Makita 9/16″ Hollow Sockets
The Makita Hollow Sockets are designed to accelerate overhead fastening work by reducing time-spent hand threading fasteners over threaded rod. The hollow shafts allow long bolts and threaded rod to pass through in fastening applications while the increased socket lengths provide better access to nuts located in high places in ceiling or ductwork. The 1/4” hex shank is press-fit for durability and drops readily into an impact driver or driver-drill for convenient, automated fastening.
- Additional information
- Description
- Features
Additional information
| Size | 9/16″ x 6″, 9/16″ x 12″, 9/16″ x 24″ |
|---|
The Makita Hollow Sockets are designed to accelerate overhead fastening work by reducing time-spent hand threading fasteners over threaded rod. The hollow shafts allow long bolts and threaded rod to pass through in fastening applications while the increased socket lengths provide better access to nuts located in high places in ceiling or ductwork. The 1/4” hex shank is press-fit for durability and drops readily into an impact driver or driver-drill for convenient, automated fastening.
SPEED : Hollow socket accelerates fastening over extra long bolts and threaded rod, no more hand-threading
CONVENIENCE : Increased socket length provides better accessibility to nuts in hard to reach places
COMFORT : Lightweight for easy overhead use and reduced wear on the user
DURABILITY : Press-fit shank and corrosion resistant shaft for extra durability and long life
INCLUDES : 9/16" Hollow Sockets, 6", 12", or 24"
- Impact and drill-ready hollow socket design saves time and speeds up fastening applications over extra long bolts, studs and threaded rod
- 12 point socket provides easy fitment over 6 and 12-point fasteners
- Additional socket length provides better accessibility to nuts in hard to reach places
- Axial press-fit 1/4” hex shank provides greater durability and torsional strength compared to a one-piece hollow socket
- Smooth, chamfered inner well prevents shaft from biting and ruining threads for easy fastening and unfastening
- Corrosion resistant finish for long life
- Lightweight for easy overhead use and reduced wear on the user
- Ideal for overhead work on ducts, pipe, studs and threaded rod
- 1/4" hex shank works directly with both impact drivers and drill-drivers
Related Products
-
Read MoreQuick ViewCeiling Flange, Copper
Ceiling flanges are used to secure threaded rod to a ceiling, so that equipment can be attached to the threaded rod. These flanges are designed to either support 3/8″-16 rod, or 1/2″-13 rod. They have a copper finish, and are excellent choice for interior open ceiling situations where their color will complement other equipment.
-
Quick ViewPurlin Clamp, 3/8″
Purlin clamps provide structural attachment specifically to the purlins that support a roof. Most commonly used to attach threaded rod used to support HVAC duct-work, lights, and other hardware in the open or closed ceiling space of a room.
-
Read MoreQuick View
POWER-Skru Bolt Anchors
The POWER-Skru Bolt Anchor is a high-strength screw anchorwith self-taping threads that offer a unique undercutting design for anchoring into concrete and masonry. No secondary setting is needed. The POWER-Skru Bolt Anchor provides high-strength performance with low installation torque. A heavy-duty mechanically-galvanized finish is available to enhance corrosion resistance.
Can be used with almost any material, including:
- Racking
- Railing Sill
- Stadium Seating
- Tilt up Braces
- Formwork
- Anchoring Equipment
-
Quick View
U-Bolt Style Beam to Channel Clamp
The U-Bolt style beam-to-channel clamp features a piece of bent plate and a u-bolt that is threaded on both sides to secure a strut in place against a beam. The strut is fed through the u-bolt, which is then tightened to secure both the plate to the beam and the strut to the plate. U-style beam clamps can be used to secure strut to either the underside of the beam or the inside of the beam, depending on the configuration of the clamp.
-
Quick View
Elite Clevis Hanger
A clevis hanger consists of one U-shaped clevis and a second V-shaped clevis with a hole in a flattened section at the base of the V, joined together with a bolt. Clevis hangers are used as a pipe attachment providing vertical adjustment for pipes
-
Sleeve-TITE Sleeve Expansion Anchors
Sleeve-TITE Expansion Anchors come fully assembled and ready to use. This speeds installation and eliminates the p
roblem of missing components. Sleeve-TITE is suitable for a wide variety of applications and available with acorn or hex nut, or flat head, or with rod coupling.Can be used with almost any material, including:
- Normal Weight Concrete
- Lightweight Concrete
- Hollow Masonry
- Solid Masonry
-
HotQuick View
Ankr-TITE® CCAT Cracked Concrete Wedge Anchors
The CCAT Cracked Concrete Wedge Anchors are engineered to provide superior performance in cracked concrete in both seismic and wind load conditions.
-
Read MoreQuick View
Clevis Pipe Hanger, Plain
A clevis hanger is a pipe attachment providing vertical adjustment, consisting of a clevis type top bolted to a formed steel bottom strap. They are recommended for the suspension of non-insulated, stationary pipe lines. These hangers have a natural, or plain, black finish, and are suitable for any interior uses.
-
Read MoreQuick View
Anchor Bolts, L-Bolts
-
HotQuick View
Hex Head Cap Screws – Grade 5
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 5 is the most common grade used in manufacturing assembly. Zinc plating, retards the corrosion rate in a normal atmosphere. Tensile Strength: 120,000 psi minimum.
