Makita Heat Gun
The Makita Variable Speed Heat Gun (HG6031VK) is engineered for industrial applications and is ideal for a wide range of applications including vehicle wraps and tinting, stripping lacquer, paint and varnish, thawing frozen pipes, loosening tile and putty, re-melting adhesive, removing stickers, waxing and de-waxing, bending plastic pipes and sheets, and more. The HG6031VK features precise temperature control with a variable temperature control dial (122° – 1,022° F) and 9 numbered settings, as well as two air flow settings (7 and 14 CFM) so the user can set the heat and blower speed to the application.
- Description
- Features
- Accessories
The Makita Variable Speed Heat Gun (HG6031VK) is engineered for industrial applications and is ideal for a wide range of applications including vehicle wraps and tinting, stripping lacquer, paint and varnish, thawing frozen pipes, loosening tile and putty, re-melting adhesive, removing stickers, waxing and de-waxing, bending plastic pipes and sheets, and more. The HG6031VK features precise temperature control with a variable temperature control dial (122° - 1,022° F) and 9 numbered settings, as well as two air flow settings (7 and 14 CFM) so the user can set the heat and blower speed to the application.
The HG6031VK has a compact design (only 1.5 lbs.) with a rubberized pistol grip handle. For added convenience during nozzle changes (nozzles sold separately), the integrated rear stand supports the gun in the "up" position. Added features include a built-in tether notch (tether sold separately), overheat protection, and a 6.6 ft. cord for maneuverability. The HG6031VK includes a tool case.
PRECISION : Variable temperature control dial (122 - 1,022°F) for precise control over a variety of applications
VERSATILITY : Slide switch sets two air flow settings (7 and 14 CFM) for greater versatility
DESIGN : Rubberized handle and integrated rear stand
CONVENIENCE : Built-in tether notch (tether sold separately)
INCLUDES : Tool case
- Variable temperature control dial (122 - 1,022°F) with 9 settings for precise control over a wide variety of applications
- Slide switch sets two air flow settings (7 and 14 CFM) for greater versatility
- Compact 1.5 lb. design features a rubberized pistol grip handle and an integrated rear stand
- Ideal for vehicle wraps and tinting, stripping lacquer, paint and varnish, thawing frozen pipes, loosening tile and putty, re-melting adhesive, removing stickers, waxing and de-waxing, bending plastic pipes and sheets, and more
- Compatible with various nozzle accessories for increased versatility (accessories sold separately)
- Built-in tether notch (tether sold separately)
- Overheat protection prolongs tools life
- 6.6 ft. cord length for maneuverability
- 1-year limited warranty
- Includes a tool case
The following accessories are available for the Makita HG6031VK Heat Gun. They fit over the 1-3/8" nozzle of the heat gun, and are useful in a wide variety of tasks.
1-3/8" Glass Protection Nozzle (#028)
1-3/8" Wide-Slot Nozzle (#029)
1-3/8" Reflector Nozzle (#030)
1-3/8" Reduction Nozzle (#031)
1-3/8" Overlap Welding Nozzle (#032)
1-3/8" Solder Sleeve Reflector Nozzle (#033)
1-3/8" Welding Nozzle (#034)
Two Channel Speed Welding Nozzle (#039)
Welding Rods, ABS/HDPE/PP Plastics
Scrapers and Pressure Rollers
Related Products
-
Makita 1/2″ Angle Drill w/Cord
Tackle hard-to-reach plumbing work with the Makita 1/2 in. Right Angle Drill (model DA4031). The drill can handle steel up to 1/2 in. thick and wood up to 4-5/8 in. at difficult angles with its Sidewinder handle that rotates 90 degrees left or right. The powerful 10 Amp motor offers precise variable speed control across 2 ranges, 0 – 1,200 RPM and 0 – 300 RPM. Additional features include an adjustable top handle and an ergonomic rubberized grip.
-
Makita 7″ Compact Jobsite Fan, 18V LXT
The Makita 18V max LXT® Lithium-Ion Cordless 7-1/8” Fan is a portable and convenient air-moving solution for painters, contractors, and more.
The fan has three speed settings and an oscillation selector for optimal air velocity and control. Added features include tilt-settings for better direction of air flow, and an adjustable hook for easy handling and hanging. The 3-stage automatic timer has 1-hour, 2-hour and 4-hour power-off selection. -
Makita 13″ Jobsite Fan 3-Speed, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless 13”Job Site Fan (DCF300Z) is another portable and powerful cordless solution for contractors. Up to 5.7 hours of portable air flow with the 18V LXT® Lithium-Ion 5.0 Ah battery makes this ideal for improved air circulation in close quarters, increased air flow for painters, and more. Three speed settings and an oscillation selector lets the user select optimal air velocity and control. For added convenience, the 3-stage automatic timer offers 1, 2 and 4-hour power-off selection. The fan has a durable design and the protective bumpers are engineered to withstand a job site environment.
-
Makita 3-1/2″ Framing Coil Nailer
The Makita 3-1/2″ Framing Coil Nailer combines power with less weight for increased performance and versatility. The AN902 weighs only 7.7 lbs. but drives 1-3/4″ to 3-1/2″ coil framing nails. Additional features include a “tool-less” depth adjustment engineered for more precise flush and countersink nailing and a contact mode trigger. The AN902 is ideal for framing, sheathing, fencing, decking and more.
-
Makita 14″ Chain Saw Kit, LXT 18V X2 (36V)
Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT® (36V) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.
The XCU03PT has a 14” guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there’s no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a “tool-less” chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.
It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
-
Makita Subcompact Radio /Impact /Driver Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX301RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless driver-drill that weighs only 2.8 lbs., and a variable speed brushless impact driver that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes an 18V LXT® Job Site Radio with Bluetooth® and MP3 compatibility. The kit includes two 18V LXT® Compact 2.0Ah batteries, which feature an integrated L.E.D. battery charge level indicator.
-
Makita 10″ Table Saw with Stand
Makita’s 10” Contractor Table Saw with Portable Stand is a versatile and powerful table saw for use in the shop or on the jobsite. It combines a range of convenience and ease-of-use features with large capacity and 15 AMP power, making it a true best-in-class table saw for a range of professional applications. The portable stand is jobsite tough for easy transport.
The 2705X1 is a versatile and powerful table saw for use in the shop or on the job site. It’s engineered for remodelers, furniture makers, finish carpenters, cabinet installers, decking and flooring contractors, and general contractors seeking a best-in-class 10” Contractor table saw for the jobsite or on the benchtop. -
Makita 2″ Brad Nailer 18 Gauge
Makita’s 2-inch Brad Nailer features a durable and compact design with ease-of-use features including a narrow-nose design that make it ideal for a wide variety of finish applications.
The AF505N can operate from 60 to 115 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch. The magazine capacity is up to 100 nails, with a quick release cam-lock to open the nail guide assembly to easily clear jams. -
Makita 7-1/4″ Magnesium Circular Saw
The Makita 5007MG 7-1/4 in. Magnesium Circular Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor. The 5007MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market. A built-in dust blower clears the line of cut for more accurate and precise cuts.
The 5007MG is built for framing walls, floors and roofs using a range of dimensional lumber and dense engineered lumber, including LVL, PSL and I-Joists, headers, and microlams; as well as ripping panels such as plywood, OSB, particle board, and dense structural panels. Other applications include plunge and bevel cutting. -
Makita 5″ Random Orbit Sander, Variable Speed
Makita’s 5-Inch Random Orbit Sander with variable speed combines power, speed and performance with improved grip and control, including an innovative adjustable front handle. The large 1/8-inch random orbit action delivers fast and smooth sanding and a swirl-free finish, with a pad control system for controlled pad speed upon start-up. The rubberized palm grip and top handle fit like a glove with even pressure and easy control. It is ideal for woodworkers, finish carpenters and general contractors.