Eye Bolt, Machine Forged, Galvanized
Machinery eye bolts are high strength bolts for heavy duty applications. Eye bolts provide a method for anchoring chain and wire rope to a fixed surface such as wood, metal, concrete, etc. Forged galvanized steel material is extra strong and recommended for exterior applications.
Related Products
-
Read MoreQuick ViewWire Rope Clip, Drop Forged, Heavy Duty, HDG
A wire rope clip, sometimes called a clamp, is used to fix the loose end of the loop back to the wire rope. It consists of a U-shaped bolt, a forged saddle, and two nuts.
-
Read MoreQuick ViewRapid Quick Link, Zinc
Quick links feature a threaded end and barrel screw that allow them to be dependable and convenient. The threaded link requires no tools for tightening or loosening, though it does feature a hex shape that can accept a wrench for an extra tight hold.
Available sizes and load limits are:
3/16″ – 660lbs
1/4″ – 880lbs
3/8″ – 2200lbs -
Read MoreQuick ViewClevis Grab Hook, Drop Forged
This high-quality clevis grab hook is made of forged steel, is heat-treated, and coated with a yellow zinc chromate finish so it can survive even the toughest conditions.
-
Quick ViewRize RWC4 X 15 Ft Looped Cable
The Rize Looped Cable enhances the Kwik-Loc suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the job site.
-
Read MoreQuick ViewEye Bolt, Drop Forged, HDG
Eye bolts provide a method for anchoring chain and wire rope to a fixed surface such as wood, metal, concrete, etc. Forged galvanized steel material is extra strong and recommended for exterior applications.
-
Read MoreQuick ViewEye Lag Screw, Drop Forged, HDG
Forged eye lags have a lag screw thread for use in light to medium duty wood applications. These bolts should not be used for angular loads
-
Read MoreQuick ViewWire Rope Clip 316 Stainless
A wire rope clip, sometimes called a clamp, is used to fix the loose end of the loop back to the wire rope. It consists of a U-shaped bolt, a forged saddle, and two nuts.
-
Quick ViewRize RWC3 & KL100 Starter Kit w/Counter Lid & Bucket
Rize Starter Kits include everything you need to get started and finished early on the job.
Kit includes:
1 Roll Cable, RWC3 rated at 150lb loads
100 Kwik-Locs, KL100
1 Bucket with Cable Counter in Lid
1 Rize Cable Cutter -
Quick ViewRize RWC2 X 15 Ft Single Loop Cable Kit, w/ KL75 KWIK-LOC
The Rize Looped Cable enhances the Kwik-Loc suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the job site. The remaining wire rope “drop” is passed through a channel in the Rize Kwik-Loc. Then, the wire rope is either wrapped around the equipment or inserted through a fastening point and back up into the second channel of the same cable lock. The locking teeth inside the cable lock engage the wire rope which secures the equipment in place.
-
Read MoreQuick ViewEye Bolt, Turned, Zinc
Wire eye bolts are intended for light duty applications such as, tie-downs and wire guiding. These eye bolts are also referred to as bent or turned eye bolts. Do not use them for lifting. Turned eye bolts are manufactured from low carbon cold drawn steel wire and are supplied with NC rolled machine threads with one hex nut. Eye bolts feature a closed loop design that secures cables and chains in order to support the weight of heavy hanging objects such as plumbing pipes and wires.
