Pegatanke Cold-Welding Epoxy, White
PEGATANKE White is a high quality epoxy adhesive, designed to provide esthetic finishing touches. As it can dry underwater, it is an ideal glue for repairing boats and refrigerators. This adhesive resists demanding physical and chemical conditions in industrial, automotive, naval, electrical, construction repairs, among others. Moreover, it is fully functional in home repairs; withstanding high temperatures, tension and corrosive effects of chemicals and solvents.
IDEAL FOR:
- Refrigerators
- Ships
- Windows
- Description
- Instructions
- Data Sheets & Downloads
PEGATANKE White is a high quality epoxy adhesive, designed to provide esthetic finishing touches. As it can dry underwater, it is an ideal glue for repairing boats and refrigerators. This adhesive resists demanding physical and chemical conditions in industrial, automotive, naval, electrical, construction repairs, among others. Moreover, it is fully functional in home repairs; withstanding high temperatures, tension and corrosive effects of chemicals and solvents.
IDEAL FOR:
- Refrigerators
- Ships
- Windows
USE INSTRUCTIONS:
- Thoroughly clean the area or surface where the glue will be applied.
- Mix components 1 and 2 in equal parts.
- Stir the components for 3 minutes until obtaining homogeneous consistency.
- Apply the mixture evenly in amounts proportional to the surface to be repaired.
- Join the parts to be glued together and secure them if needed for them to remain steady.
- Let dry for 30 minutes in the sun or 1 ½ hours in the shade (under roof or in cloudy days). This time may vary according to room temperature. See packaging for more information.
USED IN:
Aluminium • Ceramic • Copper • Fibreglass • Slab • Plastic • Wood • Metal • MDF • Glass
Safety Data Sheet
Equivalent SDS from another Manufacturer
Related Products
-
Read MoreQuick ViewThreaded Stud
Threaded studs are available in a variety of thread and shank lengths for use in concrete, some types of concrete block, and A36 or A572 structural steel. They are used for applications where it may be desirable to remove the fixture, where shimming may be required or for suspending sprinkler systems.
The threaded studs have a specially designed point to allow proper penetration into the base material. A plastic flute is mounted over the point to retain the drive pin in the fasteners guide of the tool providing guidance during the driving operation. A plastic cap is also provided to protect the threads of the fastener during the driving process as well as providing guidance during installation. -
Read MoreQuick ViewLead Hammer Drive Anchor
The Hammer-Set anchor is a mechanical drive anchor consisting of a zinc die cast expansion body and zinc plated steel expander drive pin. Hammer-Set anchors are medium-duty anchors designed for a variety of fastening applications in concrete, block, and brick. It is ideal for light-duty and tamper-resistant applications. Use Hammer-Set anchors to attach termination bars, drywall track, electrical boxes and clips, flashing, lumber and more.
-
Read MoreQuick View
Anchor Setting Tool Powder Load Strips
Powder actuated tools are the quickest, most efficient way to set fasteners into concrete slabs and block walls. These color coordinated .25 and .27 caliber powder loads provide the force needed to drive those fasteners into place. They provide from medium power up to the highest power of loads available.
Each strip has 10 powder loads, and there are 10 strips per box.
Caution: Always test-fasten with the lowest power level for your tool. If more power is necessary, use the next highest power level until proper level and fastening is achieved. Refer to operator’s manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in serious injury or death to users or bystanders. -
Read MoreQuick View
Toggle Bolt, Zinc Plated
The Toggle Bolt is a spring wing type hollow wall anchor designed for use in block, wallboard and other hollow base materials. The Toggle Bolt is a two-part assembly consisting of a machine screw and a spring wing toggle. Sizes range from 1/8″ x 2″ to 1/2″ x 6″ with combo round, flat, mushroom, tie-wire or slotted hex head styles.
-
Read MoreQuick View
Pipe Spike
Powers Pipe SPIKE® is ideal for ceiling applications where hanging threaded rod is needed.
The SPIKE® anchor is a patented, one-piece, tamper-proof vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The SPIKE® anchor is formed with an “s” shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation. -
Quick View
1-1/4″ Ceiling Clip Assembly
The Ramset Ceiling Clip is designed to mount into a slanted ceiling, with hanging wire attached through the eye. Able to support light loads such as suspended ceiling grids.
-
Read MoreQuick View
Toggle Wing, Zinc Plated
A Toggle spring wing anchor, also called a toggle nut, in zinc plated steel is an anchor used in hollow wall applications (walls with space on the other side) such as drywall and concrete blocks (also called cinder blocks) or any hollow concrete masonry unit. Toggle wings are often used to replace spring wings used in the installations of toggle bolts. Toggle nuts are used with machine screws through pre-drilled holes.
-
Read MoreQuick View
Grey Plastic Anchor, w/Lip
This is a standard plastic expansion anchor that can be used in drywall or solid walls for light hanging or attaching needs.
-
Read MoreQuick View
Nylon Round Head Nail-In
-
HotQuick View
Ankr-TITE® CCAT Cracked Concrete Wedge Anchors
The CCAT Cracked Concrete Wedge Anchors are engineered to provide superior performance in cracked concrete in both seismic and wind load conditions.
