Elite Beam Clamp
Elite Beam Clamps are used as structural attachments to the top or bottom of metal beams, purlins, channel, or angle iron.
- Description
- Key Features
- Tech Specs
- Downloads
Description
Elite Beam Clamps are used as structural attachments to the top or bottom of metal beams, purlins, channel, or angle iron.
- BEAM CLAMPS
- Small Mouth
- Model BC1
- SIZE:
- 3/8″ thru 3/4″ rod sizes
- FINISH:
- Electro-Galvanized & Plain
- FUNCTION:
- Structural attachment to top or bottom of metal beams, purlins, channel, or angle iron
- Set screw made of hardened steel
- Complied with Federal Specification A-A-1192A (Type 19) and MSS SP-69 (Type 19)
View Submittal Info: Elite Beam Clamp - Galvanized
View Submittal Info: Elite Beam Clamp - Standard
Related Products
-
Read MoreQuick ViewPOWER-Skru Bolt Anchors
The POWER-Skru Bolt Anchor is a high-strength screw anchorwith self-taping threads that offer a unique undercutting design for anchoring into concrete and masonry. No secondary setting is needed. The POWER-Skru Bolt Anchor provides high-strength performance with low installation torque. A heavy-duty mechanically-galvanized finish is available to enhance corrosion resistance.
Can be used with almost any material, including:
- Racking
- Railing Sill
- Stadium Seating
- Tilt up Braces
- Formwork
- Anchoring Equipment
-
HotQuick View
Hex Head Cap Screws – Grade 5
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 5 is the most common grade used in manufacturing assembly. Zinc plating, retards the corrosion rate in a normal atmosphere. Tensile Strength: 120,000 psi minimum. -
HotQuick View
Ankr-TITE® CCAT Cracked Concrete Wedge Anchors
The CCAT Cracked Concrete Wedge Anchors are engineered to provide superior performance in cracked concrete in both seismic and wind load conditions.
-
HotQuick View
Hex Head Cap Screws – Grade 2
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Plain finish, or bare metal, will have a coating of light oil to resist corrosion. Grade 2 is generally an economical but lower strength fastener. -
Read MoreQuick View
Sidewalk Bolt, Stainless Steel
Also known as shutter screws, the ultra-wide truss head distributes the load over a large area for excellent holding pressure when placing plywood, metal, and fabric hurricane panels or removable track. Made of 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic.
-
Read MoreQuick View
Ceiling Flange
Ceiling flanges are used to secure threaded rod to a ceiling, so that equipment can be attached to the threaded rod. These flanges are designed to either support 3/8″-16 rod, or 1/2″-13 rod. An electro-galvanized coating provides rust resistance., and are an excellent choice for any interior use, or in a covered open building space.
-
Quick View
Standard Riser Clamps (6200-6300)
Model 6200-6300 Standard Riser Clamps from Elite components are designed for standard iron pipe. They are available in either galvanized or plain and in sizes from 1/2″ thru 24″.
Compares with federal specifications A-A-1192A (Type 8) and ANSI/SP-69 and SP-58 (Type 8)
-
Sleeve-TITE Sleeve Expansion Anchors
Sleeve-TITE Expansion Anchors come fully assembled and ready to use. This speeds installation and eliminates the p
roblem of missing components. Sleeve-TITE is suitable for a wide variety of applications and available with acorn or hex nut, or flat head, or with rod coupling.Can be used with almost any material, including:
- Normal Weight Concrete
- Lightweight Concrete
- Hollow Masonry
- Solid Masonry
-
Wej-It Ultra-Drop™ Drop-In Anchors
The Ultra-Drop Drop In Anchor that requires relatively shallow embedment. It also eliminates the requirement for rod couplings in overhead applications.
The setting tool is used to expand the Drop-In anchors after they are placed in the drilled hole.
-
Quick View
Standard Riser Clamps (6400)
Model 6400 Standard Riser Clamps from Elite components are designed for copper tube sizes. They are available in carbon steel with Copper colored Epoxy (PC) and in sizes from 1/2″ thru 4″.Compares with federal specifications A-A-1192A (Type 8) and ANSI/SP-69 and SP-58 (Type 8)
