Tenryu Industrial Aluminum Blades
TENRYU has once again raised the standards in non-ferrous cutting.
Introducing the new IA Series
Up to 20″ Diameter
Resin filled laser cut slots to reduce noise and reduce vibration
Same market leading thin-kerf design to reduce cutting waste and improve sharp life
Still excellent value
- Description
Introducing the new IA Series
Up to 20" Diameter
Resin filled laser cut slots to reduce noise and reduce vibration
Same market leading thin-kerf design to reduce cutting waste and improve sharp life
Still excellent value
Related Products
-
Read MoreQuick ViewPilot Drill Bits for Hole Saw Arbors
As you use your hole saw blades, the pilot bit in the arbor will eventually wear out. Rather than buying a full replacement arbor, you can just buy a new pilot bit and replace the old bit.
These pilot bits are made from High Speed Steel (HSS), and fit all hole saw arbors. They are available in lengths of 3″ and 4″. There is even a carbide tipped 4″ bit available if you need extra cutting power. -
Quick View
Makita Oscillating Multi-Tool, 18V LXT
Trades of all kinds are turning to oscillating multi-tools for a range of applications, and the Makita 18V LXT® Lithium-Ion Cordless Multi-Tool (XMT03Z) delivers corded speed and power without the cord. The XMT03Z is engineered with additional features like reduced vibration and lower noise for improved performance, and is ideal for cutting, sanding, scraping, grout removal, and more.
The XMT03Z has a small diameter barrel grip for improved handling, a large on/off slide switch with lock-on button, and adapters to fit most competitive accessories from Dremel®, Fein, Craftsman, Ridgid, or Ryobi.
The XMT03Z is engineered for a range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class cordless multi-tool.
-
Quick View
Makita 5-7/8″ Metal Cutting Saw, 18V LXT
The 18V LXT® Brushless Cordless 5-7/8” Metal Cutting Saw (XSC04) delivers faster metal cutting through Unistrut®, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4″ cutting capacity, it is ideal for electrical contractors as it will cut 2” conduit in one pass – a huge time saver. It includes a transparent chip collector box to capture cutting debris. The brushless motor is engineered for efficiency, and in run-time testing the Saw made up to 125 cuts per charge in 1” SCH 40 pipe using an 18V 5.0Ah battery.
Makita offers optimum 5-7/8″ blade options for use with the XSC04: 32T carbide tipped for metal and general purpose; 52T for thin metal; 52T for aluminum; and 60T for stainless steel (all sold separately). -
Quick View
Makita Multi Tool Kit w/ Cord
Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.
The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding. -
Quick View
Makita 12″ Dual Bevel Sliding Compound Miter Saw
The Makita 12” Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1219L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). It will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).
-
Read MoreQuick View
Hole Saw Kits
These hole saw kits contain the most common sizes needed on the jobsite, held in a durable, custom fit, plastic case. They each contain pilot bits, a small arbor with 1/4″ shank, and a large arbor with 7/16″ shank.
The Electrician’s Kit includes:
7/8″, 1-1/8″, 1-3/8″, 1-3/4″, 2″, 2-1/2″ hole saws, and small & large arbors with pilot bits.
The Plumber’s Kit includes:
3/4″, 7/8″, 1-1/8″, 1-1/2″, 1-3/4″, 2-1/4″ hole saws, and small and large arbors with pilot bits.
(Case color and design may vary.) -
Quick View
Makita Straight Metal Shear, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless 18 Gauge Straight Shear (model XSJ01) combines high speed, compact size and less weight. The XSJ01Z has a Makita-built 4-pole motor that delivers 2,800 strokes per minute (SPM) for faster cutting. The tough double-cut shear design handles up to 18 gauge mild steel and 20 gauge stainless steel for straight or scribe cuts without deforming the material. The swivel shear head rotates 360 degrees for increased cutting options. yet it weighs just 5.3 lbs. for better control in cutting steel and stainless steel sheet metal.
The XSJ01Z is a powerful yet compact metal shear built for any professional user seeking a best-in-class compact cordless metal shear for metalworking tasks. -
Quick View
Exact TCT Tungsten Carbide Blade
The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
TCT 165: Blade with tungsten carbide tips for general use. Suitable for cutting steel, copper, aluminum and plastics. TCT blades can be sharpened a couple of times so they will become like new.6-1/2″ TCT CARBIDE BLADE FOR 360E STEEL-COPPER-PLASTICS
-
Read MoreQuick View
Makita Bandsaw Blades, 44-7/8″
Makita’s Portable Band Saw Blade features bi-metal construction that lasts longer than carbon blades for added user convenience and value. They make clean, quick cuts in a wide variety of applications including cutting all thread, rebar, pipe and channel. For use cutting a wide variety of materials including mild steel, aluminum and stainless steel.
-
Quick View
Makita 16 Gauge Nibbler, 18V LXT
The 18V LXT® Lithium-Ion Cordless 16 Gauge Nibbler (XNJ01) provides contractors with another 18V LXT® metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.
The XNJ01Z is powered by a Makita-built motor that delivers 1,900 strokes-per-minute (SPM) for fast and smooth cutting. The die holder rotates 360° to meet the demands of the cutting direction, with a cutting radius of 1-3/4” (inner edge) and 2” (outer edge). When cutting, the metal chips are conveniently disposed below the cutting material, which helps prevent damage to the work surface.
