Strut, 1-5/8″, 12GA Heavy Duty, Slotted
Strut channel, often referred to as Unistrut, is used for light structural support, often for supporting wiring, plumbing, or mechanical components such as air conditioning or ventilation systems.
This version is made from 12 gauge steel, for heavy duty applications.
- Description
- Strut Options
Strut channel, often referred to as Unistrut, is used for light structural support, often for supporting wiring, plumbing, or mechanical components such as air conditioning or ventilation systems.
This version is made from 12 gauge steel, for heavy duty applications.
13/16" X 1-5/8" X 10', 14GA, Slots on 2" Centers
13/16" X 1-5/8" X 20', 14GA, Slots on 2" Centers
13/16" X 1-5/8" X 10', 14GA, Slots on 2" Centers, HDG
13/16" X 1-5/8" X 10', 14GA, Slots on 2" Centers, Stainless Steel
1-5/8" X 1-5/8" X 10', 14GA, Slots on 2" Centers
1-5/8" X 1-5/8" X 20', 14GA, Slots on 2" Centers
1-5/8" X 1-5/8" X 10', 14GA, Slots on 2" Centers, HDG
1-5/8" X 1-5/8" X 10', 12GA Heavy Duty, Slots on 2" Centers
1-5/8" X 1-5/8" X 10', 14GA, Slots on 2" Centers, Stainless Steel
1-5/8" X 1-5/8" X 10', 12GA Heavy Duty, Slots on 2" Centers, Stainless Steel
Related Products
-
Quick ViewConcrete Insert Box, Ceiling, Galvanized
The concrete insert box is designed to allow attachment of threaded rod in a ceiling, and is installed before the cement is poured into the wooden form. Once the cement hardens, and the form is removed, the knockout plate is removed and a concrete insert nut is placed inside. The threaded rod is then screwed into the nut, providing support for equipment to be mounted to.
This version of this equipment is galvanized, and can be used in interior or exterior placements. -
Quick View4-Hole Open Angle Connector
This connector is used for connecting two piece of strut, at an open 45° angle, also called 135° angle.
-
Read MoreQuick ViewClevis Pipe Hanger, Stainless Steel
A clevis hanger is a pipe attachment providing vertical adjustment, consisting of a clevis type top bolted to a formed steel bottom strap. They are recommended for the suspension of non-insulated, stationary pipe lines. This clevis hanger is made from stainless steel, giving it superb rust resistance. It is suitable for any interior use, as well as exterior use.
-
Quick ViewStandard Riser Clamps (6200-6300)
Model 6200-6300 Standard Riser Clamps from Elite components are designed for standard iron pipe. They are available in either galvanized or plain and in sizes from 1/2″ thru 24″.
Compares with federal specifications A-A-1192A (Type 8) and ANSI/SP-69 and SP-58 (Type 8)
-
Read MoreQuick ViewClevis Pipe Hanger, Galvanized
A clevis hanger is a pipe attachment providing vertical adjustment, consisting of a clevis type top bolted to a formed steel bottom strap. They are recommended for the suspension of non-insulated, stationary pipe lines. These hangers have been given an electroplated galvanized finish which provides general rust resistance, and are suitable for any interior uses.
-
Read MoreQuick ViewConcrete Insert Nut
The concrete insert nut is specifically made to fit inside a concrete insert box, which was embedded in the cement ceiling when it was poured. The insert nut allows threaded rod to be suspended, for the mounting of equipment.
-
Quick ViewElite Loop Hanger
Elite Loop Hangers are the recommended pipe support solution for the suspension of stationary non-insulated pipe lines.
-
Quick View3/8″ Weldless Eye Nut
Weldless steel eye nuts are threaded fasteners with a looped head that is used to secure hooks or other devices used to hang equipment from threaded rod.
-
Quick ViewElite Beam Clamp
Elite Beam Clamps are used as structural attachments to the top or bottom of metal beams, purlins, channel, or angle iron.
-
Quick View7-Hole Universal Shelf Bracket
This plate connector can be used to secure a piece of strut 90° to another, or to place a protruding shelf onto strut
