Thundertwist SDS-MAX Masonry Bits
The ThunderTwist SDS-MAX masonry bits have a TriCarb grade tip which guarantees longer life, with faster penetration due to increased chiseling action. The ThunderTwist also has a flute design which, combined with a copper brazing allow, creates the most reliable drill bit on the market.
ThunderTwist bits are made with the highest quality American chrome-molybdenum-nickel steel available. Then they are vacuum heat-treated, and shot-peened for superiors strength under the roughest conditions.
- Additional information
- Description
Additional information
| Size | 1/2″ X 23″ X 18″, 5/8″ X 18″ X 12″, 3/4″ X 13″ X 7″, 3/4″ X 18″ X 16″, 7/8″ X 23″ X 18″, 1-1/8″ X 23-1/2″ X 18″, 1-1/4″ X 23-1/2″ X 18″, 1-3/8″ X 18″ X 23″, 1-1/2″ X 23-1/2″ X 18″, 1″ X 13″ X 8″, 1″ X 23-1/2″ X 18″ |
|---|
The ThunderTwist SDS-MAX masonry bits have a TriCarb grade tip which guarantees longer life, with faster penetration due to increased chiseling action. The ThunderTwist also has a flute design which, combined with a copper brazing allow, creates the most reliable drill bit on the market.
ThunderTwist bits are made with the highest quality American chrome-molybdenum-nickel steel available. Then they are vacuum heat-treated, and shot-peened for superiors strength under the roughest conditions.
Related Products
-
Read MoreQuick ViewEuroboor IBC Pilot Pins
Genuine Euroboor pilot pins imported directly from the manufacturer in The Netherlands. These pilot pins are manufactured for use with short short or long Euroboor hole cutters from 1/2″ to 1″ in diameter.
-
Quick ViewHSS 8 PC Imperial – Annular Cutter Set
This set of 6 premium quality industrial grade cutters have superior performance and no compromises. In addition this kit contains 2 pilot pins.
Available in: 1x ø 9/16″ x 30 mm, 9/16″ x 55 mm, 11/16″ x 30 mm, 11/16″ x 55 mm, 13/16″ x 30 mm, 13/16″ x 55 mm -
Quick ViewImpactech Magnetic Nutsetter Hex Bit
Made from S2 modified shock resistant steel for professional performance and durability. Featuring a patented spiral torsion zone absorbs impact and extends bit life. Proprietary precision CNC machined tips for excellent fit in fastener recess. Tested to outperform all leading brands in lifecycle and tip failure testing. Made with a high strength industrial magnet for securing your bits.
-
Quick ViewAircraft Drill Bits
Aircraft drill bits are long drill bits originally designed for use in the aircraft industry where they often need to drill holes reaching through deep cavities, and then through thin materials. You will find them invaluable for drilling holes in tight spaces, and drilling holes through long or wide pieces of wood.
-
Read MoreQuick ViewJobber Drill Bits, Fractional Sizes, Cobalt
These Cobalt Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a cobalt layer finish.
These bits are in Fractional size. American Wire Size bits are listed separately. Click the Jobbers tab below to see more. -
Read MoreQuick ViewGlass & Tile Bits
These bits are made specifically to cut cleanly through glass and ceramic tile.
-
Read MoreQuick ViewMasonry Bits, Carbide Tip
TruCut Masonry Bits
High quality masonry drill bits with heavy duty carbide tips. These masonry bits will drill through any rock or concrete that needs a hole in it.
The Premium quality bits have a hex-shaped shaft to eliminate spinning in the drill chuck. They also achieve a longer life at higher speeds due to “Super H” grade carbide tips. -
Quick ViewShip Auger Drill Bits
Durable hardened cutting edge for long life in tough materials, including nail-embedded wood. Fully-forged bit for maximum durability. Wide flutes for maximum chip removal and less binding. Aggressive screw-pitch for faster drilling. 5/16″ – 1-1/2″ in 6″ and 18″ length.
-
Read MoreQuick ViewEuroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.
-
Quick View“Silver & Deming” Drill Bits
One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.
