Makita 9” Power Cutter Kit, 36V (18V X2) LXT

Makita 3-Speed Hand Vacuum, 18V LXT
Makita AWS, HEPA Dust Extractor Vacuum, 4 Gal, 18V X2 LXT

Makita 9” Power Cutter Kit, 36V (18V X2) LXT

The Makita 36V (18V X2) LXT® Brushless 9” Power Cutter Kit (XEC01PT1) has the power to cut through various materials with all the benefits and convenience of cordless operation. The XEC01PT1 has a maximum cutting depth of 3-1/2”, thus can cut through standard residential concrete slab in a single pass. Besides concrete, it has the power to cut through I-beams, steel pipe (3”), rebar (3/4” -#6), metal stud (14” wide) and more.
The XEC01PT1 is a cordless solution for masons, roofers, plumbers, remodelers, construction workers, landscape and hardscape workers, metal fabricators, commercial framers, pipe fitters, vehicle mechanics, firefighters, and more.
The kit includes the power cutter, four 18V LXT 5.0Ah Batteries, a dual-port charger, and a Diamond Blade and Cut-Off Wheel.

Add to Project List
Add to quote
SKU: MAKXEC01PT1 Categories: , , Tags: , , , , , , , ,
  • Description
  • Features

The Makita 36V (18V X2) LXT® Brushless 9” Power Cutter Kit (XEC01PT1) has the power to cut through various materials with all the benefits and convenience of cordless operation. The XEC01PT1 has a maximum cutting depth of 3-1/2”, thus can cut through standard residential concrete slab in a single pass. Besides concrete, it has the power to cut through I-beams, steel pipe (3”), rebar (3/4” -#6), metal stud (14” wide) and more.

The benefits of a cordless power cutter over a gas power cutter include no oil/gas mixing, no emissions, no pull starts, no engine maintenance, and lighter weight. This means reduced operator fatigue, instant starts, cost savings, and the ability to use the power cutter indoors, in tight spaces, and high elevations. An integrated water delivery system continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications. Water flow is controlled with an adjustment knob.

The belt-drive design provides smoother operation with lower vibration. The XEC01PT1 has a purpose-built BL™ Brushless Motor, which eliminates carbon brushes and enables the motor to run cooler and more efficiently for longer life. The brushless motor delivers 6,600 RPM. Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop. An electric brake stops the wheel in 4 seconds or less allowing for faster re-positioning. And Makita's Extreme Protection Technology (XPT™) is designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components.

It’s part of Makita’s expanding 18V LXT System, the world’s largest cordless tool system powered by 18V lithium-ion slide-style batteries. Makita® 18V LXT Lithium-Ion Batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita® 18V LXT® Lithium-Ion Batteries with the star symbol on the battery indicating Star Protection inside.

Other features of the cordless power cutter include a built-in L.E.D. light, large spindle lock button for easier wheel changes, rubberized front handle for comfort, a lock-off power switch and soft start, integrated overload indicator, L.E.D. battery charge indicator, and protective battery compartment.

The XEC01PT1 is a cordless solution for masons, roofers, plumbers, remodelers, construction workers, landscape and hardscape workers, metal fabricators, commercial framers, pipe fitters, vehicle mechanics, firefighters, and more.

The kit includes the power cutter, four 18V LXT 5.0Ah Batteries, a dual-port charger, and a Diamond Blade and Cut-Off Wheel.

POWER : The BL™ Brushless Motor powered by two 18V LXT® batteries eliminate the hassle of engine pull starts
CAPACITY : Makes single pass cuts up to 3-1/2" in various materials
CONTROL : AFT® turns the motor off if rotation of the wheel is suddenly forced to stop
DUST MANAGEMENT : Integrated water delivery continuously feeds water for OSHA Table 1 Compliance
INCLUDES : 4 ea. 18V LXT® 5.0Ah batteries, dual port rapid charger, diamond blade, cut-off wheel and socket wrench

  • Eliminates the hassles of gas with lower weight, reduced maintenance, and zero emissions allowing use in indoor environments
  • The BL™ Brushless Motor powered by two 18V LXT® Lithium-Ion batteries eliminate the hassle of engine pull starts allowing immediate starts-up
  • The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life; delivers 6,600 RPM
  • Integrated water delivery system with water flow adjustment knob continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications
  • Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
  • Electric brake stops the wheel in 4 seconds or less allowing for faster re-positioning
  • Built-in L.E.D. light with an independent on/off switch illuminates the cutting area for increased visibility
  • Makes single pass cuts up to a 3-1/2" depth in various masonry and metal materials
  • Integrated overload indicator alerts of excessive battery power draw during heavy loads
  • Overload protection is designed to protect the motor from burnout in abnormally high torque situations
  • Soft start suppresses start-up reaction for smoother start-ups and longer gear life
  • Protective battery compartment helps prevent dust and slurry contamination
  • Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
  • Rubberized front handle can be held in multiple positions for increased comfort at various cutting orientations
  • Belt-drive design provides smoother operation with lower vibration
  • Lock-off power switch requires two actions to start power
  • Large spindle lock button for easier wheel changes while wearing gloves
  • Lower noise at 114 dB(A) and smoother operation for continuous use over longer periods
  • Weighs only 13.7 lbs. with batteries for reduced operator fatigue
  • Integrated battery charge light indicator allows user to monitor battery charge level for each of the two batteries
  • 18V LXT® Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45 minutes or less
  • 18V LXT® Lithium-Ion 5.0Ah battery BL1850B, features an integrated L.E.D. battery charge level indicator
  • Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
  • Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
  • Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
  • Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger
  • 3-year limited warranty on tool, battery and charger

Related Products

  •
    Quick View

    Makita 14″ Chain Saw Kit, LXT 18V X2 (36V)

    Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT® (36V) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.

    The XCU03PT has a 14” guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there’s no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a “tool-less” chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

    It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

    For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

  •
    Quick View

    Makita 1-3/4″ Coil Roofing Nailer

    The Makita 1-3/4″ Roofing Coil Nailer combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter coil roofing nails, from 3/4” to 1-3/4” in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. 
    Ease-of-use features include a “tool-less” depth adjustment, engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

  •
    Quick View

    Makita 10″ Table Saw with Stand

    Makita’s 10” Contractor Table Saw with Portable Stand is a versatile and powerful table saw for use in the shop or on the jobsite. It combines a range of convenience and ease-of-use features with large capacity and 15 AMP power, making it a true best-in-class table saw for a range of professional applications. The portable stand is jobsite tough for easy transport.

    The 2705X1 is a versatile and powerful table saw for use in the shop or on the job site. It’s engineered for remodelers, furniture makers, finish carpenters, cabinet installers, decking and flooring contractors, and general contractors seeking a best-in-class 10” Contractor table saw for the jobsite or on the benchtop.

  •
    Quick View

    Makita 2″ Brad Nailer 18 Gauge

    Makita’s 2-inch Brad Nailer features a durable and compact design with ease-of-use features including a narrow-nose design that make it ideal for a wide variety of finish applications.

    The AF505N can operate from 60 to 115 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch. The magazine capacity is up to 100 nails, with a quick release cam-lock to open the nail guide assembly to easily clear jams.

  •
    Quick View

    Makita Subcompact Impact /Hammer Drill Kit, 18V LXT

    Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX202RB is a combo kit with two 18V Sub-Compact solutions for drilling, driving and fastening.

    The kit includes an ultra-compact 2-speed brushless hammer driver-drill with two speed settings that weighs only 2.8 lbs. The percussive hammer-drill setting allows for drilling into masonry and brick. The variable speed brushless impact driver has two speed settings and weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries,which feature an integrated L.E.D. battery charge level indicator.   

  •
    Quick View

    Makita 5″ Angle Grinder with SJS Tech

    Makita’s 5” SJS™ Angle Grinder combines 13 AMP variable speed power with comfort and motor-protection features for longer-lasting stone grinding and polishing performance. The 9565CV is engineered with Makita’s innovative SJS™ mechanical clutch system to protect the gears for longer tool life.

    The 9565CV is a versatile and powerful grinder with variable speed, allowing the user to set the RPM to the material. The variable speed control feature makes the 9565CV ideal for stone work, including polishing and grinding.

  •
    Quick View

    Makita 13″ Jobsite Fan 3-Speed, 18V LXT

    The Makita 18V LXT® Lithium-Ion Cordless 13”Job Site Fan (DCF300Z) is another portable and powerful cordless solution for contractors. Up to 5.7 hours of portable air flow with the 18V LXT® Lithium-Ion 5.0 Ah battery makes this ideal for improved air circulation in close quarters, increased air flow for painters, and more. Three speed settings and an oscillation selector lets the user select optimal air velocity and control. For added convenience, the 3-stage automatic timer offers 1, 2 and 4-hour power-off selection. The fan has a durable design and the protective bumpers are engineered to withstand a job site environment.

  •
    Quick View

    Makita 4-1/2″ Paddle Swtch Grinder w/Cord

    Makita’s 4-1/2” Angle Grinder combines 7.5 AMP power with comfort and motor-protection features for longer-lasting industrial performance. The 9557PB Angle Grinder delivers 11,000 RPM, with soft start for smooth start-ups. The Angle Grinder also features a range of durability features including labyrinth construction which seals and protects the motor and bearings from dust and debris for longer tool life, as well as a protective zig-zig varnish engineered to seal the armature from dust and debris.

  •
    Quick View

    Makita Subcompact Radio /Impact /Driver Kit, 18V LXT

    Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX301RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.

    The kit includes an ultra-compact 2-speed brushless driver-drill that weighs only 2.8 lbs., and a variable speed brushless impact driver that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes an 18V LXT® Job Site Radio with Bluetooth® and MP3 compatibility. The kit includes two 18V LXT® Compact 2.0Ah batteries, which feature an integrated L.E.D. battery charge level indicator.

  •
    Quick View

    Makita Couple Shaft Bristle Brush Attachment 23-5/8″

    The Makita Bristle Brush Couple Shaft Attachment is the perfect accessory for Makita 18V X2 LXT (36V) and MM4 4-Stroke Engine Couple Shaft Power Heads (sold separately). The Bristle Brush Couple Shaft Attachment features a wide sweeping surface of 23-5/8” and durable nylon bristles for optimum performance. The steel drive shaft reduces vibration and increases equipment life.