Makita XGT 40V 9′ to 13′ Telescoping Pole Saw, 10″ Bar

Additional information

The 40V max XGT® Brushless 10" Telescoping Pole Saw (GAU02) easily adjusts from 9-ft. to 13-ft. in length to allow the user to reach higher and trim branches with ease. The Makita-built brushless motor delivers the power of a 35cc gas pole saw to the 10" bar and chain. The 40V max XGT® delivers up to 150 cuts in 4x4 cedar on a single charge of an XGT® 4.0Ah battery, allowing the user to cut and trim for longer periods of time.

The Pole Saw has convenience features that include a lateral chain tensioner with a single stud for efficient chain retention and a captured bar nut that is retained in the sprocket cover for easier setup and maintenance. There is also a translucent bar oil tank with a large opening that aids in adding oil and keeping the bar properly lubricated. Additional features include Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if the rotation of the attachment is suddenly forced to stop.

Durability features include Extreme Protection Technology (XPT™) for improved dust and water resistance, and IPX4 weather-resistant construction.

XGT® is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT® is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

POWER : Makita-built brushless motor delivers the power of a 35cc gas pole saw
DESIGN : Telescoping shaft adjusts length from 9 ft. to 13 ft. allowing access to hard-to-reach branches
SPEED : Up to 30% faster than gas
RUN TIME : Up to 150 cuts in 4x4 cedar with 40V XGT® 4.0Ah battery

GAU02Z INCLUDES : 10" guide bar, 10" saw chain, file with file guide, and harness
GAU02M1 INCLUDES : (1) 40V max XGT® Lithium-Ion 4.0Ah battery, rapid charger, 10" guide bar, 10" saw chain, file with file guide, and harness

• OUTPOWER: Makita-built brushless motor delivers the power of a 35cc gas pole saw
• OUTSMART: Up to 30% faster than gas*
• OUTLAST: Up to 150 cuts in 4x4 cedar with 40V XGT® 4.0Ah battery
• Telescoping shaft easily adjusts length from 9 ft. to 13 ft. allowing access to hard-to-reach branches
• Lateral chain tensioning with single stud for efficient chain retention
• Captured bar nut is retained in sprocket cover for convenient setup and maintenance
• Branch hook for pulling trimmed branches from trees
• Translucent bar oil tank with large opening for easier refilling
• Includes 10" sprocket nose guide bar and 3/8" low profile pitch, .050" gauge chain
• IPX4 weather-resistant construction for durability and long life
• Extreme Protection Technology (XPT™) engineered for improved dust and water resistance
• Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of the attachment is suddenly forced to stop
• The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
• XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
• XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
• The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
• The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
• The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
• Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
• Only use genuine Makita batteries and chargers
• 3-year limited warranty

*Compared to 36.3cc gas pole saw cutting speed

A NEW SYSTEM OF EQUIPMENT & TOOLS
XGT® is a new 40V | 80V max system of cordless equipment and tools. XGT® outpowers, outsmarts, and outlasts the rest. Through Makita’s innovative engineering, the technology within XGT® will lead to creating the equipment and tools of the future.

GET A COMPLETELY CORDLESS JOBSITE
The LXT® System handles most applications, but for high-demand applications that use corded, gas or air, the XGT System delivers higher-powered solutions. With 40V max and 80V max XGT® Products, pros can fully experience a battery-powered job site.

RARE EARTH MAGNETS & PURE COPPER WIRE
Rare earth magnets of the highest quality are engineered within the brushless motors to maximize power and performance.
Makita® XGT Products feature purpose-built brushless motors with more copper windings for increased power output.

BUILT-IN MICROCHIPS & DIGITAL COMMUNICATION
Built-in microchips in both tool and battery allow for real-time digital communication, actively monitoring heat, overload, and over-discharge.
Digital communication between XGT Tools and Batteries through enhanced digital communication technology optimize performance to deliver up to 2X longer sustained power during demanding applications.

IMPACT ABSORBENT STRUCTURE & WATER AND DUST RESISTANCE
Durable outer casing and cell holder create space within the battery to absorb impact.
Water and dust-resistant triple layer structure and an enhanced terminal structure are engineered to protect against water and dust for any job site condition.

MULTI-LAYER SURFACE CONTACTS & RAPID OPTIMUM CHARGING SYSTEM
Multi-layer surface contacts within tool and battery are designed to take on high current demands.
XGT Charger and Dual Cooling Fans digitally communicates before and during the charging process, evaluating battery condition to deliver a consistent fast charge. It even charges 18V LXT Batteries with an adapter.