Rize KL100 KWIK-LOC Cable Connectors
The Rize Kwik-Loc connector is designed to work with Rize RWC cables of the appropriate size. The Kwik-Loc KL100 has a rated maximum work load of 150lbs, with a 5:1 safety factor.
- Description
The Rize Kwik-Loc connector is designed to work with Rize RWC cables of the appropriate size. The Kwik-Loc KL100 has a rated maximum work load of 150lbs, with a 5:1 safety factor.
Related Products
-
Quick ViewRize RWC4 X 15 Ft Looped Cable
The Rize Looped Cable enhances the Kwik-Loc suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the job site.
-
Quick ViewDouble Loop Safety Chain
Double Loop Chain is a versatile non-welded chain that combines flexibility and strength. This general utility chain is ideal for a wide variety of uses such as animal restraints, gates, porch swings, playground, gymnasium, padlock chains, boat chains, and fixture hanging.
-
Quick View
Rize RWC3 X 10 Ft 45 Degree Eyelet Cable
Features the exclusive Rize RWC3 cable, rated at 150 pounds load, with eyelets preinstalled. For quick and secure hanging of light panels, or other overhead items with grid clip anchor points available.
-
Read MoreQuick View
Aircraft Cable, Galvanized
Galvanized cable has been an industry staple for decades, and for good reason. Through smart engineering, it’s one of the most versatile and reliable building materials.
Our galvanized cable is available as 7×7 strands for 1/16″ and 3/32″, and as 7×19 strands for larger sizes up to 3/8″.
-
Read MoreQuick View
Rapid Quick Link, Zinc
Quick links feature a threaded end and barrel screw that allow them to be dependable and convenient. The threaded link requires no tools for tightening or loosening, though it does feature a hex shape that can accept a wrench for an extra tight hold.
Available sizes and load limits are:
3/16″ – 660lbs
1/4″ – 880lbs
3/8″ – 2200lbs -
Read MoreQuick View
Malleable Wire Rope Clip, Galvanized
Wire rope clips are fittings used to make an eye or join two cable or wire rope ends together. This design of wire rope clip is available to handle wire rope or strand sizes ranging from 1/16″ – 1-1/8″. Malleable wire rope clips are used in light duty & general purpose applications. Each malleable wire rope clip is zinc plated.
-
Quick View
Rize RWC2 & KL75 Starter Kit w/Counter Lid & Bucket
Rize Starter Kits include everything you need to get started and finished early on the job.
Kit includes:
1 Roll Cable, RWC2 rated at 75lb loads
100 Kwik-Locs, KL75
1 Bucket with Cable Counter in Lid
1 Rize Cable Cutter -
Read MoreQuick View
Eye Lag Screw, Drop Forged, HDG
Forged eye lags have a lag screw thread for use in light to medium duty wood applications. These bolts should not be used for angular loads
-
Read MoreQuick View
Eye Bolt, Turned, Zinc
Wire eye bolts are intended for light duty applications such as, tie-downs and wire guiding. These eye bolts are also referred to as bent or turned eye bolts. Do not use them for lifting. Turned eye bolts are manufactured from low carbon cold drawn steel wire and are supplied with NC rolled machine threads with one hex nut. Eye bolts feature a closed loop design that secures cables and chains in order to support the weight of heavy hanging objects such as plumbing pipes and wires.
-
Quick View
Rize RWC2 X 15 Ft Single Loop Cable Kit, w/ KL75 KWIK-LOC
The Rize Looped Cable enhances the Kwik-Loc suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the job site. The remaining wire rope “drop” is passed through a channel in the Rize Kwik-Loc. Then, the wire rope is either wrapped around the equipment or inserted through a fastening point and back up into the second channel of the same cable lock. The locking teeth inside the cable lock engage the wire rope which secures the equipment in place.
