LY1-2 Series Masonry Circular Saw Blades
The LY1-2 Series made in USA economy grade Wet/Dry cutting .472″ laser welded 14″ masonry cutting blade.
- Description
Description
- LY1-2 SERIES (USA BLADE)
- ECONOMY GRADE
- WET/DRY CUTTING.472″ (12MM)
- SEGMENT HEIGHT (.394″/10MM DIAMOND DEPTH)
- LASER WELDED IN IRVINE, CALIFORNIA
- APPLICATION(S)-CURED CONCRETE-MASONRY
Related Products
-
Hot

Quick ViewThunderTwist SDS Drill Bits
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions. -
TCT X165 Heavy Duty Blade
Diamond X165: Heavy duty special diamond blade only to be used for cutting cast iron and ductile pipes.
-
Mag-Bit 2 Oz. Cutting Fluid, Concentrated
For use with many Mag-Bit cutting bits and blades.
Highly concentrated. Recommended Dilution of 20:1 for all tasks.
2 oz bottle makes 1.56 gallons of cutting fluid.
Excellent rust control on all metals; No in-process rust or rework.
Low foaming, low misting, water soluble.
Non-nitrited, non-halogenated, non-silicones or silicate, non-phenolic.
Rated insignificant under NFPA hazard rating for both fire and health. -
Impactech Magnetic Nutsetter Hex Bit

Made from S2 modified shock resistant steel for professional performance and durability. Featuring a patented spiral torsion zone absorbs impact and extends bit life. Proprietary precision CNC machined tips for excellent fit in fastener recess. Tested to outperform all leading brands in lifecycle and tip failure testing. Made with a high strength industrial magnet for securing your bits.
-
Mag-Bit Reciprocating Saw Blades
Bi-Metal with Cobalt outlasts standard blades. Faster cutting and longer lasting in independent testing. MAG-BIT Progressive blade cuts both thick and thin material. Replaces many combinations of blades.
When cutting metals, use a cutting compound such as MAG-LUBE concentrated cutting fluid.
-
Impactech Phillips Insert and Power Bits

Made from S2 modified shock resistant steel for professional performance and durability. Featuring a patented spiral torsion zone absorbs impact and extends bit life. Proprietary precision CNC machined tips for excellent fit in fastener recess. Tested to outperform all leading brands in lifecycle and tip failure testing. -

Read MoreQuick ViewTungsten Carbide Tipped Hole Cutters
If you need to cut through the toughest materials, these tungsten carbide tipped hole cutters are the perfect solution. Whether it is stainless steel, cast iron, high density resin, or metal plate and sheet metal, these cutters get the job done.
They cut up to 3/16″ deep (4″ bit cuts up to 1″ deep), and have a spring included around the pilot bit to eject the slug. Sizes from 11/16″ to 2″ have a 7/16″ shank, and above that have a 1/2″ shank.
Each hole cutter comes with a pilot bit, and replacement bits are available.
The 4-piece kit contains the 7/8″, 1-1/8″, and 1-3/8″ cutters, plus the pilot bit. -
TCT P165 Blade for Plastics
TCT P165: Blade with tungsten carbide tips only for cutting plastic pipes. TCT blades can be sharpened a couple of times so they will become like new.
-
Spade Drill Bits
Spade bits are used for rough boring in wood. Spade bits are flat, with a centering point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. Intended for high speed use, they are used with electric hand drills. Spade bits are also sometimes referred to as “paddle bits”. Available in 1/4″ – 1-1/2″.
-

Read MoreQuick ViewPilot Drill Bits for Hole Saw Arbors
As you use your hole saw blades, the pilot bit in the arbor will eventually wear out. Rather than buying a full replacement arbor, you can just buy a new pilot bit and replace the old bit.
These pilot bits are made from High Speed Steel (HSS), and fit all hole saw arbors. They are available in lengths of 3″ and 4″. There is even a carbide tipped 4″ bit available if you need extra cutting power.











