Makita 9/16″ Hollow Sockets
The Makita Hollow Sockets are designed to accelerate overhead fastening work by reducing time-spent hand threading fasteners over threaded rod. The hollow shafts allow long bolts and threaded rod to pass through in fastening applications while the increased socket lengths provide better access to nuts located in high places in ceiling or ductwork. The 1/4” hex shank is press-fit for durability and drops readily into an impact driver or driver-drill for convenient, automated fastening.
- Additional information
- Description
- Features
Additional information
| Size | 9/16″ x 6″, 9/16″ x 12″, 9/16″ x 24″ |
|---|
The Makita Hollow Sockets are designed to accelerate overhead fastening work by reducing time-spent hand threading fasteners over threaded rod. The hollow shafts allow long bolts and threaded rod to pass through in fastening applications while the increased socket lengths provide better access to nuts located in high places in ceiling or ductwork. The 1/4” hex shank is press-fit for durability and drops readily into an impact driver or driver-drill for convenient, automated fastening.
SPEED : Hollow socket accelerates fastening over extra long bolts and threaded rod, no more hand-threading
CONVENIENCE : Increased socket length provides better accessibility to nuts in hard to reach places
COMFORT : Lightweight for easy overhead use and reduced wear on the user
DURABILITY : Press-fit shank and corrosion resistant shaft for extra durability and long life
INCLUDES : 9/16" Hollow Sockets, 6", 12", or 24"
- Impact and drill-ready hollow socket design saves time and speeds up fastening applications over extra long bolts, studs and threaded rod
- 12 point socket provides easy fitment over 6 and 12-point fasteners
- Additional socket length provides better accessibility to nuts in hard to reach places
- Axial press-fit 1/4” hex shank provides greater durability and torsional strength compared to a one-piece hollow socket
- Smooth, chamfered inner well prevents shaft from biting and ruining threads for easy fastening and unfastening
- Corrosion resistant finish for long life
- Lightweight for easy overhead use and reduced wear on the user
- Ideal for overhead work on ducts, pipe, studs and threaded rod
- 1/4" hex shank works directly with both impact drivers and drill-drivers
Related Products
-
Quick ViewElite Beam Clamp
Elite Beam Clamps are used as structural attachments to the top or bottom of metal beams, purlins, channel, or angle iron.
-
HotQuick View
Ankr-TITE Wej-It Anchors
This anchor is a high-strength, fully threaded, and torque-controlled expansion anchor designed for anchoring into normal-weight concrete, lightweight concrete, and grouted concrete masonry.
-
Read MoreQuick View
Ceiling Flange, Copper
Ceiling flanges are used to secure threaded rod to a ceiling, so that equipment can be attached to the threaded rod. These flanges are designed to either support 3/8″-16 rod, or 1/2″-13 rod. They have a copper finish, and are excellent choice for interior open ceiling situations where their color will complement other equipment.
-
Read MoreQuick View
Junior Beam Clamp, Plain
Beam clamps provide structural attachment to the flange of metal beams, purlins, channel strut, or angle iron. Most commonly used to attach threaded rod used to support HVAC duct-work, lights, and other hardware in the open or closed ceiling space of a room.
-
Read MoreQuick View
Ceiling Flange, Plain
Ceiling flanges are used to secure threaded rod to a ceiling, so that equipment can be attached to the threaded rod. These flanges are designed to either support 3/8″-16 rod, or 1/2″-13 rod. They have a natural, plain finish, and are excellent choice for interior use.
-
Quick View
U-Bolt Style Beam to Channel Clamp
The U-Bolt style beam-to-channel clamp features a piece of bent plate and a u-bolt that is threaded on both sides to secure a strut in place against a beam. The strut is fed through the u-bolt, which is then tightened to secure both the plate to the beam and the strut to the plate. U-style beam clamps can be used to secure strut to either the underside of the beam or the inside of the beam, depending on the configuration of the clamp.
-
HotQuick View
Hex Head Cap Screws – Grade 5
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 5 is the most common grade used in manufacturing assembly. Zinc plating, retards the corrosion rate in a normal atmosphere. Tensile Strength: 120,000 psi minimum. -
Read MoreQuick View
Makita 3/4″ Hollow Sockets
The Makita Hollow Sockets are designed to accelerate overhead fastening work by reducing time-spent hand threading fasteners over threaded rod. The hollow shafts allow long bolts and threaded rod to pass through in fastening applications while the increased socket lengths provide better access to nuts located in high places in ceiling or ductwork. The 1/4” hex shank is press-fit for durability and drops readily into an impact driver or driver-drill for convenient, automated fastening.
-
Read MoreQuick View
SDS Bits for Drop-In Anchor
SDS Drill bits designed to produce the perfect depth of hole for mini drop-in anchors.
These bits are made in the USA, and feature a solid hardened steel body design with premium carbide braised in the tip. They also have a wide shoulder to prevent drilling too deep and hitting rebar or high tension wires, and an innovative dust removal design for fast drilling. -
Quick View
POWER-DROP Drop-In Anchors
POWER-Drop anchors are internally threaded anchors that provide wedge anchor performance with the convenience of a drop-in anchor. The safety shoulder supports the clip when the anchor is under strain to eliminate bolt-end collapse and/or clip slippage under ultimate loading conditions. The POWER-Drop is seismic rated: allowable values may be increased 33.3% for short-term loading in resisting earthquake or wind loads. Numerous head style and size options are available: they may be used with machine screws, tamper-proof bolts, threaded rod and a variety of other male-threaded fastenersCan be used with almost any material, including:
- Normal Weight Concrete
- Lightweight Concrete
- Solid Masonry
POWER-Drop anchors are internally threaded anchors that provide wedge anchor performance with the convenience of a drop-in anchor. The safety shoulder supports the clip when the anchor is under strain to eliminate bolt-end collapse and/or clip slippage under ultimate loading conditions. The POWER-Drop is seismic rated: allowable values may be increased 33.3% for short-term loading in resisting earthquake or wind loads. Numerous head style and size options are available: they may be used with machine screws, tamper-proof bolts, threaded rod and a variety of other male-threaded fasteners