Masonry Bits, Carbide Tip
TruCut Masonry Bits
High quality masonry drill bits with heavy duty carbide tips. These masonry bits will drill through any rock or concrete that needs a hole in it.
The Premium quality bits have a hex-shaped shaft to eliminate spinning in the drill chuck. They also achieve a longer life at higher speeds due to “Super H” grade carbide tips.
- Additional information
- Description
Additional information
| Size | 1/8″ X 3″ MASONRY DRILL BIT, 5/32″ X 5-1/2″ MASONRY DRILL BIT, 3/16″ X 4″ MASONRY DRILL BIT, 3/16″ X 6″ MASONRY DRILL BIT, 7/32″ X 4″ MASONRY DRILL BIT, 1/4″ X 12″ MASONRY DRILL BIT, 1/4″ X 24″ MASONRY DRILL BIT, 1/4″ X 36″ MASONRY DRILL BIT, 1/4″ X 4″ MASONRY DRILL BIT, 1/4″ X 6″ MASONRY DRILL BIT, 5/16″ X 12″ MASONRY DRILL BIT, 5/16″ X 6″ MASONRY DRILL BIT, 3/8″ X 12″ MASONRY DRILL BIT, 3/8″ X 36″ MASONRY DRILL BIT, 3/8″ X 6″ MASONRY DRILL BIT, 7/16″ X 13-1/2″ PREMIUM MASONRY BIT, 7/16″ X 6″ MASONRY DRILL BIT, 9/16″ X 6″ MASONRY DRILL BIT, 1/2″ X 12″ MASONRY DRILL BIT, 1/2″ X 24″ MASONRY DRILL BIT, 1/2″ X 6″ MASONRY DRILL BIT, 5/8″ X 12″ MASONRY DRILL BIT, 5/8″ X 24″ MASONRY DRILL BIT, 5/8″ X 6″ MASONRY DRILL BIT, 3/4″ X 12″ MASONRY DRILL BIT, 3/4″ X 24″ MASONRY DRILL BIT, 3/4″ X 6″ MASONRY DRILL BIT, 7/8″ X 12″ MASONRY DRILL BIT, 7/8″ X 6″ MASONRY DRILL BIT, 1-1/4″ X 6″ MASONRY DRILL BIT, 1″ X 12″ MASONRY DRILL BIT, 1″ X 6″ MASONRY DRILL BIT |
|---|
TruCut Masonry Bits
Premium quality masonry drill bits with heavy duty carbide tips. The bits have a longer life at higher speeds toue to "Super H" grade carbide tips.
Related Products
-
Read MoreQuick ViewJobber Drill Bits, Fractional Sizes
Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a black oxide finish.
These bits are in Fractional size. American Wire Size bits are listed separately. Click the Jobbers tab below to see more. -
Read MoreQuick ViewCountersink Bits Set, 4 or 9 Pc
Countersinking screws is a often used method for ensuring a flush surface, without bumps of screwheads getting in the way. These cross-hole countersinks are specially designed so that the trailing edge of the hole makes the cut, and they excel at ejecting chips as they drill. Made of strong steel, they ensure years of precision work.
Available in a 9 piece or 4 piece set. -
Quick ViewSpade Drill Bits
Spade bits are used for rough boring in wood. Spade bits are flat, with a centering point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. Intended for high speed use, they are used with electric hand drills. Spade bits are also sometimes referred to as “paddle bits”. Available in 1/4″ – 1-1/2″.
-
Read MoreQuick ViewEuroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.
-
Quick ViewBit Holder
Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits.
-
Read MoreQuick ViewGlass & Tile Bits
These bits are made specifically to cut cleanly through glass and ceramic tile.
-
Read MoreQuick ViewJobber Drill Bits, Wire Size
Jobber Drill Bits are made from high-speed steel, with a 118° angle tip, and a black oxide finish.
These bits are in American Wire Size. Fractional size bits are listed separately. Click on the Jobbers tag below to see more. -
Read MoreQuick ViewCountersink Drill Bits
Countersinking screws is a often used method for ensuring a flush surface, without bumps of screwheads getting in the way. These cross-hole countersinks are specially designed so that the trailing edge of the hole makes the cut, and they excel at ejecting chips as they drill. Made of strong steel, they ensure years of precision work.
-
Quick ViewHSS Black Oxide Drill Bits
The HSS Black Oxide bits are made in the USA with a 118 degree point and are available from 1/32″ to 11/16″.e”]
-
Quick ViewImpactech Magnetic Nutsetter Hex Bit
Made from S2 modified shock resistant steel for professional performance and durability. Featuring a patented spiral torsion zone absorbs impact and extends bit life. Proprietary precision CNC machined tips for excellent fit in fastener recess. Tested to outperform all leading brands in lifecycle and tip failure testing. Made with a high strength industrial magnet for securing your bits.
