Get 233 cuts of #5 rebar with one 18V LXT® 5.0Ah Battery. It is an ideal solution for work away from a power source or in remote locations.

Add to Project List
Add to quote
SKU: MAKXCS04T1 Category: Tags: , , , , , , ,
  • Description
  • Features
  • ADDING OIL
  • Data Sheets & Downloads

Makita has delivered a cordless and spark-free cutting solution for rebar and steel rod with the 18V LXT® Brushless Cordless Rebar Cutter (model XCS04T1). The XCS04T1 has a cutting capacity of up to #5 (5/8”) rebar, with a cutting head that rotates a full 360 degrees. Get 233 cuts of #5 rebar with one 18V LXT® 5.0Ah Battery. It is an ideal solution for work away from a power source or in remote locations.

This rebar cutter comes with a carrying case to keep the tool clean when not in use. The case also has spaces for the accessories that come with the tool. These accessories include hex (Allen) wrenches, a spanner (open-end) wrench, hydraulic oil, and a set of replacement blades. The various wrenches are to be used to align and maintain the tool, open and close the return valve, replace the blades, and top up the hydraulic oil as needed (see the Adding Oil tab).

It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V lithium-ion batteries. Makita® 18V Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating.

PERFORMANCE : Spark free cutting of rebar and steel rod
POWER : Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently
DESIGN : Adjustable stopper holds the rebar at 90° to the cutting blade and assists with cutting stability
CONVENIENCE : Cutting head rotates 360° for different cutting positions
INCLUDES : (1) 18V LXT® Lithium-Ion 5.0 Ah battery, accesories, rapid charger and tool case

  • Performs up to 233 cuts of #5 rebar with one 18V LXT® 5.0Ah Battery
  • Cutting capacity range of 1/8"- 5/8"
  • Spark free cutting of rebar and steel rod
  • The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
  • Fast and effortless cutting speed of #5 rebar in 2.8 seconds
  • Adjustable stopper holds the rebar at 90° to the cutting blade and assists with cutting stability
  • Cutting head rotates 360° for different cutting positions
  • Accessory wrenches are for basic tool maintenance and blade replacement
  • Ergonomic pistol grip handle with rubberized soft grip provides increased comfort on the job
  • Built-in L.E.D. light illuminates the work area
  • Weighs only 15.2 lbs. with battery for reduced operator fatigue
  • On-board 3-stage L.E.D. gauge indicates battery charge level
  • The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
  • 18V LXT® Lithium-Ion 5.0Ah battery BL1850B, features an integrated L.E.D. battery charge level indicator
  • 18V LXT® Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45 minutes or less
  • Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
  • Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
  • Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger
  • Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
  • Only use genuine Makita batteries and chargers
  • 3-year limited warranty on tool, battery and charger

This Cordless Steel Rod Cutter is electro-hydraulic. When shipped from the factory, it was filled with oil. Do not attempt to add oil as long as the tool performs well. Over a period of time the oil level will gradually go down. Eventually this will cause a noticeable dropping off in performance. When this happens add oil as follows.

Safety Data Sheet

Product Instruction Manual

Related Products

  •
    Quick View

    Makita Subcompact Radio /Impact /Driver Kit, 18V LXT

    Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX301RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.

    The kit includes an ultra-compact 2-speed brushless driver-drill that weighs only 2.8 lbs., and a variable speed brushless impact driver that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes an 18V LXT® Job Site Radio with Bluetooth® and MP3 compatibility. The kit includes two 18V LXT® Compact 2.0Ah batteries, which feature an integrated L.E.D. battery charge level indicator.

  •
    Quick View

    Makita 2-1/2″ Coil Siding Nailer

    The Makita 2-1/2″ Siding Coil Nailer combines rugged construction with ease-of-use features for improved performance. The AN611 accepts 1-1/4” to 2-1/2” nails (.080 – .099 shank diameter) with a 300-400 magazine capacity and an easy-loading canister with nail size adjustment. The AN611 has a 3-mode selector switch (contact, sequential, lock) that is engineered for increased user control and convenience. Additional features include a “tool-less” depth adjustment with 9 depth settings, and sharp spurs that grip the wood for increased control at an angle.

  •
    Quick View

    Makita 14″ Chain Saw Kit, LXT 18V X2 (36V)

    Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT® (36V) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.

    The XCU03PT has a 14” guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there’s no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a “tool-less” chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

    It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

    For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

  •
    Quick View

    Makita 2.6 Gallon Pressurized Water Tank

    The Makita 2.6 Gallon Pressuriezed Water Tank is designed to be used with gas power saws, while making cuts in masonry materials with a wet-use diamond blade. Each tank is made of durable, lightweight poly-carbonate for added durability and a long life. The large 2.6 gallon capacity means less frequent refills and reduced downtime.

  •
    Quick View

    Makita 1-3/4″ Coil Roofing Nailer

    The Makita 1-3/4″ Roofing Coil Nailer combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter coil roofing nails, from 3/4” to 1-3/4” in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. 
    Ease-of-use features include a “tool-less” depth adjustment, engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

  •
    Quick View

    Makita Multi‑Tool Kit

    Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.

    Power and Performance

    The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding.

    The TM3010CX1 also features a range of comfort and convenience features including reduced vibration (6 m/s²) and lower noise (74dB), a small diameter barrel grip, and a large on/off slide switch with lock-on button. The “tool-less” clamp system provides easier removal and installation of accessories.

    The TM3010CX1 is engineered for a full range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class multi-tool.

  •
    Quick View

    Makita 7-1/4″ Magnesium Circular Saw

    The Makita 5007MG 7-1/4 in. Magnesium Circular Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor. The 5007MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market. A built-in dust blower clears the line of cut for more accurate and precise cuts.

    The 5007MG is built for framing walls, floors and roofs using a range of dimensional lumber and dense engineered lumber, including LVL, PSL and I-Joists, headers, and microlams; as well as ripping panels such as plywood, OSB, particle board, and dense structural panels. Other applications include plunge and bevel cutting.

  •
    Quick View

    Makita 2″ Brad Nailer 18 Gauge

    Makita’s 2-inch Brad Nailer features a durable and compact design with ease-of-use features including a narrow-nose design that make it ideal for a wide variety of finish applications.

    The AF505N can operate from 60 to 115 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch. The magazine capacity is up to 100 nails, with a quick release cam-lock to open the nail guide assembly to easily clear jams.

  •
    Quick View

    Makita 3-1/2″ Stick Framing Nailer

    The 21º Full Round Head 3-1/2″ Framing Nailer combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing/siding, and sub-flooring. It is ideal for framers, roofers and carpenters.

  •
    Quick View

    Makita 5″ Random Orbit Sander, 12,000 OPM

    Makita’s 5-Inch Random Orbit Sander delivers fast, smooth performance with better grip and control. The BO5030 is ideal for woodworkers and finish carpenters who require a best-in-class random orbit sander. It features a pad control system for controlled pad speed upon start up, with a powerful 3 AMP motor for continuous operation, 1/8-inch random orbit action, and 12,000 OPM for fast and smooth sanding. The BO5030 is precision engineered with all ball bearing construction for longer tool life.