Dekfast Roof Screws, 10″ to 18″
Dekfast XHD High Strength Fasteners are ideal for insulation attachment to wood and light gauge steel. The SD#1 point cuts through gravel, BUR and metal up to 18ga. Black Sentri SP long=life coating provides extended corrosion protection. The #3PH pan head is compatible with all Dekfast insulation stress and membrane seam plates.
Longer sizes are available by special request.
FM and Dade County Approved.
- Additional information
- Description
- STRENGTH CHART
Additional information
| Size | #15 x 10″, #15 x 12″, #15 x 14″, #15 x 16″, #15 x 18″ |
|---|
Dekfast XHD High Strength Fasteners are ideal for insulation attachment to wood and light gauge steel. The SD#1 point cuts through gravel, BUR and metal up to 18ga. Black Sentri SP long=life coating provides extended corrosion protection. The #3PH pan head is compatible with all Dekfast insulation stress and membrane seam plates.
Longer sizes are available by special request.
Dekfast Strength Chart
Related Products
-
Read MoreQuick ViewMro Thread-Locker, 50ml Bottle
MRO Solutions thread-locking products are anaerobic compounds formulated for sealing, joining, fastening, retaining, and generally locking together metal components. Unlike other thread-lockers, MRO compounds are non-surface sensitive, so they do not require use of primers for curing.
Once parts are mated with MRO thread-lockers, they form a unitized assembly that resists vibration. In addition, the mated parts are sealed against attack from corrosion, internal rust, seizure, solvents, gases, and other chemicals. -
Quick View
Aluminum Key Hole Washer
Aluminum key-hole washers are commonly used with combo truss machine screws and sidewalk bolts. They are used as an additional backing plate when storm panels keyways do not line up correctly. They are also often used to provide additional backing when sidewalk bolts have been changed out to truss head screws. They can be placed on after panels are installed.
-
Read MoreQuick View
Hex Tap Bolts
The major distinguishing feature of hex tap bolts is that they are always fully threaded from under the head to the tip, no matter the size. Other features, such as chamfered point or washer bearing surface under the head, may be present, or may not. Tap bolts are meant to be used nuts to secure two objects together, but they also will fully seat into a tapped hole to secure one material to a base material.
They are available in Grade 2, Grade 5, and in Stainless Steel. -
Read MoreQuick View
Hex Cap Screws, Grades 8
A hex cap screw is a six-sided bolt with a trimmed hex head and a washer face on the bearing surface. Informally, it is also called a Finished Hex Bolt. Hex cap screws have tighter tolerances than standard bolts of the same size, and so are often used where precise tolerances are needed. The standard hex screw specifications include ASTM A449 and SAE J429 Grade-8.
-
Read MoreQuick View
Flat Washers, USS & SAE
-
Read MoreQuick View
Hex Cap Screws, Grades 2
A hex cap screw is a six-sided bolt with a trimmed hex head and a washer face on the bearing surface. Informally, it is also called a Finished Hex Bolt. Hex cap screws have tighter tolerances than standard bolts of the same size, and so are often used where precise tolerances are needed. The standard hex screw specifications include ASTM A449 and SAE J429 Grade-2.
-
Read MoreQuick View
Wing Nuts
Wing nuts are a type of specialty nut with a pair of wings to enable it to tighten without tools. The wings provide a grip for the thumb and finger for turning. They are commonly used where frequent adjustments or removals are needed, and can be made quickly at a later stage.
An alternative form of the wing nut has a washer built in, and is used to storm-proof the windows of a building. This washer face allows the wing nut to be used to secure plywood onto fixed anchors, where the hole in the plywood will be larger than the anchor studs it and the wing nut are being mounted on. This provides the advantage of having a larger surface bearing the pressure, while also eliminating the need of a separate washer that will often fall and get lost during storm-prep installation. -
Read MoreQuick View
Machine Screws
Machine screws are meant to hold two metal work pieces together, with the use of a threaded pre-tapped hole, or through a hole and held with a nut. They are threaded the entire length of the shank. For most styles of a machine screw, the length is measured from under the head to the end of the screw. For flat head machine screws, since they are intended to fit into a countersunk hole, their length is measured from the top of the screw head to the end of the screw.
-
Quick View
PAM #8 X 2-1/2″ Roof Tile Screws
Stainless steel tile roofing screws for use with the PAM auto-feed screw system. These screws are #8 x 2-1/2″ and used for attaching roof tile to wood. The type 17 point improves penetration of tile.
Meets Miami-Dade County, FL Protocol PA 114-95, Appendix E, Section 2 (ASTM G85). Box of 1,000 screws. -
Read MoreQuick View
Square Nuts, Zinc
As the name implies, square nuts have a 4-sided, square design. This square profile provides a greater bearing surface when installing onto a bolt. Square nuts are designed for use with square headed bolts, and the large surface provides better resistance to loosening. When using square nuts, as with hex nuts, use flat washers of the correct size and material.
