3M Fire Barrier FD 150+ Sealant
Tried and Tested Fire Protection
Ready-to-use, 3M™ Fire Barrier Sealant FD 150+ is a latex-based elastomeric sealant. This gun-grade sealant cures when dispensed to form a monolithic flexible firestop seal and, when properly installed, this product provides up to 4-hour fire protection in tested and listed systems. We formulated this sealant to help prevent the spread of fire, smoke and noxious gas and firestop joints and through penetrations through floor slabs, walls and other fire-rated building partitions and assemblies. This firestop sealant offers a continuous seal with ± 19% movement capability for construction joints and typical pipe movement and exhibits excellent adhesion to a full range of construction substrates.
- Description
- Downloads
- Applications
- Specifications
Description
- Firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115
- Fire resistive joint system tested up to 4 hours in accordance with ASTM E 1966 (UL 2079)
- Continuous seal remains pliable and allows for typical pipe movement
- Water-based for easy installation, cleanup and disposal
- High-solids formula means limited shrinkage
- Re-enterable and repairable fire barrier sealant
- Multi-viscosity grade offers excellent sealant and caulking properties
- Sealant helps minimize noise transfer
Download the MSDS PDF: MSDS
Recommended Applications
- Construction joints
- Piping, all non-combustible and small diameter combustible
- Cables

Related Products
-
Firestop Closet Toilet Flange Gasket
SpecSeal Closet Flange Firestop Gaskets are one-piece, molded rubber, intumescent pads that install beneath a 3″ (76 mm) or 4″ (102 mm) closet flange to effectively firestop the opening. The die cut rubber gasket is perforated to delineate removable inserts sized to accommodate various outer diameters of toilet flanges.
-
STI BIOSTOP® 750, 5 Gallon
BIOSTOP® 750 is a water-based sealant that comes in three different grades (spray mastic, Self-leveling and Caulk grade) and two colors (red and white). Ideal for use in construction joints such as top of the wall, curtain wall perimeter, expansion, control, etc., and for general construction gaps and voids. The mastic spray is designed for spray application and a economical means of installation on long joint runs.
-
Read MoreQuick ViewSpecSeal Restraint Collar, Pre-Cut or 25 Ft Roll
Metal strip for making restraint collar for SSW Intumescent strips
Cut to length, wrap around pipe with SSW strips in place
Forms collar to contain Blue or Red Strips
Roll is 25 Feet long -
SpecSeal AS205 Elastomer Spray, 5 Gal
SpecSeal® AS200 Elastomeric Spray is designed primarily for the protection of construction joints, curtain wall safing gaps, and certain through-penetrations.
This fire protective joint coating is a water-based, non-halogenated elastomeric coating that contains no solvents, inorganic fibers, nor asbestos. The coating dries to form a flexible, moisture resistant film that can adhere to all common construction surfaces. It provides for up to 50 percent movement. SpecSeal® AS200 is thixotropic and is capable of being applied by airless spray, brush or trowel. -
Read MoreQuick ViewSpecSeal Cast In Place Device
Eliminate core-drilling and firestop after the concrete pour with SpecSeal CID Cast-In Firestop Devices. SpecSeal Cast-In Devices are a sleeve, concrete form and firestop rolled into a single device. SpecSeal Cast-In Devices are available in a range of sizes and heights to accommodate penetrant up to 6″ Trade Size penetrants and concrete depths of up to 36″.
-
3M™ Fire Barrier Moldable Putty Pads
Our 3M™ Fire Barrier Moldable Putty Pads MPP+ are a one-part firestop material used in various fire-rated assemblies, such as electrical box protection. Designed to prevent the spread of fire, smoke and noxious gasses, this intumescent material comes ready to use in convenient 1/10” (2.54 mm) thick pads that are conformable by hand with no mixing or tools. Pads are firestop tested up to 4 hours.
Recommended Applications- Protection of membrane penetrations for listed metallic and non-metallic electrical boxes
- Wall opening protective to meet building requirements
- Seal gaps between cables in multiple penetrations (including fiber optic inner duct)
- Insulated pipe, electrical conduit and metal pipe penetrations
-
BIO Firestop Pillow 3″ X 9″ X 6″
Intumescent Firestop Pillows are designed for use primarily in large openings with cables, cable trays, blank openings or multiple penetrating items. In the event of a fire, BIO™ Firestop Pillows will prevent the spread of flames and hot gases through the openings. Since no cure time is required, BIO™ Firestop Pillows are ready to install. BIO™ Firestop Pillows are reusable since they can be removed and reinstalled if necessary.
-
STI BIOSTOP 1-1/2″ Fire Rated Pipe Collar
Pipe Collars are prefabricated for open and closed through-penetration firestop systems using 1 1/2″(38 mm) to 6″ (152 mm) plastic pipe. An easy locking tab assures easy installation. The collar design greatly reduces the time and expense that is required to install competitive collars.
-
SPEC SEAL EZD22 EZ-PATH FIRE RATED PATHWAY
The EZ Path® Series 22 Fire Rated Pathway is a maintenance-free pathway device designed to allow cables to penetrate fire-rated walls without the need for firestopping. This device features a built-in fire sealing system that automatically adjusts to the amount of cables installed. Once installed in a fire barrier, cables can be easily added or removed at any time without the need to remove or reinstall firestopping materials.
-
Read MoreQuick ViewSpecSeal Collar for Plastic Pipes
SpecSeal SSC Firestop Collars are factory-manufactured firestop devices sized to plastic pipes of up to 6 in. Trade Size. SSC Collars consist of a restraining collar with a factory applied intumescent ensuring the correct amount of material is applied every time. Under fire exposure, SSC Collars quickly expand and collapse combustible piping forming a dense char, resisting the passage of smoke and flame.












