Dekfast Roof Screws, 10″ to 18″
Dekfast XHD High Strength Fasteners are ideal for insulation attachment to wood and light gauge steel. The SD#1 point cuts through gravel, BUR and metal up to 18ga. Black Sentri SP long=life coating provides extended corrosion protection. The #3PH pan head is compatible with all Dekfast insulation stress and membrane seam plates.
Longer sizes are available by special request.
FM and Dade County Approved.
- Additional information
- Description
- STRENGTH CHART
Additional information
| Size | #15 x 10″, #15 x 12″, #15 x 14″, #15 x 16″, #15 x 18″ |
|---|
Dekfast XHD High Strength Fasteners are ideal for insulation attachment to wood and light gauge steel. The SD#1 point cuts through gravel, BUR and metal up to 18ga. Black Sentri SP long=life coating provides extended corrosion protection. The #3PH pan head is compatible with all Dekfast insulation stress and membrane seam plates.
Longer sizes are available by special request.
Dekfast Strength Chart
Related Products
-
Read MoreQuick ViewAll Thread, Threaded Rod
Threaded rod has continuous threading, either on both ends or it may extend along the complete length of the rod. It has no head or fashioned tip. Threaded rod can be used as an anchor bolt, clamp, hanger or U-bolt.
Threaded rod is available in carbon steel, as Plain, Zinc Plated and HDG, as well as Stainless Steel and the B7/A193 alloy. -
Read MoreQuick View
Hex Cap Screws, Grades 2
A hex cap screw is a six-sided bolt with a trimmed hex head and a washer face on the bearing surface. Informally, it is also called a Finished Hex Bolt. Hex cap screws have tighter tolerances than standard bolts of the same size, and so are often used where precise tolerances are needed. The standard hex screw specifications include ASTM A449 and SAE J429 Grade-2.
-
Read MoreQuick View
F-Track Bolts
The square head of these F-Track Bolts fits perfectly into all flat and angled storm panel F-Track.
-
Read MoreQuick View
Mro Thread-Locker, 50ml Bottle
MRO Solutions thread-locking products are anaerobic compounds formulated for sealing, joining, fastening, retaining, and generally locking together metal components. Unlike other thread-lockers, MRO compounds are non-surface sensitive, so they do not require use of primers for curing.
Once parts are mated with MRO thread-lockers, they form a unitized assembly that resists vibration. In addition, the mated parts are sealed against attack from corrosion, internal rust, seizure, solvents, gases, and other chemicals. -
Read MoreQuick View
Pro-Tect System for Pool Enclosures
PRO-TECT Fastener Protection System consists of a nylon sleeve and a cap that, together, cover and protect the anchor screw. The PRO-TECT nylon sleeve gives protection from electrolysis, providing worry-free installation while extending the life of the product. This is very important for the harsh conditions of the coastal environments and extreme temperatures.
The PRO-TECT cap snaps onto the top of the nylon sleeve, covering the head of the Blue-Tap anchor screw. Due to its special design, the cap will not come off easily. Caps are available in White and Bronze.
By repelling water and preventing penetration, PRO-TECT reduces or eliminates the need for warranty work, increasing life expectancy of the structures. -
Quick View
PAM #8 X 2-1/2″ Roof Tile Screws
Stainless steel tile roofing screws for use with the PAM auto-feed screw system. These screws are #8 x 2-1/2″ and used for attaching roof tile to wood. The type 17 point improves penetration of tile.
Meets Miami-Dade County, FL Protocol PA 114-95, Appendix E, Section 2 (ASTM G85). Box of 1,000 screws. -
Read MoreQuick View
Square Plate Washer
Square plate washers are made from low carbon steel and have a larger surface area than round washers. Since they develop more friction when tightened against wood, they are often found in timber construction.
Often, square plate washers are used to attach treated lumber sill plates to concrete foundations. Another common use is using square plate washers to attach wood beams to the walls of a garage, and them mount the garage door rails and equipment. -
Read MoreQuick View
Hex Tap Bolts
The major distinguishing feature of hex tap bolts is that they are always fully threaded from under the head to the tip, no matter the size. Other features, such as chamfered point or washer bearing surface under the head, may be present, or may not. Tap bolts are meant to be used nuts to secure two objects together, but they also will fully seat into a tapped hole to secure one material to a base material.
They are available in Grade 2, Grade 5, and in Stainless Steel. -
Read MoreQuick View
Wing Nuts
Wing nuts are a type of specialty nut with a pair of wings to enable it to tighten without tools. The wings provide a grip for the thumb and finger for turning. They are commonly used where frequent adjustments or removals are needed, and can be made quickly at a later stage.
An alternative form of the wing nut has a washer built in, and is used to storm-proof the windows of a building. This washer face allows the wing nut to be used to secure plywood onto fixed anchors, where the hole in the plywood will be larger than the anchor studs it and the wing nut are being mounted on. This provides the advantage of having a larger surface bearing the pressure, while also eliminating the need of a separate washer that will often fall and get lost during storm-prep installation. -
Read MoreQuick View
Flat Washers, USS & SAE
