Aircraft Drill Bits
Aircraft drill bits are long drill bits originally designed for use in the aircraft industry where they often need to drill holes reaching through deep cavities, and then through thin materials. You will find them invaluable for drilling holes in tight spaces, and drilling holes through long or wide pieces of wood.
- Description
- Selection Chart
Description
- Black Oxide Finish
- 135 degree split point
- NAS 907 Type B
- High Speed Steel
- 3/64″ – 1/2″ in 6″ and 12″ length
- Made In USA
Related Products
-
Quick ViewSpade Drill Bits
Spade bits are used for rough boring in wood. Spade bits are flat, with a centering point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. Intended for high speed use, they are used with electric hand drills. Spade bits are also sometimes referred to as “paddle bits”. Available in 1/4″ – 1-1/2″.
-
Read MoreQuick ViewCountersink Drill Bits
Countersinking screws is a often used method for ensuring a flush surface, without bumps of screwheads getting in the way. These cross-hole countersinks are specially designed so that the trailing edge of the hole makes the cut, and they excel at ejecting chips as they drill. Made of strong steel, they ensure years of precision work.
-
Read MoreQuick ViewJobber Drill Bits, Wire Size
Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a black oxide finish.
These bits are in American Wire Size. Fractional size bits are listed separately. Click on the Jobbers tag below to see more. -
Read MoreQuick ViewEuroboor HCL 2″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 2″ with a drill depth of 2″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 2″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 2″ from penetrating the second layer of material.
-
Quick ViewBit Holder
Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits.
-
Read MoreQuick ViewJobber Drill Bits, Fractional Sizes
Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a black oxide finish.
These bits are in Fractional size. American Wire Size bits are listed separately. Click the Jobbers tab below to see more. -
Quick ViewHSS 8 PC Imperial – Annular Cutter Set
This set of 6 premium quality industrial grade cutters have superior performance and no compromises. In addition this kit contains 2 pilot pins.
Available in: 1x ø 9/16″ x 30 mm, 9/16″ x 55 mm, 11/16″ x 30 mm, 11/16″ x 55 mm, 13/16″ x 30 mm, 13/16″ x 55 mm -
Read MoreQuick ViewSilver & Deming, 1/2″ Shank
Made especially for drill presses and milling machines, these Silver & Deming drill bits are 6″ long with a 3″ drilling depth. They all have a 1/2″ shaft.
-
Read MoreQuick ViewGlass & Tile Bits
These bits are made specifically to cut cleanly through glass and ceramic tile.
-
Read MoreQuick ViewDouble End Drill Bits
With these double end drill bits, you can work twice as long without needing to carry a second bit. No worrying about losing it before it’s needed. As the first end gets worn out, simply remove the bit from the drill, turn it around, and insert the worn end in the chuck. Then get right back to work.
