Makita AWS Wireless Bluetooth Unit
Auto-Start Wireless System technology (AWS™) utilizes Bluetooth® technology for wireless communication between the equipped tool and dust extractor (all sold separately). The Wireless Unit, AWS™ (198501-5) is for use with connecting Makita tools to a Makita dust extractor.
- Description
- Features
Auto-Start Wireless System technology (AWS™) utilizes Bluetooth® technology for wireless communication between the equipped tool and dust extractor (all sold separately). The Wireless Unit, AWS™ (198501-5) is for use with connecting Makita tools to a Makita dust extractor.
INNOVATION : AWS™ for wireless power-on/off communication with dust extractor
PRODUCTIVITY : Provides intelligent communication between your tools to eliminate cords and increase productivity
TECHNOLOGY : Utilizes Bluetooth® technology for wireless power-on/off communication
EFFICIENCY : Efficient design for convenient operation
INCLUDES : Wireless Transmitter
- Automatic-Start Wireless System (AWS™) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor
- Provides intelligent communication between your tools to eliminate cords, increase productivity, and reduce noise
- Efficient design for convenient operation
- Enables wireless connection of Makita AWS™ capable tools with Dust Extractor/Vacuum model XCV08
Related Products
-
Makita 14″ Chain Saw Kit, LXT 18V X2 (36V)
Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT® (36V) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.
The XCU03PT has a 14” guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there’s no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a “tool-less” chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.
It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
-
Makita 1/2″ Angle Drill w/Cord
Tackle hard-to-reach plumbing work with the Makita 1/2 in. Right Angle Drill (model DA4031). The drill can handle steel up to 1/2 in. thick and wood up to 4-5/8 in. at difficult angles with its Sidewinder handle that rotates 90 degrees left or right. The powerful 10 Amp motor offers precise variable speed control across 2 ranges, 0 – 1,200 RPM and 0 – 300 RPM. Additional features include an adjustable top handle and an ergonomic rubberized grip.
-
Makita 13″ Jobsite Fan 3-Speed, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless 13”Job Site Fan (DCF300Z) is another portable and powerful cordless solution for contractors. Up to 5.7 hours of portable air flow with the 18V LXT® Lithium-Ion 5.0 Ah battery makes this ideal for improved air circulation in close quarters, increased air flow for painters, and more. Three speed settings and an oscillation selector lets the user select optimal air velocity and control. For added convenience, the 3-stage automatic timer offers 1, 2 and 4-hour power-off selection. The fan has a durable design and the protective bumpers are engineered to withstand a job site environment.
-
Makita Subcompact Radio /Impact /Driver Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX301RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless driver-drill that weighs only 2.8 lbs., and a variable speed brushless impact driver that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes an 18V LXT® Job Site Radio with Bluetooth® and MP3 compatibility. The kit includes two 18V LXT® Compact 2.0Ah batteries, which feature an integrated L.E.D. battery charge level indicator.
-
Makita 4-1/2″ Paddle Swtch Grinder w/Cord
Makita’s 4-1/2” Angle Grinder combines 7.5 AMP power with comfort and motor-protection features for longer-lasting industrial performance. The 9557PB Angle Grinder delivers 11,000 RPM, with soft start for smooth start-ups. The Angle Grinder also features a range of durability features including labyrinth construction which seals and protects the motor and bearings from dust and debris for longer tool life, as well as a protective zig-zig varnish engineered to seal the armature from dust and debris.
-
Makita 2″ Brad Nailer 18 Gauge
Makita’s 2-inch Brad Nailer features a durable and compact design with ease-of-use features including a narrow-nose design that make it ideal for a wide variety of finish applications.
The AF505N can operate from 60 to 115 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch. The magazine capacity is up to 100 nails, with a quick release cam-lock to open the nail guide assembly to easily clear jams. -
Makita 3-1/2″ Framing Coil Nailer
The Makita 3-1/2″ Framing Coil Nailer combines power with less weight for increased performance and versatility. The AN902 weighs only 7.7 lbs. but drives 1-3/4″ to 3-1/2″ coil framing nails. Additional features include a “tool-less” depth adjustment engineered for more precise flush and countersink nailing and a contact mode trigger. The AN902 is ideal for framing, sheathing, fencing, decking and more.
-
Makita 7-1/4″ Circular Saw
Makita engineered the 7-1/4” Circular Saw (model 5007F) with pro framers in mind, combining power and performance with ease-of-use features, superior balance, and job site durability. The 5007F is ideal for a range of framing and cutting applications.
The 5007F is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, masons, carpenters, and general contractors seeking a best-in-class 7-1/4” circular saw. -
Makita 1-3/4″ Coil Roofing Nailer
The Makita 1-3/4″ Roofing Coil Nailer combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter coil roofing nails, from 3/4” to 1-3/4” in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister.
Ease-of-use features include a “tool-less” depth adjustment, engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool. -
Makita Multi‑Tool Kit
Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.
Power and Performance
The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding.
The TM3010CX1 also features a range of comfort and convenience features including reduced vibration (6 m/s²) and lower noise (74dB), a small diameter barrel grip, and a large on/off slide switch with lock-on button. The “tool-less” clamp system provides easier removal and installation of accessories.
The TM3010CX1 is engineered for a full range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class multi-tool.