Tenryu Industrial Aluminum Blades
TENRYU has once again raised the standards in non-ferrous cutting.
Introducing the new IA Series
Up to 20″ Diameter
Resin filled laser cut slots to reduce noise and reduce vibration
Same market leading thin-kerf design to reduce cutting waste and improve sharp life
Still excellent value
- Description
Introducing the new IA Series
Up to 20" Diameter
Resin filled laser cut slots to reduce noise and reduce vibration
Same market leading thin-kerf design to reduce cutting waste and improve sharp life
Still excellent value
Related Products
-
Read MoreQuick ViewPilot Drill Bits for Hole Saw Arbors
As you use your hole saw blades, the pilot bit in the arbor will eventually wear out. Rather than buying a full replacement arbor, you can just buy a new pilot bit and replace the old bit.
These pilot bits are made from High Speed Steel (HSS), and fit all hole saw arbors. They are available in lengths of 3″ and 4″. There is even a carbide tipped 4″ bit available if you need extra cutting power. -
Quick View
Makita 20″ 56cc Farm / Ranch Chainsaw
The Makita 20” 56cc Chain Saw combines a high power-to-weight ratio with easier starts and lower vibration for a full range of applications. The 56cc engine delivers 4.0 HP and an engine speed of 13,800 RPM, with an Easy Start spring-assisted starter. Heavy-duty cartridge filter system increases durability while reducing frequency of maintenance. Additional features include an easy-to-clean chain compartment for efficient clearing of chips, even when rip cutting, and the advanced vibration dampening system is engineered to reduce vibration. The EA5600FRGG is engineered for a range of cutting and trimming applications, and is ideal for farm and ranch work environments.
-
Quick View
Makita Recipro Sawzall w/Cord – 11 AMP
The Makita 11-Amp Reciprocating Saw (model JR3050T) combines a powerful 11 AMP motor with less weight (7.3 lbs.) for all day use and improved performance. The 11 AMP motor with variable speed (0-2,800 SPM) has a 1-1/8 inch blade stroke for efficient cutting. It is ideal for metal cutting, wood cutting, drywall and plaster, plastics, remodeling, and demolition applications.
-
Quick View
Makita 5-7/8″ Metal Cutting Saw, 18V LXT
Makita is the leader in brushless motor technology, and the 18V LXT® Lithium-Ion Brushless Cordless 5-7/8” Metal Cutting Saw delivers faster metal cutting through Unistrut®, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4″ cutting capacity, it is ideal for electrical contractors since it will cut 2” conduit in one pass – a huge time saver. It is also ideal for HVAC, installation, metal building, metal fabrication, plumbing, metal roofing, and for any pro-contractor who requires a best-in-class cordless metal cutting saw.
-
Read MoreQuick View
Hole Saw Kits
These hole saw kits contain the most common sizes needed on the jobsite, held in a durable, custom fit, plastic case. They each contain pilot bits, a small arbor with 1/4″ shank, and a large arbor with 7/16″ shank.
The Electrician’s Kit includes:
7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″ hole saws, and small & large arbors with pilot bits.
The Plumber’s Kit includes:
3/4″, 7/8″, 1-1/8″, 1-1/2″, 1-3/4″, 2-1/4″ hole saws, and small and large arbors with pilot bits.
(Case color and design may vary.) -
Quick View
Makita 14″ Chop Saw 15 AMP
The Makita 14” Cut-Off Saw (LW1401) is a metal-cutting solution built for light gauge metal stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The 15 AMP motor delivers 3,800 RPM for the most demanding metal cutting applications. It is engineered to cut up to 5″ round stock, 4-11/16” square tube, and 4” x 7-5/8” or 2-3/4” x 9-1/8” rectangular tubing. It also features fence adjustment up to 45 degrees right or left, and a “tool-less” vice adjustment for increased productivity. The LW1401 weighs only 37 pounds with a locking pin that secures the cutting head in the down position for easy transport and storage. Additional features include a large ergonomic handle and two-stage lock-off power button.
-
Quick View
Makita 16 Gauge Nibbler, 18V LXT
The 18V LXT® Lithium-Ion Cordless 16 Gauge Nibbler (XNJ01) provides contractors with another 18V LXT® metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.
The XNJ01Z is powered by a Makita-built motor that delivers 1,900 strokes-per-minute (SPM) for fast and smooth cutting. The die holder rotates 360° to meet the demands of the cutting direction, with a cutting radius of 1-3/4” (inner edge) and 2” (outer edge). When cutting, the metal chips are conveniently disposed below the cutting material, which helps prevent damage to the work surface. -
Quick View
Makita Oscillating Multi-Tool, 18V LXT
Trades of all kinds are turning to oscillating multi-tools for a range of applications, and the Makita 18V LXT® Lithium-Ion Cordless Multi-Tool (XMT03Z) delivers corded speed and power without the cord. The XMT03Z is engineered with additional features like reduced vibration and lower noise for improved performance, and is ideal for cutting, sanding, scraping, grout removal, and more.
The XMT03Z has a small diameter barrel grip for improved handling, a large on/off slide switch with lock-on button, and adapters to fit most competitive accessories from Dremel®, Fein, Craftsman, Ridgid, or Ryobi.
The XMT03Z is engineered for a range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class cordless multi-tool.
-
Read MoreQuick View
Makita 2-Speed Recipro Saw, 18V LXT
Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18V LXT® Lithium-Ion Brushless Recipro Saw (XRJ05). It has an electronically-controlled BL™ Brushless motor that matches torque and RPM to the application. The XRJ05 is equipped with efficiency features for faster cutting. The long 1-1/4” stroke length increases cutting efficiency, and the refined crank mechanism design minimizes blade deflection and reduces vibration. Convenience features include an L.E.D. light to illuminate the line of cut, a retractable tool hook, and “tool-less” blade change for faster blade installation and removal.
There are 2 feature models of the XRJ05 Recipro Saw. The choice is with or without two batteries and rapid charger. Options for the Makita XRJ05 are:
- XRJ05Z: Tool only
- XRJ05T: Tool, (2) 18V LXT® Lithium-Ion 5.0Ah batteries, rapid charger, and tool case
-
Quick View
Diamond Vantage VHS 65 Gas Cut Off Saw
The VHS-65 is our featured high-speed gas saw by DIDA. It has a 14″ blade capacity that has up to a 5″ cutting depth, and that can be used wet or dry. It is built with an anti-vibration system to reduce operator fatigue. Engine starts are easy with the compression release valve, and a catalytic converter ensures low emission levels during use.
