Finished Hex Nuts – Grade 5
Grade 5 hex nuts have internal machine threads, for use with machine thread bolts and screws. The most versatile and widely used nut. ANSI B1.1 UNC and UNF Class 2B thread requirement. Zinc plating, retards the corrosion rate in a normal atmosphere.
- Description
- Sizes
- Tech Specs
- Downloads
Description
Hexagonal shaped nuts with internal screw threads. Finished hex nuts are one of the most common nuts used. Hex nuts have internal machine threads, for use with machine thread bolts and screws. The most versatile and widely used nut. ANSI B1.1 UNC and UNF Class 2B thread requirement. Grade 5. Zinc plating, retards the corrosion rate in a normal atmosphere.
Nut size (A.K.A. diameter) is the size bolt that the nut is used with. The same is true of the thread count. Thus a 1/4″-20 nut fits a 1/4″-20 bolt.
NOTE: Image not to scale
Please select Thread and Diameter
Technical specifications and diagrams like shear and tensile straight ratings go here.
- Finish: Zinc
- Grade: 5
- Material: Steel
- Specification: SAE J995
View Technical Specs: NONE
View Certification Info: NONE
Related Products
-
Hot
Quick ViewFinished Hex Nuts – Grade 8: Yellow Zinc
Grade 8 hex nuts have internal machine threads, for use with machine thread bolts and screws. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than that of clear zinc.
-
Read MoreQuick View
Sheet Metal Screws
Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.
-
Read MoreQuick View
Sheet Metal Screws – Slotted, Oval, Stainless Steel 18-8
Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.
-
Read MoreQuick View
Machine Screws – Phillips, Flat, Zinc Plated
Machine screws are meant to hold two metal work pieces together, with the use of a threaded pre-tapped hole, or through a hole and held with a nut. They are threaded the entire length of the shank. For most styles of a machine screw, the length is measured from under the head to the end of the screw. For flat head machine screws, since they are intended to fit into a countersunk hole, their length is measured from the top of the screw head to the end of the screw.
-
HotQuick View
Carriage Bolts: Zinc Plated Steel
Carriage heads are large smooth and domed with no drive. A low carbon steel for general use. Zinc plated for moderate corrosion resistance.
-
Read MoreQuick View
Sheet Metal Screws – Phillips, Oval, Stainless Steel
Sheet metal screws, a type of self-tapping screw, have threads down the entire length of the shank for tapping and fastening thin material. The point style determines the type of material the screw can be used on, such as metal, wood, or plastic. These screws commonly have a sharp point that helps penetrate the material.
-
Read MoreQuick View
Plow Bolts
Plow bolts feature a countersunk, flat head, square neck, and unified thread pitch. They are commonly used in road graders, scoop shovels, and other heavy-duty industrial equipment where a flat, smooth surface is required. Grade-5 plow bolts are made from a medium-grade, heat-treated carbon steel, and have a plain finish.
-
HotQuick View
Finished Hex Nuts – Stainless Steel
Stainless steel hex nuts have internal machine threads, for use with machine thread bolts and screws. Stainless steel is a versatile material offering corrosion resistance, strength, good pricing, and a wide range of shapes.
-
Read MoreQuick View
Machine Screws
Machine screws are meant to hold two metal work pieces together, with the use of a threaded pre-tapped hole, or through a hole and held with a nut. They are threaded the entire length of the shank. For most styles of a machine screw, the length is measured from under the head to the end of the screw. For flat head machine screws, since they are intended to fit into a countersunk hole, their length is measured from the top of the screw head to the end of the screw.
-
Read MoreQuick View
Machine Screws – Combo, Truss, Zinc Plated
Machine screws are meant to hold two metal work pieces together, with the use of a threaded pre-tapped hole, or through a hole and held with a nut. They are threaded the entire length of the shank. For most styles of a machine screw, the length is measured from under the head to the end of the screw. For flat head machine screws, since they are intended to fit into a countersunk hole, their length is measured from the top of the screw head to the end of the screw.
