Makita 16 Gauge Nibbler, 18V LXT
The 18V LXT® Lithium-Ion Cordless 16 Gauge Nibbler (XNJ01) provides contractors with another 18V LXT® metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.
The XNJ01Z is powered by a Makita-built motor that delivers 1,900 strokes-per-minute (SPM) for fast and smooth cutting. The die holder rotates 360° to meet the demands of the cutting direction, with a cutting radius of 1-3/4” (inner edge) and 2” (outer edge). When cutting, the metal chips are conveniently disposed below the cutting material, which helps prevent damage to the work surface.
- Description
- Features
The 18V LXT® Lithium-Ion Cordless 16 Gauge Nibbler (XNJ01) provides contractors with another 18V LXT® metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.
The XNJ01Z is powered by a Makita-built motor that delivers 1,900 strokes-per-minute (SPM) for fast and smooth cutting. The die holder rotates 360° to meet the demands of the cutting direction, with a cutting radius of 1-3/4” (inner edge) and 2” (outer edge). When cutting, the metal chips are conveniently disposed below the cutting material, which helps prevent damage to the work surface.
PERFORMANCE : Makita-built motor delivers 1,900 SPM
CAPACITY : Ideal for cutting roofing sheet metal at thicknesses up to 16 gauge
VERSATILITY : Die holder rotates 360° to meet demands of cutting direction
CONVENIENCE : Convenient chip disposal is below cutting material to minimize damage to cutting surface
INCLUDES : Tool only
- Makita-built motor delivers 1,900 SPM for faster and smooth cutting
- Ideal for cutting roofing sheet metal at thicknesses up to 16 gauge
- Die holder rotates 360° to meet demands of cutting direction
- Convenient chip disposal is below cutting material to minimize damage to cutting surface
- Cutting radius: inner edge 1-3/4”; outer edge 2”
- Anti-restart protection prevents motor start up when battery is inserted with switch locked on
- Rubberized soft grip for improved comfort
- Lock-on sliding switch for continuous operation
- Built-in thickness gauge for convenience
- Externally accessible carbon brushes for greater serviceability
- Easy punch and die replacement for reduced down time on the job
- 3-year limited warranty
Related Products
-
Quick ViewMakita 7-1/4″ Magnesium Circular Saw
The Makita 5007MG 7-1/4 in. Magnesium Circular Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor. The 5007MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market. A built-in dust blower clears the line of cut for more accurate and precise cuts.
The 5007MG is built for framing walls, floors and roofs using a range of dimensional lumber and dense engineered lumber, including LVL, PSL and I-Joists, headers, and microlams; as well as ripping panels such as plywood, OSB, particle board, and dense structural panels. Other applications include plunge and bevel cutting. -
Quick View
Makita 3-1/2″ Stick Framing Nailer
The 21º Full Round Head 3-1/2″ Framing Nailer combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing/siding, and sub-flooring. It is ideal for framers, roofers and carpenters.
-
Quick View
Makita 10.1 Oz Cartridge Holder
This 360° rotatable cartridge holder fits 10 oz. and 300 ml cartridges, and includes all you need to utilize 10oz. cartridge style containers. It is made of lightweight, high quality material.
-
Quick View
Makita 4-3/4″ Portable Band Saw
The Makita Portable Band Saw model 2107FZ is a compact and versatile solution for metal cutting including pipe, Unistrut®, all-thread, angle-iron, and more.
The 2107FZ is powered by a 6.5 AMP motor and delivers 200-350 ft./min., with a variable speed control dial that allows the user to match the speed to the application. Additional features include a blade tightening lever for fast and easy blade installation, dual ball bearing guides for precision cutting, and a built-in high-output fluorescent light to illuminate the cutting area. It’s engineered with a no lock-on feature, so the saw turns off when the switch is released.
-
Quick View
Makita 7-1/4″ Circular Saw
Makita engineered the 7-1/4” Circular Saw (model 5007F) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, and job site durability. The 5007F is ideal for a range of framing and cutting applications.
The 5007F is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4” circular saw. -
Quick View
Makita Subcompact Impact /Hammer Drill Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX202RB is a combo kit with two 18V Sub-Compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless hammer driver-drill with two speed settings that weighs only 2.8 lbs. The percussive hammer-drill setting allows for drilling into masonry and brick. The variable speed brushless impact driver has two speed settings and weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries,which feature an integrated L.E.D. battery charge level indicator.
-
Quick View
Makita 10″ Table Saw with Stand
Makita’s 10” Contractor Table Saw with Portable Stand is a versatile and powerful table saw for use in the shop or on the jobsite. It combines a range of convenience and ease-of-use features with large capacity and 15 AMP power, making it a true best-in-class table saw for a range of professional applications. The portable stand is jobsite tough for easy transport.
The 2705X1 is a versatile and powerful table saw for use in the shop or on the job site. It’s engineered for remodelers, furniture makers, finish carpenters, cabinet installers, decking and flooring contractors, and general contractors seeking a best-in-class 10” Contractor table saw for the jobsite or on the benchtop. -
Quick View
Makita 3/4″ Impact Wrench w/ Friction Ring Anvil
Makita 6906 9 Amp 3/4-in Impact Wrench has a 9 AMP motor and 433 ft.lbs. of Max Torque for industrial applications like automotive or stubborn/stuck bolts. The 6906 has precision gearing plus ball and needle bearing construction for smooth and efficient power transmission. The rocker switch is designed for quickly switching from forward to reverse. The 6906 also includes a steel case and side handle.
-
Quick View
Makita 5″ Random Orbit Sander, Variable Speed
Makita’s 5-Inch Random Orbit Sander with variable speed combines power, speed and performance with improved grip and control, including an innovative adjustable front handle. The large 1/8-inch random orbit action delivers fast and smooth sanding and a swirl-free finish, with a pad control system for controlled pad speed upon start-up. The rubberized palm grip and top handle fit like a glove with even pressure and easy control. It is ideal for woodworkers, finish carpenters and general contractors.
-
Quick View
Makita 7″ Compact Jobsite Fan, 18V LXT
The Makita 18V max LXT® Lithium-Ion Cordless 7-1/8” Fan is a portable and convenient air-moving solution for painters, contractors, and more.
The fan has three speed settings and an oscillation selector for optimal air velocity and control. Added features include tilt-settings for better direction of air flow, and an adjustable hook for easy handling and hanging. The 3-stage automatic timer has 1-hour, 2-hour and 4-hour power-off selection.
