Pro-Tect System for Pool Enclosures
PRO-TECT Fastener Protection System consists of a nylon sleeve and a cap that, together, cover and protect the anchor screw. The PRO-TECT nylon sleeve gives protection from electrolysis, providing worry-free installation while extending the life of the product. This is very important for the harsh conditions of the coastal environments and extreme temperatures.
The PRO-TECT cap snaps onto the top of the nylon sleeve, covering the head of the Blue-Tap anchor screw. Due to its special design, the cap will not come off easily. Caps are available in White and Bronze.
By repelling water and preventing penetration, PRO-TECT reduces or eliminates the need for warranty work, increasing life expectancy of the structures.
- Additional information
- Description
- Video
Additional information
| Part | Cap – White, Cap – Bronze, Sleeve – Nylon |
|---|
PRO-TECT Fastener Protection System consists of a nylon sleeve and a cap that, together, cover and protect the anchor screw. The PRO-TECT nylon sleeve gives protection from electrolysis, providing worry-free installation while extending the life of the product. This is very important for the harsh conditions of the coastal environments and extreme temperatures.
The PRO-TECT cap snaps onto the top of the nylon sleeve, covering the head of the Blue-Tap anchor screw. Due to its special design, the cap will not come off easily. Caps are available in White and Bronze.
By repelling water and preventing penetration, PRO-TECT reduces or eliminates the need for warranty work, increasing life expectancy of the structures.
Related Products
-
Hot
Quick ViewHex Head Cap Screws – Grade 5
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 5 is the most common grade used in manufacturing assembly. Zinc plating, retards the corrosion rate in a normal atmosphere. Tensile Strength: 120,000 psi minimum. -
Read MoreQuick View
Sidewalk Bolt, Stainless Steel
Also known as shutter screws, the ultra-wide truss head distributes the load over a large area for excellent holding pressure when placing plywood, metal, and fabric hurricane panels or removable track. Made of 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic.
-
Read MoreQuick View
Mro Thread-Locker, 50ml Bottle
MRO Solutions thread-locking products are anaerobic compounds formulated for sealing, joining, fastening, retaining, and generally locking together metal components. Unlike other thread-lockers, MRO compounds are non-surface sensitive, so they do not require use of primers for curing.
Once parts are mated with MRO thread-lockers, they form a unitized assembly that resists vibration. In addition, the mated parts are sealed against attack from corrosion, internal rust, seizure, solvents, gases, and other chemicals. -
Quick View
Elite Beam Clamp
Elite Beam Clamps are used as structural attachments to the top or bottom of metal beams, purlins, channel, or angle iron.
-
HotQuick View
Hex Head Cap Screws – Grade 2
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Plain finish, or bare metal, will have a coating of light oil to resist corrosion. Grade 2 is generally an economical but lower strength fastener. -
Wej-It Ultra-Drop™ Drop-In Anchors
The Ultra-Drop Drop In Anchor that requires relatively shallow embedment. It also eliminates the requirement for rod couplings in overhead applications.
The setting tool is used to expand the Drop-In anchors after they are placed in the drilled hole.
-
Read MoreQuick View
Makita 9/16″ Hollow Sockets
The Makita Hollow Sockets are designed to accelerate overhead fastening work by reducing time-spent hand threading fasteners over threaded rod. The hollow shafts allow long bolts and threaded rod to pass through in fastening applications while the increased socket lengths provide better access to nuts located in high places in ceiling or ductwork. The 1/4” hex shank is press-fit for durability and drops readily into an impact driver or driver-drill for convenient, automated fastening.
-
Sleeve-TITE Sleeve Expansion Anchors
Sleeve-TITE Expansion Anchors come fully assembled and ready to use. This speeds installation and eliminates the p
roblem of missing components. Sleeve-TITE is suitable for a wide variety of applications and available with acorn or hex nut, or flat head, or with rod coupling.Can be used with almost any material, including:
- Normal Weight Concrete
- Lightweight Concrete
- Hollow Masonry
- Solid Masonry
-
Read MoreQuick View
Flat Washers, USS & SAE
-
Read MoreQuick View
T-Nuts
T-nuts are barrel shaped fasteners with internal threading, and are used to provide an anchor point for a bolt in a piece of wood, whether a flat board or a dimensional piece. They are especially useful when a flush surface is wanted. T-nuts have a flat base with prongs bent up at 90° angles, parallel to the barrel. After pre-drilling a hole, the t-nut can be fixed in place either by tightening a bolt into it from the top, which pulls the prongs into the wood, or using hammer to pound the locking prongs into the wood until flush.
roblem of missing components. Sleeve-TITE is suitable for a wide variety of applications and available with acorn or hex nut, or flat head, or with rod coupling.
