HSS 8 PC Imperial – Annular Cutter Set
This set of 6 premium quality industrial grade cutters have superior performance and no compromises. In addition this kit contains 2 pilot pins.
Available in: 1x ø 9/16″ x 30 mm, 9/16″ x 55 mm, 11/16″ x 30 mm, 11/16″ x 55 mm, 13/16″ x 30 mm, 13/16″ x 55 mm
- Description
- Contents
- Download
Description
6+2 Annular Cutter Set, including 6 cutters and 2 pilot pins.
- Multi-Fit Shank
- Alternate tooth geometry
- Greatly enhanced cutter life
- 1x ø 9/16" x 30 mm
- 1x ø 9/16" x 55 mm
- 1x ø 11/16" x 30 mm
- 1x ø 11/16" x 55 mm
- 1x ø 13/16" x 30 mm
- 1x ø 13/16" x 55 mm
- 2x pilot pin
Download the information sheet: TS-Euroboor
Related Products
-
Hot
Quick ViewThunderTwist SDS Drill Bits
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions. -
Read MoreQuick View
Euroboor HCL 2″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 2″ with a drill depth of 2″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 2″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 2″ from penetrating the second layer of material.
-
Read MoreQuick View
Countersink Drill Bits
Countersinking screws is a often used method for ensuring a flush surface, without bumps of screwheads getting in the way. These cross-hole countersinks are specially designed so that the trailing edge of the hole makes the cut, and they excel at ejecting chips as they drill. Made of strong steel, they ensure years of precision work.
-
Quick View
Ship Auger Drill Bits
Durable hardened cutting edge for long life in tough materials, including nail-embedded wood. Fully-forged bit for maximum durability. Wide flutes for maximum chip removal and less binding. Aggressive screw-pitch for faster drilling. 5/16″ – 1-1/2″ in 6″ and 18″ length.
-
Quick View
“Silver & Deming” Drill Bits
One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.
-
Read MoreQuick View
Silver & Deming, 1/2″ Shank
Made especially for drill presses and milling machines, these Silver & Deming drill bits are 6″ long with a 3″ drilling depth. They all have a 1/2″ shaft.
-
Quick View
Aircraft Drill Bits
Aircraft drill bits are long drill bits originally designed for use in the aircraft industry where they often need to drill holes reaching through deep cavities, and then through thin materials. You will find them invaluable for drilling holes in tight spaces, and drilling holes through long or wide pieces of wood.
-
Read MoreQuick View
Jobber Drill Bit Sets
Jobber drill bits are well-named, because they do the job as expected.
The basic set contains bits made from High-Speed Steel (HSS) with a black oxide finish. The distinctive Black&Gold set has a special finish to help prevent rust.
The Mechanics Stubby set features a reduced length, which means it is less prone to breakage, even under hard use. The Cobalt drill bits are specially made to drill through hard metals, including stainless steel. -
Read MoreQuick View
Rebar Cutter Adapter Shank
The rebar cutter heads require a shank adapter to mount them on. This shank comes in multiple styles, so you can find the proper one to work with your hammer driver. Whether you use SDS-Max, SDS-+,or Spline, these are ready for the job.
-
Quick View
HSS Black Oxide Drill Bits
The HSS Black Oxide bits are made in the USA with a 118 degree point and are available from 1/32″ to 11/16″.e”]
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions.
