Makita Rebar Tying Tool Kit, 18V LXT
Makita has delivered a cordless tying solution for rebar and steel rod with the 18V LXT Lithium-Ion Brushless Cordless Rebar Tying Tool Kit (model XRT01TK). The 18V LXT Lithium-Ion Brushless Cordless Rebar Tying Tool has a tying capacity of up to 5,300 ties of #3 x #3 diameter rebar on a single charge. Tie multiple bars in under one second. The tool can also tie up to two #5 diameter bars or four #4 diameter bars.
The 18V LXT Lithium-Ion Brushless Cordless Rebar Tying Tool features 2 modes of operation, single or continuous. Users can digitally adjust the tying strength to match various tension strength requirements.
- Description
- Features
Makita has delivered a cordless tying solution for rebar and steel rod with the 18V LXT Lithium-Ion Brushless Cordless Rebar Tying Tool Kit (model XRT01TK). The 18V LXT Lithium-Ion Brushless Cordless Rebar Tying Tool has a tying capacity of up to 5,300 ties of #3 x #3 diameter rebar on a single charge. Tie multiple bars in under one second. The tool can also tie up to two #5 diameter bars or four #4 diameter bars.
The 18V LXT Lithium-Ion Brushless Cordless Rebar Tying Tool features 2 modes of operation, single or continuous, and a BL™ Brushless Motor that’s engineered to run cooler and more efficiently for a longer life than standard motors. Users can digitally adjust the tying strength to match various tension strength requirements. The XRT01ZK features an easy-load wire reel design with an automatic locking mechanism built into the protective cover. The tool delivers up to 120 ties of #3 x #3 rebar per wire reel for maximum productivity.
It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
The kit includes the 18V LXT Lithium-Ion Brushless Cordless Rebar Tying Tool (model XRT01ZK), two 5.0Ah batteries, a rapid optimum charger, hex wrench, belt clip, and tool bag.
RUN TIME : Up to 5,300 ties of #3 x #3 diameter rebar using an 18V LXT® 5.0Ah Battery
PRODUCTIVITY : 2-mode operation provides single or continuous wire tie actuation for fast and efficient tying
CONVENIENCE : Wire reel easy-load design with automatic locking mechanism built into protective cover
SERVICE : 3-year limited warranty with 3-day repair on Fastlane Express Service
INCLUDES : (2) 18V LXT® Lithium-Ion 5.0Ah batteries, rapid optimum charger, belt clip, hex wrench and tool case
- Up to 5,300 ties of #3 x #3 diameter rebar using an 18V LXT® 5.0Ah Battery
- Multiple bar tying capability; ties up to two #5 diameter bars or four #4 diameter bars in under 1 second
- 2-mode operation provides single or continuous wire tie actuation for fast and efficient tying
- Fast and seamless wire reel easy-load design with automatic locking mechanism built into protective cover
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Digital adjustment of tying strength to match various tension strength requirements
- Delivers up to 120 ties of #3 x #3 rebar per wire reel allowing for maximum productivity
- 3-year limited warranty with 3-day repair on Fastlane Express Service
- Trigger power switch with lock-off feature requires two actions to power the tool
- Center load reel position provides added balance for more comfortable handling and less fatigue
- Transparent wire reel cover protects the feeding mechanism from harmful job site debris
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Ergonomic rubberized soft handle for increased comfort
- Belt clip allows the tool to remain close to operator at all times
- Weighs only 5.7 lbs. with 18V LXT® battery for reduced operator fatigue
- Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
- 18V LXT® Lithium-Ion 5.0Ah battery BL1850B, features an integrated L.E.D. battery charge level indicator
- 18V LXT® Lithium-Ion 5.0Ah battery BL1850B provides up to 65% more run time per charge compared to BL1830
- 18V LXT® Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45 minutes or less
- Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
- Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
- 3-year limited warranty
Related Products
-
Makita 13″ Jobsite Fan 3-Speed, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless 13”Job Site Fan (DCF300Z) is another portable and powerful cordless solution for contractors. Up to 5.7 hours of portable air flow with the 18V LXT® Lithium-Ion 5.0 Ah battery makes this ideal for improved air circulation in close quarters, increased air flow for painters, and more. Three speed settings and an oscillation selector lets the user select optimal air velocity and control. For added convenience, the 3-stage automatic timer offers 1, 2 and 4-hour power-off selection. The fan has a durable design and the protective bumpers are engineered to withstand a job site environment.
-
Makita 1/2″ Angle Drill w/Cord
Tackle hard-to-reach plumbing work with the Makita 1/2 in. Right Angle Drill (model DA4031). The drill can handle steel up to 1/2 in. thick and wood up to 4-5/8 in. at difficult angles with its Sidewinder handle that rotates 90 degrees left or right. The powerful 10 Amp motor offers precise variable speed control across 2 ranges, 0 – 1,200 RPM and 0 – 300 RPM. Additional features include an adjustable top handle and an ergonomic rubberized grip.
-
Makita Subcompact Radio /Impact /Driver Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX301RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless driver-drill that weighs only 2.8 lbs., and a variable speed brushless impact driver that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes an 18V LXT® Job Site Radio with Bluetooth® and MP3 compatibility. The kit includes two 18V LXT® Compact 2.0Ah batteries, which feature an integrated L.E.D. battery charge level indicator.
-
Makita 10″ Table Saw with Stand
Makita’s 10” Contractor Table Saw with Portable Stand is a versatile and powerful table saw for use in the shop or on the jobsite. It combines a range of convenience and ease-of-use features with large capacity and 15 AMP power, making it a true best-in-class table saw for a range of professional applications. The portable stand is jobsite tough for easy transport.
The 2705X1 is a versatile and powerful table saw for use in the shop or on the job site. It’s engineered for remodelers, furniture makers, finish carpenters, cabinet installers, decking and flooring contractors, and general contractors seeking a best-in-class 10” Contractor table saw for the jobsite or on the benchtop. -
Makita 2″ Brad Nailer 18 Gauge
Makita’s 2-inch Brad Nailer features a durable and compact design with ease-of-use features including a narrow-nose design that make it ideal for a wide variety of finish applications.
The AF505N can operate from 60 to 115 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch. The magazine capacity is up to 100 nails, with a quick release cam-lock to open the nail guide assembly to easily clear jams. -
Makita 7″ Loop Handle Polisher
Automotive detailers, marine enthusiasts and stone polishers rely on Makita polishers for high-quality detailing and polishing. The 7” Polisher Model 9237C combines consistent power and speed control with new durability and performance features. The result is a fast and powerful polisher for clear coat finishes, stone polishing, and more.
Detailers will appreciate the variable speed dial and trigger so they can match the speed to the application, and the constant speed control is engineered to maintain consistent speed even under load. The 9237C has a rubberized loop handle that provides added comfort for users and added protection for delicate work surfaces. For increased durability, the Polisher has a wire mesh intake cover to prevent wool bonnet fibers and other debris from entering the motor. -
Makita 5″ Angle Ginder with Paddle Switch
Makita’s 5” SJS™ Angle Grinder combines 13 AMP power and variable speed, with paddle switch comfort and motor-protection features for longer-lasting industrial performance. The 9565PCV is engineered with Makita’s innovative SJS™ mechanical clutch system to protect the gears for longer tool life.
-
Makita Subcompact Impact /Hammer Drill Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX202RB is a combo kit with two 18V Sub-Compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless hammer driver-drill with two speed settings that weighs only 2.8 lbs. The percussive hammer-drill setting allows for drilling into masonry and brick. The variable speed brushless impact driver has two speed settings and weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries,which feature an integrated L.E.D. battery charge level indicator.
-
Makita Subcompact Impact /Drill Driver Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX200RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless driver-drill with two speed settings that weighs only 2.8 lbs., and a variable speed brushless impact driver with two speed settings that weighs only 2.6 lbs. There are also two 18V LXT® Compact 2.0Ah batteries, which feature an integrated L.E.D. battery charge level indicator.
-
Makita 3-1/2″ Framing Coil Nailer
The Makita 3-1/2″ Framing Coil Nailer combines power with less weight for increased performance and versatility. The AN902 weighs only 7.7 lbs. but drives 1-3/4″ to 3-1/2″ coil framing nails. Additional features include a “tool-less” depth adjustment engineered for more precise flush and countersink nailing and a contact mode trigger. The AN902 is ideal for framing, sheathing, fencing, decking and more.