Wire Rope Sleeves, Aluminum
A wire rope sleeve is used to terminate a cable, or join two cables together. When properly applied to 7×7, 7×19 or 6×19 IWRC classification wire rope, the aluminum sleeve eye-splice termination provides a secured connection equal to the breaking strength of the wire rope. This process is also called swaging.
- Additional information
- Description
Additional information
| Size | 1/16″, 3/32″, 1/8″, 5/32″, 3/16″, 1/4″ |
|---|
A wire rope sleeve is used to terminate a cable, or join two cables together. When properly applied to 7×7, 7×19 or 6×19 IWRC classification wire rope, the aluminum sleeve eye-splice termination provides a secured connection equal to the breaking strength of the wire rope. This process is also called swaging.
Related Products
-
Read MoreQuick ViewWire Rope Thimble, HDG
Wire rope thimbles are used in wire rope assemblies to keep an eye from being crushed. When a wire rope assembly is terminated with an eye or loop at the end, a cable thimble is inserted to form the eye of the loop before the rope is secured. Steel thimbles (or stainless steel thimbles in high corrosive environments), offer added protection from wear and tear of direct contact and deformation of the eye, extending the service life of the Wire Rope or Wire Rope Sling.
-
Quick ViewRize RWC3 & KL100 Starter Kit w/Counter Lid & Bucket
Rize Starter Kits include everything you need to get started and finished early on the job.
Kit includes:
1 Roll Cable, RWC3 rated at 150lb loads
100 Kwik-Locs, KL100
1 Bucket with Cable Counter in Lid
1 Rize Cable Cutter -
Read MoreQuick ViewEye Bolt, Machined w/Shoulder, Stainless Steel
Machinery eye bolts are high strength bolts for heavy duty applications. Eye bolts provide a method for anchoring chain and wire rope to a fixed surface such as wood, metal, concrete, etc. Forged galvanized steel material is extra strong and recommended for exterior applications.
-
Quick ViewRize RWC2 X 15 Ft Single Loop Cable Kit, w/ KL75 KWIK-LOC
The Rize Looped Cable enhances the Kwik-Loc suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the job site. The remaining wire rope “drop” is passed through a channel in the Rize Kwik-Loc. Then, the wire rope is either wrapped around the equipment or inserted through a fastening point and back up into the second channel of the same cable lock. The locking teeth inside the cable lock engage the wire rope which secures the equipment in place.
-
Read MoreQuick ViewWire Rope Clip, Drop Forged, Heavy Duty, HDG
A wire rope clip, sometimes called a clamp, is used to fix the loose end of the loop back to the wire rope. It consists of a U-shaped bolt, a forged saddle, and two nuts.
-
Read MoreQuick ViewWire Rope Clip 316 Stainless
A wire rope clip, sometimes called a clamp, is used to fix the loose end of the loop back to the wire rope. It consists of a U-shaped bolt, a forged saddle, and two nuts.
-
Read MoreQuick ViewEye Lag Screw, Turned
Zinc-Plated Lag Thread Screw Eyes are made with steel strength and are designed to attach cables or rope to surfaces. For use with ropes or cables with the same load rating. Perfect for light duty applications.
-
Read MoreQuick ViewEye Bolt, Turned, Zinc
Wire eye bolts are intended for light duty applications such as, tie-downs and wire guiding. These eye bolts are also referred to as bent or turned eye bolts. Do not use them for lifting. Turned eye bolts are manufactured from low carbon cold drawn steel wire and are supplied with NC rolled machine threads with one hex nut. Eye bolts feature a closed loop design that secures cables and chains in order to support the weight of heavy hanging objects such as plumbing pipes and wires.
-
Quick ViewEye Bolt, Turned w/Open Eye, Zinc
Wire open-eye or hook bolts are intended for light duty applications such as hanging small plants or other objects, and wire guiding. These eye bolts are also referred to a bent or turned eye bolts. Do not use them for lifting. Turned eye bolts are manufactured from low carbon cold drawn steel wire and are supplied with NC rolled machine threads with one hex nut unassembled. Open eye bolts feature an open hook design that allows the user to easily hang and remove loads as needed.
-
Quick ViewRize RWC3 X 15 Ft 90 Degree Eyelet Cable
Features the exclusive Rize RWC3 cable, rated at 150 pounds load, with eyelets preinstalled. For quick and secure hanging of light panels, or other overhead items with grid clip anchor points available.
