Makita XGT 80V MAX 2″ Rotary Hammer, SDS-MAX

Additional information

The 80V max (40V max X2) XGT® Brushless 2” AVT® Rotary Hammer (GRH06) is a cordless concrete solution designed for heavy-load applications. It delivers the power, speed, and run-time for corded demands, without the cord.

The GRH06 is powered by two 40V max lithium-ion batteries, with an 80V brushless motor that delivers up to 27% faster drilling performance than an equivalent corded model. This hard-hitting performance is combined with advanced comfort and convenience features including Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if rotation of bit is suddenly forced to stop. It is also equipped with Anti-Vibration Technology (AVT®) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. In addition, the vibration-absorbing back handle and side handle are engineered to further reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance.

For added efficiency, the GRH06 is equipped with Auto-Start Wireless System (AWS®), which uses Bluetooth® technology for wireless power-on and power-off communication between the equipped tool and dust extractor (sold separately). Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This increases productivity on a single charge and reduces continuous noise at the job or work site.

Constant speed control automatically applies additional power under load for optimum performance. The torque limiting clutch is engineered to prevent gear damage by automatically disengaging the gears if the bit binds, and constant speed control automatically adds power to the motor to maintain speed under load to complete the most demanding jobs.

Additional performance features include an electric brake, variable speed dial, built-in L.E.D. light, a soft-start to suppress start-up reaction, and Soft No-load function that automatically reduces the speed of the motor when idling.

It has 2-modes of operation - "Hammering with Rotation" or "Hammering Only". The GRH06 is ideal for a range of trades including mechanical/electrical/plumbing contractors, concrete contractors, road and bridge contractors, utility workers, pest control, maintenance operations, and more. It accepts SDS-MAX bits.

XGT is a system of equipment, tools, batteries and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

PERFORMANCE : Brushless motor and two 40V max XGT® batteries combine to deliver the power for heavy applications
CONTROL : AFT® electronically turns off the motor if rotation of bit is suddenly forced to stop
COMFORT : AVT® is a counterbalance system along with vibration-absorbing handles that work to reduce vibration
DUST MANAGEMENT : AWS® Capable for wireless power-on/off communication between tool and extractor

GRH06Z INCLUDES : Tool, side handle, grease, towel
GRH06PM INCLUDES : Tool, (2) 40V max XGT® Lithium-Ion 4.0Ah batteries, dual port rapid charger, side handle, grease, towel, batteries, dual port charger, tool case

• OUTPOWER: Makita-built brushless motor along with two 40V max XGT® batteries combine to deliver up to 27% faster drilling performance than corded equivalent model*
• OUTSMART: Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
• OUTLAST: Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
• Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
• Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
• Electric brake allows the tool to be repositioned faster for maximum productivity
• Dust extraction capability with optional Makita Dust Attachment Kit
• Constant speed control automatically applies additional power under load for optimum performance
• Soft start suppresses start-up reaction for more precision and better accuracy
• "Soft no-load" function automatically reduces the speed of the motor when idling to help increase tool life and performance
• Built-in L.E.D. light with an independent on/off switch illuminates the work area
• Variable speed dial enables the operator to match the speed to the application
• Large Multi-finger power trigger for increased comfort during extended use
• 2-mode operation for "Hammering with Rotation" or "Hammering Only" for increased versatility
• Multiple bit angle settings allows the steel/bit to be set at different positions for operating convenience
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears during a bind-up situation
• The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
• The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
• XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
• XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
• The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
• The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
• The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
• Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
• Only use genuine Makita batteries and chargers
• 3-year limited warranty on tool, battery, and charger

*Compared to equivalent corded model HR5212C

A NEW SYSTEM OF EQUIPMENT & TOOLS
XGT® is a new 40V | 80V max system of cordless equipment and tools. XGT® outpowers, outsmarts, and outlasts the rest. Through Makita’s innovative engineering, the technology within XGT® will lead to creating the equipment and tools of the future.

GET A COMPLETELY CORDLESS JOBSITE
The LXT® System handles most applications, but for high-demand applications that use corded, gas or air, the XGT System delivers higher-powered solutions. With 40V max and 80V max XGT® Products, pros can fully experience a battery-powered job site.

RARE EARTH MAGNETS & PURE COPPER WIRE
Rare earth magnets of the highest quality are engineered within the brushless motors to maximize power and performance.
Makita® XGT Products feature purpose-built brushless motors with more copper windings for increased power output.

BUILT-IN MICROCHIPS & DIGITAL COMMUNICATION
Built-in microchips in both tool and battery allow for real-time digital communication, actively monitoring heat, overload, and over-discharge.
Digital communication between XGT Tools and Batteries through enhanced digital communication technology optimize performance to deliver up to 2X longer sustained power during demanding applications.

IMPACT ABSORBENT STRUCTURE & WATER AND DUST RESISTANCE
Durable outer casing and cell holder create space within the battery to absorb impact.
Water and dust-resistant triple layer structure and an enhanced terminal structure are engineered to protect against water and dust for any job site condition.

MULTI-LAYER SURFACE CONTACTS & RAPID OPTIMUM CHARGING SYSTEM
Multi-layer surface contacts within tool and battery are designed to take on high current demands.
XGT Charger and Dual Cooling Fans digitally communicates before and during the charging process, evaluating battery condition to deliver a consistent fast charge. It even charges 18V LXT Batteries with an adapter.