Weld Stud Shear Connector
Weld Stud Shear Connectors are unthreaded with an upset head. They are designed to interconnect the concrete slab to the load bearing steel beams. Because of the inter connection, construction resists shear loading between the concrete and steel beams. Weld Stud Shear Connectors meet with AWS and all other applicable specifications, and are used in all types of concrete connections.
- Additional information
- Description
- Procedure
Additional information
| Size | 1/2″ x 3-1/8″ x 3″, 1/2″ x 4-1/8″ x 4″, 1/2″ x 5-5/16″ x 5″, 1/2″ x 6-1/8″ x 6″, 1/2″ x 8-1/8″ x 8″, 5/8″ x 4-1/8″ x 4″, 5/8″ x 5-3/16″ x 5″, 5/8″ x 6-3/16″ x 6″, 5/8″ x 8-3/16″ x 8″, 3/4″ x 3-3/16″ x 3″, 3/4″ x 4-3/16″ x 4″, 3/4″ x 4-7/8″ x 4″, 3/4″ x 5-3/16″ x 5″, 3/4″ x 6-3/16″ x 6″, 3/4″ x 8-3/16″ x 8″, 3/4″ x 10-3/16″ x 10″, 1″ x 10″ x 10″ |
|---|
Weld Stud Shear Connectors are unthreaded with an upset head. They are designed to interconnect the concrete slab to the load bearing steel beams. Because of the inter connection, construction resists shear loading between the concrete and steel beams. Weld Stud Shear Connectors meet with AWS and all other applicable specifications, and are used in all types of concrete connections.
Related Products
-
Quick View1″ Conduit Clip w/Pin
Designed for use with Powder Actuated tools, this EMT clip will secure conduit to concrete, without the need to drill a hole first.
-
Read MoreQuick ViewRamset Fastening Pins
The Ramset Fastening System Drive Pins are powder actuated pins used to attach material to concrete or steel. The pins are specifically fabricated for toughness and durability.
The 1/2″ and 5/8″ pins are knurled for extra grip, and are specifically engineered for use in structural-quality steel.
The 3/4″ and 1″ pins are perfect for attaching metal track to concrete.
The 1″ up to 2″ pins are sized for attaching furring strips or plywood to concrete.
The 2-1/2″ and 3″ pins are designed to attach 2×4’s to concrete. -
Read MoreQuick ViewHollow Wall Anchor, Long and Short
The sleeve type hollow wall anchor is designed for use in base materials such as plaster, wallboard, concrete block, hollow tile or plywood. It is installed using a drill and can be used with various wall thicknesses. The sections of the sleeve expand as the screw is tightened and driven into the wall. The front section of the hollow wall anchor will add permanent screw threads, so that once set, the screw may be removed as often as necessary without affecting the anchor.
These anchors are also known as Molly bolts. -
Read MoreQuick ViewLead Machine Screw Anchor
The lead machine screw anchor is an internally threaded anchor designed to make female threads into concrete. It features a soft lead shell on the outside and steel threads on the inside. They are designed for solid concrete but can be installed into hollow block or brick with a special setting tool.
-
Hot
Quick ViewOriginal Wej-It® Wedge Anchors
The Wej-It original Wedge Anchors are time tested with proven reliabilty and has been an industry standard for over 60 years.
-
Quick ViewHammer Drive Tool
Drive pin anchors are installed in pre-drilled holes. Using this tool and a hammer, a solid strike drives a nail into the anchor body, expanding the anchor to form a tight fit. These anchors secure light loads to masonry materials.
-
Read MoreQuick ViewLead Wood Screw Anchor
Lead wood screw anchors, also known as lead wood screw shields, are ideally suited for projects that require fastening wood or anchoring brick, concrete, block or softer masonry. You’ll find these anchors install easily as the lead alloy material is soft enough to use, yet hard enough to provide strong holding power. A pre-drilled hole is required for installation.
We do not recommend for ceiling applications. -
Read MoreQuick ViewToggle Bolt, Zinc Plated
The Toggle Bolt is a spring wing type hollow wall anchor designed for use in block, wallboard and other hollow base materials. The Toggle Bolt is a two-part assembly consisting of a machine screw and a spring wing toggle. Sizes range from 1/8″ x 2″ to 1/2″ x 6″ with combo round, flat, mushroom, tie-wire or slotted hex head styles.
-
Read MoreQuick ViewHammer Drive Pins
Drive pin anchors are installed in pre-drilled holes with a hammer strike that drives a nail into the anchor body, expanding the anchor to form a tight fit. These anchors secure light loads to masonry materials.
-
Read MoreQuick ViewPlastic Anchor Kit
This kit contains standard drywall/concrete expansion anchors, screws, and a masonry drill bit sized appropriately.
Kits are available with standard Phillips pan head screws, or with slotted hex head washer screws.
Sizes are:
3/16″ Anchor & Bit, with #6 – #8 x 3/4″ Phillips Pan Head Screw
1/4″ Anchor & Bit, with #10 – #12 x 1″ Phillips Pan Head Screw
1/4″ Anchor & Bit, with #10 – #12 x 1″ Slot Hex Head Screw
