Rize Zip-Clip w/10 Ft Looped Cable, for Installation of Unistrut
The new Zip-Clip cable lock allows for installation of unistrut and cable trays. the ZipClip has a load capacity of 220lbs.
- Description
The new Zip-Clip cable lock allows for installation of unistrut and cable trays. the ZipClip has a load capacity of 220lbs.
Related Products
-
Read MoreQuick View
Malleable Wire Rope Clip, Galvanized
Wire rope clips are fittings used to make an eye or join two cable or wire rope ends together. This design of wire rope clip is available to handle wire rope or strand sizes ranging from 1/16″ – 1-1/8″. Malleable wire rope clips are used in light duty & general purpose applications. Each malleable wire rope clip is zinc plated.
-
Read MoreQuick View
Eye Bolt, Turned, 304 Stainless Steel
Wire eye bolts are intended for light duty applications such as, tie-downs and wire guiding. These eye bolts are also referred to as bent or turned eye bolts. Do not use them for lifting.Turned eye bolts are manufactured from low carbon cold drawn steel wire and are supplied with NC rolled machine threads with one hex nut unassembled.Eye bolts feature a closed loop design that secures cables and chains in order to support the weight of heavy hanging objects such as plumbing pipes and wires.
-
Read MoreQuick View
Eye Bolt, Drop Forged, Stainless Steel
Drop forged eye bolts are high strength bolts for heavy duty applications. Eye bolts provide a method for anchoring chain and wire rope to a fixed surface such as wood, metal, concrete, etc. Forged Stainless steel material is extra strong and recommended for exterior applications.
-
Read MoreQuick View
Wire Rope Clip, Drop Forged, Heavy Duty, HDG
A wire rope clip, sometimes called a clamp, is used to fix the loose end of the loop back to the wire rope. It consists of a U-shaped bolt, a forged saddle, and two nuts.
-
Rize RWC4 X 15 Ft Looped Cable
The Rize Looped Cable enhances the Kwik-Loc suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the job site.
-
Read MoreQuick View
Wire Rope Sleeves, Aluminum
A wire rope sleeve is used to terminate a cable, or join two cables together. When properly applied to 7×7, 7×19 or 6×19 IWRC classification wire rope, the aluminum sleeve eye-splice termination provides a secured connection equal to the breaking strength of the wire rope. This process is also called swaging.
-
Rize RWC3 & KL100 Starter Kit w/Counter Lid & Bucket
Rize Starter Kits include everything you need to get started and finished early on the job.
Kit includes:
1 Roll Cable, RWC3 rated at 150lb loads
100 Kwik-Locs, KL100
1 Bucket with Cable Counter in Lid
1 Rize Cable Cutter -
Read MoreQuick View
Rapid Quick Link, Zinc
Quick links feature a threaded end and barrel screw that allow them to be dependable and convenient. The threaded link requires no tools for tightening or loosening, though it does feature a hex shape that can accept a wrench for an extra tight hold.
Available sizes and load limits are:
3/16″ – 660lbs
1/4″ – 880lbs
3/8″ – 2200lbs -
Read MoreQuick View
Eye Bolt, Turned, Zinc
Wire eye bolts are intended for light duty applications such as, tie-downs and wire guiding. These eye bolts are also referred to as bent or turned eye bolts. Do not use them for lifting. Turned eye bolts are manufactured from low carbon cold drawn steel wire and are supplied with NC rolled machine threads with one hex nut. Eye bolts feature a closed loop design that secures cables and chains in order to support the weight of heavy hanging objects such as plumbing pipes and wires.
-
Read MoreQuick View
Eye Lag Screw, Turned
Zinc-Plated Lag Thread Screw Eyes are made with steel strength and are designed to attach cables or rope to surfaces. For use with ropes or cables with the same load rating. Perfect for light duty applications.